Plasma Spray Forming of Nanostructured Composite Coatings

J Mater Sci Technol ›› 2002, Vol. 18 ›› Issue (03): 287-288.

• Research Articles • Previous Articles

Plasma Spray Forming of Nanostructured Composite Coatings

Xianliang JIANG, Eric H.Jordan, Leon Shaw, Maurice Gell

Institute of Surface and Coatings Technology, Central South University, Changsha 410083, China...

Received:1900-01-01 Revised:1900-01-01 Online:2002-05-28 Published:2009-10-10
Contact: Xianliang JIANG

Abstract

Abstract: The nanostructure composite coating is obtained via plasma spraying of Al2O3-13 wt pct TiO2 powder. Brittle and hard lamella results from melted nanostructured powder. Ductile nanostructured matrix forms from unmelted nanostructured particles. Through the adjustment of constituent and nanostructure, hardness/strength and toughness/ductility are balanced and overall properties of the structure composite are achieved.

Key words: Plasma spray forming, Nanostructured coating, Mechanical Property

Xianliang JIANG, Eric H.Jordan, Leon Shaw, Maurice Gell. Plasma Spray Forming of Nanostructured Composite Coatings[J]. J Mater Sci Technol, 2002, 18(03): 287-288.

[1]	H. Niu, H.C. Jiang, M.J. Zhao, L.J. Rong. Effect of interlayer addition on microstructure and mechanical properties of NiTi/stainless steel joint by electron beam welding [J]. J. Mater. Sci. Technol., 2021, 61(0): 16-24.
[2]	Zhiqiang Zhang, Changshu He, Ying Li, Lei Yu, Su Zhao, Xiang Zhao. Effects of ultrasonic assisted friction stir welding on flow behavior, microstructure and mechanical properties of 7N01-T4 aluminum alloy joints [J]. J. Mater. Sci. Technol., 2020, 43(0): 1-13.
[3]	Jialin Wu, Li Jin, Jie Dong, Fenghua Wang, Shuai Dong. The texture and its optimization in magnesium alloy [J]. J. Mater. Sci. Technol., 2020, 42(0): 175-189.
[4]	Lin Chen, Mingyu Hu, Jun Guo, Xiaoyu Chong, Jing Feng. Mechanical and thermal properties of RETaO₄ (RE = Yb, Lu, Sc) ceramics with monoclinic-prime phase [J]. J. Mater. Sci. Technol., 2020, 52(0): 20-28.
[5]	B.W. Dong, S.H. Wang, Z.Z. Dong, J.C. Jie, T.M. Wang, T.J. Li. Novel insight into dry sliding behavior of Cu-Pb-Sn in-situ composite with secondary phase in different morphology [J]. J. Mater. Sci. Technol., 2020, 40(0): 158-167.
[6]	Yujuan Li, Yingkang Wei, Xiaotao Luo, Changjiu Li, Ninshu Ma. Correlating particle impact condition with microstructure and properties of the cold-sprayed metallic deposits [J]. J. Mater. Sci. Technol., 2020, 40(0): 185-195.
[7]	Langlang Zhao, Shitong Wei, Dong Wu, Dianbao Gao, Shanping Lu. δ-ferrite transformation mechanism and its effect on mechanical properties of 316H weld metal [J]. J. Mater. Sci. Technol., 2020, 57(0): 33-42.
[8]	S.M. Liang, H.M. Ji, X.W. Li. Thickness-dependent mechanical properties of nacre in Cristaria plicata shell: Critical role of interfaces [J]. J. Mater. Sci. Technol., 2020, 44(0): 1-8.
[9]	Ji Zou, Guo-Jun Zhang, Zheng-Yi Fu. In-situ ZrB₂- hBN ceramics with high strength and low elasticity [J]. J. Mater. Sci. Technol., 2020, 48(0): 186-193.
[10]	Wanpeng Hu, Yiming Lei, Jie Zhang, Jingyang Wang. Mechanical and thermal properties of RE₄Hf₃O₁₂ (RE=Ho, Er, Tm) ceramics with defect fluorite structure [J]. J. Mater. Sci. Technol., 2019, 35(9): 2064-2069.
[11]	Decheng Kong, Chaofang Dong, Xiaoqing Ni, Liang Zhang, Jizheng Yao, Cheng Man, Xuequn Cheng, Kui Xiao, Xiaogang Li. Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes [J]. J. Mater. Sci. Technol., 2019, 35(7): 1499-1507.
[12]	Beibei Jiang, Donghui Wen, Qing Wang, Jinda Che, Chuang Dong, Peter K. Liaw, Fen Xu, Lixian Sun. Design of near-α Ti alloys via a cluster formula approach and their high-temperature oxidation resistance [J]. J. Mater. Sci. Technol., 2019, 35(6): 1008-1016.
[13]	Qian Zhao, Zongqing Ma, Liming Yu, Huijun Li, Chenxi Liu, Chong Li, Yongchang Liu. Tailoring the secondary phases and mechanical properties of ODS steel by heat treatment [J]. J. Mater. Sci. Technol., 2019, 35(6): 1064-1073.
[14]	Cong Liu, Wenyi Peng, C.S. Jiang, Hongmin Guo, Jun Tao, Xiaohua Deng, Zhaoxia Chen. Composition and phase structure dependence of mechanical and magnetic properties for AlCoCuFeNi_x high entropy alloys [J]. J. Mater. Sci. Technol., 2019, 35(6): 1175-1183.
[15]	Q. Chu, W.Y. Li, H.L. Hou, X.W. Yang, A. Vairis, C. Wang, W.B. Wang. On the double-side probeless friction stir spot welding of AA2198 Al-Li alloy [J]. J. Mater. Sci. Technol., 2019, 35(5): 784-789.

Plasma Spray Forming of Nanostructured Composite Coatings

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments