Energy of Grain Boundaries of Different Type in fcc Solid Solutions, Ordered Alloys and Intermetallics with L12 Superstructure

Abstract

Abstract: The study of the triple junctions of the grain boundaries in some fcc solid solutions, ordered alloys and intermetallics with L12 has been carried out using the optical metallography and TEM methods. Two-types of the triple junctions were found in the alloys investigated (1), consisting of the boundaries of the random (RT), and (2), consisting of the RT boundary and the special boundaries (ST). The relative values of the RT and ST boundary energy were determined on the basis of the measurements of the angles between the grain boundary planes. It has been shown that the energy of ST boundaries increases with the increase of the stacking fault (SF) energy. The energy of the RT boundaries does not depend on the SF energy.

Key words: Alloys, Grain boundary energy, Stacking fault, Anti-phase-boundary

O.B.Perevalova, E.V.Konovalova, N.A.Koneva, E.V.Kozlov. Energy of Grain Boundaries of Different Type in fcc Solid Solutions, Ordered Alloys and Intermetallics with L12 Superstructure[J]. J Mater Sci Technol, 2003, 19(06): 593-596.

References

[1] C.Harring: Physics of Powder Metallurgy, McGraw-Hill, N.Y.,1951, 143．
[2] D.McLean: Mechanical Properties of Metals, John Wiley &Sons, New York, London, 1965, 431．
[3] D.Wolf: Ada Metall., 1990, 38(5) , 781．
[4] D.Wolf: Ada Metall, 1990, 38(5) , 791．
[5] Ch.V.Kopetskii and L.K.Fionova: Poverkhnost: Fizika.Khimiya, Mekhanika, 1984, 2, 5． (in Russian)
[6] D.Wolf and K.L.Merkle: in Material Interphases, Atomic-levelStrudure and Properties, eds. D.Wolf and S.Yip, Chapman &Hall, London, 1992, 87．
[7] T.Takasugi: in Intermetallic Compounds. Principles and Practice, eds. I.H.Westbrook and R.L.Flisher, J. Wiley & Sons,N-Y., 1995, 585．
[8] D.Farkas and F.A.Cardozo: Intermetallics, 1998, 6, 257．
[9] Zhukova and L.K.Fionova: Fizika Tverdogo Tela, 1983, 25(3) ,826． (in Russian)
[10] O.B.Perevalova, E.V.Konovalova, N.A.Koneva andE.V.Kozlov: J. Mater. Sci. Technol., 2000, 16(6) , 585．
[11] O.B.Perevalova, E.V.Konovalova, A.P.Troyanov andN.A.Koneva: Physics, 2000, 11, 104． (in Russian)
[12] J.Cermak, J.Ruzickova and A.Pokorna: Intermetallics, 1998,6, 473．
[13] S.Crampin, D.D.Vvedensky and R.Monnier: Philos. Mag.,1993, 67A(6) , 1447．
[14] Th.Steffens, Ch.Schwink, A.Korner and H.P.Karnthaler: Philos. Mag., 1987, 56A(2) , 161．
[15] M.J.Marsinkovsky and D.S.Miller: Philos. Mag., 1961, 6, 871．
[16] L.E.Popov, N.A.Koneva and I.V.Tereshko: Strain Hardening ofOrdered Alloys, Metallurgiya, Moscow, 1979, 255． (in Russian)
[17] J.Shoeck: Philos. Mag. Lett., 1997, 75(1) , 7．
[18] Y.Q.Sun: Intermetallic Compounds, eds. I.H.Westbrook andR.L.Flisher, J. Wiley and Sons, N-Y., 1995, 495．
[19] O.B.Perevalova, N.A.Koneva and E.V.Kozlov: Phys., 1992, 7,3． (in Russian)
[20] O.B.Perevalova, N.A.Koneva and E.V.Kozlov: Phys., 1999, 11,34． (in Russian)
[21] G.Gindraux and W.Form: J. Inst. Metals, 1973, 101, 85．
[22] O.B.Perevalova, E.V.Konovalova, N.A.Koneva andE.V.Kozlov: Metallofizika. Noveishie Teknologii, 2000, 22(6) ,29． (in Russian)
[23] E.V.Konovalova, N.A.Koneva, O.B.Perevalova andE.V.Kozlov: Phizicheska Mezomekanika, 2000, 3(3) , 15． (inRussian)
[24] H.Jang, D.Farkas and J.T.M.De Hosson: J. Mater. Res., 1992,7(7) , 1707．
[25] T.Takasugi and O.Isumi: Ada Metall., 1983, 31, 1187．
[26] O.B.Perevalova: Plasticity Deformation of Alloys, TGU,Tomsk, 1986, 231． (in Russian)
[27] E.V.Konovalova, O.B.Perevalova, N.A.Koneva andE.V.Kozlov: Sovremennie Problemi Prochnosti, Novgorod,NGU, 1999, 2, 3． (in Russian)
[28] E.V.Konovalova, O.B.Perevalova, N.A.Koneva andE.V.Kozlov: Sovremennie problemi prochnosti, Novgorod,NGU, 1999, 2, 242． (in Russian)
[29] E.V.Konovalova, O.B.Perevalova, N.A.Koneva andE.V.Kozlov: MetalloSzika. Noveishie Teknologii, 2001, 23(5) ,655． (in Russian).
[30] O.B.Perevalova, E.V.Konovalova, N.A.Koneva andE.V.Kozlov: Nauchnie Trudi V Seminara "Sovremennie problemi prochnosti", Novgorod, 2001, 131． (in Russian)