Distribution of SiCp in Al and Al-Cu Alloy Centrifugally Cast with Electromagnetic Stirring

J Mater Sci Technol ›› 2004, Vol. 20 ›› Issue (04): 448-450.

• Research Articles • Previous Articles Next Articles

Distribution of SiCp in Al and Al-Cu Alloy Centrifugally Cast with Electromagnetic Stirring

Weiqiang ZHANG, Haifang SHI, Huameng FU

Department of Materials Science and Engineering, Liaoning Technical University, 47 Zhonghua Road, Fuxin 123000, China

Received:1900-01-01 Revised:1900-01-01 Online:2004-07-28 Published:2009-10-10
Contact: Weiqiang ZHANG

Abstract

Abstract: The SiCp/(Al-Cu) alloy and pure Al matrix composites have been prepared by the centrifugal casting with electromagnetic stirring. There are two particle-depleted zones formed in the samples without electromagnetic stirring. Electromagnetic stirring may result in a homogeneous distribution of fine SiC particles in the Al-Cu alloy, whereas it has little effect on the segregation in pure Al matrix. The results also show that the particle segregation is influenced by particle size and the coarse particles are more readily segregated than the fine ones.

Key words: Centrifugal casting, Particle distribution, Electromagnetic stirring, Solidification

Weiqiang ZHANG, Haifang SHI, Huameng FU. Distribution of SiCp in Al and Al-Cu Alloy Centrifugally Cast with Electromagnetic Stirring[J]. J Mater Sci Technol, 2004, 20(04): 448-450.

[1]	Lei Luo, Liangshun Luo, Robert O. Ritchie, Yanqing Su, Binbin Wang, Liang Wang, Ruirun Chen, Jingjie Guo, Hengzhi Fu. Optimizing the microstructures and mechanical properties of Al-Cu-based alloys with large solidification intervals by coupling travelling magnetic fields with sequential solidification [J]. J. Mater. Sci. Technol., 2021, 61(0): 100-113.
[2]	Hui Xiao, Manping Cheng, Lijun Song. Direct fabrication of single-crystal-like structure using quasi-continuous-wave laser additive manufacturing [J]. J. Mater. Sci. Technol., 2021, 60(0): 216-221.
[3]	Zijuan Xu, Zhongtao Li, Yang Tong, Weidong Zhang, Zhenggang Wu. Microstructural and mechanical behavior of a CoCrFeNiCu₄ non-equiatomic high entropy alloy [J]. J. Mater. Sci. Technol., 2021, 60(0): 35-43.
[4]	Wonjoo Lee, Yuhyeong Jeong, Jae-Wook Lee, Howon Lee, Seong-hoon Kang, Young-Min Kim, Jonghun Yoon. Numerical simulation for dendrite growth in directional solidification using LBM-CA (cellular automata) coupled method [J]. J. Mater. Sci. Technol., 2020, 49(0): 15-24.
[5]	Huihui Yang, Guanyi Jing, Piao Gao, Zemin Wang, Xiangyou Li. Effects of circular beam oscillation technique on formability and solidification behaviour of selective laser melted Inconel 718: From single tracks to cuboid samples [J]. J. Mater. Sci. Technol., 2020, 51(0): 137-150.
[6]	Shaoning Geng, Ping Jiang, Xinyu Shao, Lingyu Guo, Xuesong Gao. Heat transfer and fluid flow and their effects on the solidification microstructure in full-penetration laser welding of aluminum sheet [J]. J. Mater. Sci. Technol., 2020, 46(0): 50-63.
[7]	Ze-Tian Liu, Bing-Yu Wang, Cheng Wang, Min Zha, Guo-Jun Liu, Zhi-Zheng Yang, Jin-Guo Wang, Jie-Hua Li, Hui-Yuan Wang. Microstructure and mechanical properties of Al-Mg-Si alloy fabricated by a short process based on sub-rapid solidification [J]. J. Mater. Sci. Technol., 2020, 41(0): 178-186.
[8]	Nersisyan Hayk H., Kwon Suk Cheol, Ri Vladislav E., Kim Wan Bae, Choi Woo Seok, Lee Jong Hyeon. Formation of spherical alloy microparticles in a porous salt medium [J]. J. Mater. Sci. Technol., 2020, 43(0): 189-196.
[9]	Huiting Zheng, Ruirun Chen, Gang Qin, Xinzhong Li, Yanqing Su, Hongsheng Ding, Jingjie Guo, Hengzhi Fu. Microstructure evolution, Cu segregation and tensile properties of CoCrFeNiCu high entropy alloy during directional solidification [J]. J. Mater. Sci. Technol., 2020, 38(0): 19-27.
[10]	Liu Weifeng, Cao Yanfei, Guo Yifeng, Sun Mingyue, Xu Bin, Li Dianzhong. Solidification microstructure of Cr4Mo4V steel forged in the semi-solid state [J]. J. Mater. Sci. Technol., 2020, 38(0): 170-182.
[11]	Hao Liu, Xuan Ge, Qiaodan Hu, Fan Yang, Jianguo Li. A new sight into the glass forming ability caused by doping on Ba- and Ti-site in BaTi₂O₅ glass [J]. J. Mater. Sci. Technol., 2020, 54(0): 112-118.
[12]	Jian-kun Ren, Yun Chen, Yan-fei Cao, Ming-yue Sun, Bin Xu, Dian-zhong Li. Modeling motion and growth of multiple dendrites during solidification based on vector-valued phase field and two-phase flow models [J]. J. Mater. Sci. Technol., 2020, 58(0): 171-187.
[13]	H. Dong, Y.Z. Chen, Z.R. Zhang, G.B. Shan, W.X. Zhang, F. Liu. Mechanisms of eutectic lamellar destabilization upon rapid solidification of an undercooled Ag-39.9 at.% Cu eutectic alloy [J]. J. Mater. Sci. Technol., 2020, 59(0): 173-179.
[14]	Yuanhao Dong, Sansan Shuai, Tianxiang Zheng, Jiawei Cao, Chaoyue Chen, Jiang Wang, Zhongming Ren. In-situ observation of solid-liquid interface transition during directional solidification of Al-Zn alloy via X-ray imaging [J]. J. Mater. Sci. Technol., 2020, 39(0): 113-123.
[15]	Xiaojun Sun, Jie He, Bin Chen, Lili Zhang, Hongxiang Jiang, Jiuzhou Zhao, Hongri Hao. Microstructure formation and electrical resistivity behavior of rapidly solidified Cu-Fe-Zr immiscible alloys [J]. J. Mater. Sci. Technol., 2020, 44(0): 201-208.

Distribution of SiCp in Al and Al-Cu Alloy Centrifugally Cast with Electromagnetic Stirring

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments