[1] |
Yanhua Zeng, Fenfen Yang, Zongning Chen, Enyu Guo, Minqiang Gao, Xuejian Wang, Huijun Kang, Tongmin Wang.
Enhancing mechanical properties and corrosion resistance of nickel-aluminum bronze via hot rolling process
[J]. J. Mater. Sci. Technol., 2021, 61(0): 186-196.
|
[2] |
Jun Jiang, Pengwan Chen, Weifu Sun.
Monitoring micro-structural evolution during aluminum sintering and understanding the sintering mechanism of aluminum nanoparticles: A molecular dynamics study
[J]. J. Mater. Sci. Technol., 2020, 57(0): 92-100.
|
[3] |
Liang Wu, Yugang Li, Xianfeng Li, Naiheng Ma, Haowei Wang.
Interactions between cadmium and multiple precipitates in an Al-Li-Cu alloy: Improving aging kinetics and precipitation hardening
[J]. J. Mater. Sci. Technol., 2020, 46(0): 44-49.
|
[4] |
Yuchen Liu, Yu Zhou, Dechang Jia, Juanli Zhao, Banghui Wang, Yuanyuan Cui, Qian Li, Bin Liu.
Composition dependent intrinsic defect structures in ASnO3 (A = Ca, Sr, Ba)
[J]. J. Mater. Sci. Technol., 2020, 42(0): 212-219.
|
[5] |
Zhuosen Wang, Xijun Xu, Shaomin Ji, Zhengbo Liu, Dechao Zhang, Jiadong Shen, Jun Liu.
Recent progress of flexible sulfur cathode based on carbon host for lithium-sulfur batteries
[J]. J. Mater. Sci. Technol., 2020, 55(0): 56-72.
|
[6] |
Xiawei Yang, Wenya Li, Siqi Yu, Yaxin Xu, Kaiwei Hu, Yaobang Zhao.
Electrochemical characterization and microstructure of cold sprayed AA5083/Al2O3 composite coatings
[J]. J. Mater. Sci. Technol., 2020, 59(0): 117-128.
|
[7] |
Qiyang Tan, Yingang Liu, Zhiqi Fan, Jingqi Zhang, Yu Yin, Ming-Xing Zhang.
Effect of processing parameters on the densification of an additively manufactured 2024 Al alloy
[J]. J. Mater. Sci. Technol., 2020, 58(0): 34-45.
|
[8] |
Jin Bai, Xiao Chen, Emilia Olsson, Huimin Wu, Shiquan Wang, Qiong Cai, Chuanqi Feng.
Synthesis of Bi2S3/carbon nanocomposites as anode materials for lithium-ion batteries
[J]. J. Mater. Sci. Technol., 2020, 50(0): 92-102.
|
[9] |
Qinglin Li, Shang Zhao, Xuepeng Bao, Yushi Zhang, Yuqian Zhu, Chuangzao Wang, Yefeng Lan, Yuxin Zhang, Tiandong Xia.
Effects of AlCoCrFeNiTi high-entropy alloy on microstructure and mechanical properties of pure aluminum
[J]. J. Mater. Sci. Technol., 2020, 52(0): 1-11.
|
[10] |
X.X. Zhang, J.F. Zhang, Z.Y. Liu, W.M. Gan, M. Hofmann, H. Andrä, B.L. Xiao, Z.Y. Ma.
Microscopic stresses in carbon nanotube reinforced aluminum matrix composites determined by in-situ neutron diffraction
[J]. J. Mater. Sci. Technol., 2020, 54(0): 58-68.
|
[11] |
Guanglong Li, Yingdong Qu, Yaohua Yang, Qiwen Zhou, Xishi Liu, Rongde Li.
Improved multi-orientation dispersion of short carbon fibers in aluminum matrix composites prepared with square crucible by mechanical stirring
[J]. J. Mater. Sci. Technol., 2020, 40(0): 81-87.
|
[12] |
Xingchen Xu, Daoxin Liu, Xiaohua Zhang, Chengsong Liu, Dan Liu.
Mechanical and corrosion fatigue behaviors of gradient structured 7B50-T7751 aluminum alloy processed via ultrasonic surface rolling
[J]. J. Mater. Sci. Technol., 2020, 40(0): 88-98.
|
[13] |
Shaoning Geng, Ping Jiang, Xinyu Shao, Lingyu Guo, Xuesong Gao.
Heat transfer and fluid flow and their effects on the solidification microstructure in full-penetration laser welding of aluminum sheet
[J]. J. Mater. Sci. Technol., 2020, 46(0): 50-63.
|
[14] |
C. Yang, J.F. Zhang, G.N. Ma, L.H. Wu, X.M. Zhang, G.Z. He, P. Xue, D.R. Ni, B.L. Xiao, K.S. Wang, Z.Y. Ma.
Microstructure and mechanical properties of double-side friction stir welded 6082Al ultra-thick plates
[J]. J. Mater. Sci. Technol., 2020, 41(0): 105-116.
|
[15] |
Qiang Lu, Kai Li, Haonan Chen, Mingjun Yang, Xinyue Lan, Tong Yang, Shuhong Liu, Min Song, Lingfei Cao, Yong Du.
Simultaneously enhanced strength and ductility of 6xxx Al alloys via manipulating meso-scale and nano-scale structures guided with phase equilibrium
[J]. J. Mater. Sci. Technol., 2020, 41(0): 139-148.
|