Preparation of Nickel Materials with Fractal Structure

Abstract

Abstract: A way of manufacturing nickel material with fractal structure has been studied. Some algae with natural fractal structure were used as the basic substrates. The nickel was coated on the substrates by both electroless deposition and electrodeposition. After elimination of the foundational algae by erosion, dissolution etc, the pure nickel materials with fractal structure were obtained. At last, the specific surface area was analyzed by BET analyses and the fractal dimension of the nickel material was calculated by means of box-counting technique. The comparison of fractal dimension between Ni structure and natural algae was also given.

Key words: Fractal, Nickel, Algae, Box counting

Ruichun WANG, Jingdong GUO, Benlian ZHOU. Preparation of Nickel Materials with Fractal Structure[J]. J Mater Sci Technol, 2003, 19(03): 229-231.

[1]	Xiaoxiao Li, Meiqiong Ou, Min Wang, Long Zhang, Yingche Ma, Kui Liu. Effect of boron addition on the microstructure and mechanical properties of K4750 nickel-based superalloy [J]. J. Mater. Sci. Technol., 2021, 60(0): 177-185.
[2]	Hui Xiao, Manping Cheng, Lijun Song. Direct fabrication of single-crystal-like structure using quasi-continuous-wave laser additive manufacturing [J]. J. Mater. Sci. Technol., 2021, 60(0): 216-221.
[3]	Yanhua Zeng, Fenfen Yang, Zongning Chen, Enyu Guo, Minqiang Gao, Xuejian Wang, Huijun Kang, Tongmin Wang. Enhancing mechanical properties and corrosion resistance of nickel-aluminum bronze via hot rolling process [J]. J. Mater. Sci. Technol., 2021, 61(0): 186-196.
[4]	Tingmin Di, Liuyang Zhang, Bei Cheng, Jiaguo Yu, Jiajie Fan. CdS nanosheets decorated with Ni@graphene core-shell cocatalyst for superior photocatalytic H₂ production [J]. J. Mater. Sci. Technol., 2020, 56(0): 170-178.
[5]	Shan Jiang, Hao Shao, Genyang Cao, Han Li, Weilin Xu, Jingliang Li, Jian Fang, Xungai Wang. Waste cotton fabric derived porous carbon containing Fe₃O₄/NiS nanoparticles for electrocatalytic oxygen evolution [J]. J. Mater. Sci. Technol., 2020, 59(0): 92-99.
[6]	Bintao Wu, Zhijun Qiu, Zengxi Pan, Kristin Carpenter, Tong Wang, Donghong Ding, Stephen Van Duin, Huijun Li. Enhanced interface strength in steel-nickel bimetallic component fabricated using wire arc additive manufacturing with interweaving deposition strategy [J]. J. Mater. Sci. Technol., 2020, 52(0): 226-234.
[7]	Wanshun Xia, Xinbao Zhao, Liang Yue, Ze Zhang. A review of composition evolution in Ni-based single crystal superalloys [J]. J. Mater. Sci. Technol., 2020, 44(0): 76-95.
[8]	Guang-Jian Yuan, Xian-Cheng Zhang, Bo Chen, Shan-Tung Tu, Cheng-Cheng Zhang. Low-cycle fatigue life prediction of a polycrystalline nickel-base superalloy using crystal plasticity modelling approach [J]. J. Mater. Sci. Technol., 2020, 38(0): 28-38.
[9]	Hongyu Wu, Dong Zhang, Biaobiao Yang, Chao Chen, Yunping Li, Kechao Zhou, Liang Jiang, Ruiping Liu. Microstructural evolution and defect formation in a powder metallurgy nickel-based superalloy processed by selective laser melting [J]. J. Mater. Sci. Technol., 2020, 36(0): 7-17.
[10]	Xiaogang Li, Kejian Li, Shanlin Li, Yao Wu, Zhipeng Cai, Jiluan Pan. Microstructure and high temperature fracture toughness of NG-TIG welded Inconel 617B superalloy [J]. J. Mater. Sci. Technol., 2020, 39(0): 173-182.
[11]	Qiang Zhu, Chuanjie Wang, Kai Yang, Gang Chen, Heyong Qin, Peng Zhang. Plastic deformation behavior of a nickel-based superalloy on the mesoscopic scale [J]. J. Mater. Sci. Technol., 2020, 40(0): 146-157.
[12]	Tao Liu, Jiahao Liu, Liuyang Zhang, Bei Cheng, Jiaguo Yu. Construction of nickel cobalt sulfide nanosheet arrays on carbon cloth for performance-enhanced supercapacitor [J]. J. Mater. Sci. Technol., 2020, 47(0): 113-121.
[13]	K.S. Chin, S. Idapalapati, D.T. Ardi. Thermal stress relaxation in shot peened and laser peened nickel-based superalloy [J]. J. Mater. Sci. Technol., 2020, 59(0): 100-106.
[14]	Kun Yu, Xianwu Shi, Zhenguo Jiang, Chaowen Li, Shuangjian Chen, Wang Tao, Xingtai Zhou, Zhijun Li. Effects of solution treatment on grain coarsening and hardness of laser welds in UNS N10003 alloy contained different carbon content [J]. J. Mater. Sci. Technol., 2019, 35(8): 1719-1726.
[15]	Meiqiong Ou, Yingche Ma, Weiwei Xing, Xianchao Hao, Bo Chen, Leilei Ding, Kui Liu. Stress rupture properties and deformation mechanisms of K4750 alloy at the range of 650 °C to 800 °C [J]. J. Mater. Sci. Technol., 2019, 35(7): 1270-1277.

Preparation of Nickel Materials with Fractal Structure

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments