Simulation of Ultrasonic Propagation Based on Raying Model in Typical Structure

J Mater Sci Technol ›› 2003, Vol. 19 ›› Issue (Supl.): 125-128.

• Research Articles • Previous Articles Next Articles

Simulation of Ultrasonic Propagation Based on Raying Model in Typical Structure

Tie GANG, Weizhi ZHANG, Liwei GUO

State Key Lab. of AWPT, Harbin Institute of Technology, Harbin 150001, China

Received:1900-01-01 Revised:1900-01-01 Online:2003-12-28 Published:2009-10-10
Contact: Tie GANG

Abstract

Abstract: The convenient and useful raying mode was selected to develop the analysis module of ultrasonic parameters, and the simulation of ultrasonic propagation in typical plane structure was carried out. Using this model, the ultrasonic propagation in the water immersion testing was analyzed. For the complex plate structure, the intelligent analysis and simulation module was developed.

Key words: Ultrasonic testing, Ray modeling, Computer simulation

Tie GANG, Weizhi ZHANG, Liwei GUO. Simulation of Ultrasonic Propagation Based on Raying Model in Typical Structure[J]. J Mater Sci Technol, 2003, 19(Supl.): 125-128.

[1]	studyHui Xing, Anping Dong, Jian Huang, Jiao Zhang, Baode Sun. Revisiting intrinsic brittleness and deformation behavior of B2 NiAl intermetallic compound: A first-principles study [J]. J. Mater. Sci. Technol., 2018, 34(4): 620-626.
[2]	Itsuo Ohnaka, Akira Sugiyama, Takashi Ikeda, Hideyuki Yasuda. Mold Filling and Prevention of Gas Entrapment in High-pressure Die-casting [J]. J Mater Sci Technol, 2008, 24(01): 139-140.
[3]	Dongli SONG, Jianfeng GU, Jiansheng PAN, Xin YAO. Design of Quenching Process for Large-sized AISI P20 SteelBlock Used as Plastic Die [J]. J Mater Sci Technol, 2006, 22(01): 139-144.
[4]	Yunbo XU, Yongmei YU, Xianghua LIU, Guodong WANG. Computer Simulation of Ferrite Transformation during Hot Working of Low Carbon Steel [J]. J Mater Sci Technol, 2004, 20(05): 497-500.
[5]	Mufu YAN, Qingchang MENG, Jihong YAN. Mathematical Models and Computer Simulation of Nitrogen Concentration Profiles in Pulse Plasma Nitrided Layers [J]. J Mater Sci Technol, 2003, 19(Supl.): 164-166.
[6]	Zhufeng YUE. Computer Simulation of the Indentation Creep Tests on Particle-Reinforced Composites [J]. J Mater Sci Technol, 2002, 18(04): 335-340.
[7]	P.C.Clapp C.S.Becquart D.Kim Y.Shao J.A.Rifkin Center for Materials Simulation,Institute of Materials Science,University of Connecticut,Storrs,CT 06269-3136,USA. Atomistic Simulation of Phase Transformation and Fracture in Ordered Intermetallics [J]. J Mater Sci Technol, 1993, 9(5): 355-359.
[8]	Zhenyu LIU Wei WANG Guodong WANG Qiang ZHANG Northeast University of Technology,Shenyang,110006,ChinaDongqing MA Guoliang WU Jingshan LI Benxi Iron and Steel Company,Benxi,117000,China. Two-dimensional Model of the Microstructural Evolution in Hot-strip Rolling Processes of C-Mn Steels by Computer Simulations [J]. J Mater Sci Technol, 1993, 9(3): 215-218.

Simulation of Ultrasonic Propagation Based on Raying Model in Typical Structure

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 8

Recommended Articles

Metrics

Comments