Study on Non-interlayer Liquid Phase Diffusion Bonding for SiCp/ZL101 Aluminum Matrix Composite

J Mater Sci Technol ›› 2003, Vol. 19 ›› Issue (Supl.): 88-90.

• Research Articles • Previous Articles Next Articles

Study on Non-interlayer Liquid Phase Diffusion Bonding for SiCp/ZL101 Aluminum Matrix Composite

Wei GUO, Jitai NIU, Jinfan ZHAI, Changli WANG, Jie YU, Guangtao ZHOU

State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, China

Received:1900-01-01 Revised:1900-01-01 Online:2003-12-28 Published:2009-10-10
Contact: Jitai NIU

Abstract

Abstract: Through the vacuum diffusion bonding for SiCp/ZL101 aluminum matrix composite, the influence of bonding parameters on the joint properties was reported, with the aim to obtain optimal bonding parameters. The microstructure of joints was analyzed by means of optical microscope and scanning electron microscope in order to study the relationship between the macro-properties of joints and the microstructures. It was found that diffusion bonding could be used for bonding aluminum matrix composites successfully. Meanwhile, the properties of the matrix and the joint were all affected by some defects such as the reinforcement aggregation in aluminum matrix composites made by stirring casting.

Key words: Aluminum matrix composite, Diffusion bonding, SiCp/ZL101, Non-interlayer

Wei GUO, Jitai NIU, Jinfan ZHAI, Changli WANG, Jie YU, Guangtao ZHOU. Study on Non-interlayer Liquid Phase Diffusion Bonding for SiCp/ZL101 Aluminum Matrix Composite[J]. J Mater Sci Technol, 2003, 19(Supl.): 88-90.

[1]	S.D. Ji, Q. Wen, Z.W. Li. A novel friction stir diffusion bonding process using convex-vortex pin tools [J]. J. Mater. Sci. Technol., 2020, 48(0): 23-30.
[2]	Guanglong Li, Yingdong Qu, Yaohua Yang, Qiwen Zhou, Xishi Liu, Rongde Li. Improved multi-orientation dispersion of short carbon fibers in aluminum matrix composites prepared with square crucible by mechanical stirring [J]. J. Mater. Sci. Technol., 2020, 40(0): 81-87.
[3]	Peng Li, Shuai Wang, Yueqing Xia, Xiaohu Hao, Honggang Dong. Diffusion bonding of AlCoCrFeNi_2.1 eutectic high entropy alloy to TiAl alloy [J]. J. Mater. Sci. Technol., 2020, 45(0): 59-69.
[4]	X.X. Zhang, J.F. Zhang, Z.Y. Liu, W.M. Gan, M. Hofmann, H. Andrä, B.L. Xiao, Z.Y. Ma. Microscopic stresses in carbon nanotube reinforced aluminum matrix composites determined by in-situ neutron diffraction [J]. J. Mater. Sci. Technol., 2020, 54(0): 58-68.
[5]	Li Fuping,Li Jinshan,Kou Hongchao,Zhou Lian. Anisotropic Porous Ti6Al4V Alloys Fabricated by Diffusion Bonding: Adaption of Compressive Behavior to Cortical Bone Implant Applications [J]. J. Mater. Sci. Technol., 2016, 32(9): 937-943.
[6]	Chao Zhang, Hong Li, Miaoquan Li. Detailed Evolution Mechanism of Interfacial Void Morphology in Diffusion Bonding [J]. J. Mater. Sci. Technol., 2016, 32(3): 259-264.
[7]	Chen Haiyan, Cao Jian, Song Xiaoguo, Liu Jiakun, Feng Jicai. Characterization, Removal and Evaluation of Oxide Film in the Diffusion Bonding of Zr₅₅Cu₃₀Ni₅Al₁₀ Bulk Metallic Glass [J]. J. Mater. Sci. Technol., 2014, 30(7): 722-730.
[8]	Y.Q. Liu, S.H. Wei, J.Z. Fan, Z.L. Ma, T. Zuo. Mechanical Properties of a Low-thermal-expansion Aluminum/Silicon Composite Produced by Powder Metallurgy [J]. J. Mater. Sci. Technol., 2014, 30(4): 417-422.
[9]	Shaily M. Bhola, Sukumar Kundu, Rahul Bhola, Brajendra Mishra, Subrata Chatterjee. Electrochemical Study of Diffusion Bonded Joints between Micro-duplex Stainless Steel and Ti6Al4V Alloy [J]. J. Mater. Sci. Technol., 2014, 30(2): 163-171.
[10]	Peng Jin, Bolu Xiao, Quanzhao Wang, Zongyi Ma, Yue Liu, Shu Li. Efect of Hot Extrusion on Interfacial Microstructure and Tensile Properties of SiC_p/2009Al Composites Fabricated at Different Hot Pressing Temperatures [J]. J Mater Sci Technol, 2011, 27(6): 518-524.
[11]	H. Sabetghadam, A. Zarei Hanzaki, A. Araee, A. Hadian. Microstructural Evaluation of 410 SS/Cu Diffusion-Bonded Joint [J]. J Mater Sci Technol, 2010, 26(2): 163-169.
[12]	Jianying Zou,Yuyou Cui,Rui Yang. Diffusion Bonding of Dissimilar Intermetallic Alloys Based on Ti₂AlNb and TiAl [J]. J Mater Sci Technol, 2009, 25(06): 819-824.
[13]	Bulent Kurt,Mustafa Ulutan. Interfacial Microstructure of Diffusion Bonded Inconel 738 and Ferritic Stainless Steel Couple [J]. J Mater Sci Technol, 2009, 25(04): 527-530.
[14]	Wei GUO, Xihua ZHAO, Minxia SONG, Jicai FENG, Biao YANG. Diffusion Bonding of Ti-6Al-4V to QAl 10-3-1.5 with Ni/Cu Interlayers [J]. J Mater Sci Technol, 2006, 22(06): 817-820.
[15]	Min ZHAO, Gaohui WU, Zuoyong DOU, Longtao JIANG. Property Characteristics of a TiB2P/Al Composite Fabricatedby Squeeze Casting Technology [J]. J Mater Sci Technol, 2006, 22(01): 83-86.

Study on Non-interlayer Liquid Phase Diffusion Bonding for SiCp/ZL101 Aluminum Matrix Composite

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments