[1] |
Xiaoxiao Li, Meiqiong Ou, Min Wang, Long Zhang, Yingche Ma, Kui Liu.
Effect of boron addition on the microstructure and mechanical properties of K4750 nickel-based superalloy
[J]. J. Mater. Sci. Technol., 2021, 60(0): 177-185.
|
[2] |
Yanhua Zeng, Fenfen Yang, Zongning Chen, Enyu Guo, Minqiang Gao, Xuejian Wang, Huijun Kang, Tongmin Wang.
Enhancing mechanical properties and corrosion resistance of nickel-aluminum bronze via hot rolling process
[J]. J. Mater. Sci. Technol., 2021, 61(0): 186-196.
|
[3] |
Hui Xiao, Manping Cheng, Lijun Song.
Direct fabrication of single-crystal-like structure using quasi-continuous-wave laser additive manufacturing
[J]. J. Mater. Sci. Technol., 2021, 60(0): 216-221.
|
[4] |
Kaiming Cheng, Jiaxing Sun, Huixia Xu, Jin Wang, Chengwei Zhan, Reza Ghomashchi, Jixue Zhou, Shouqiu Tang, Lijun Zhang, Yong Du.
Diffusion growth of ϕ ternary intermetallic compound in the Mg-Al-Zn alloy system: In-situ observation and modeling
[J]. J. Mater. Sci. Technol., 2021, 60(0): 222-229.
|
[5] |
Qiang Ren, Yuexin Zhang, Ying Ren, Lifeng Zhang, Jujin Wang, Yadong Wang.
Prediction of spatial distribution of the composition of inclusions on the entire cross section of a linepipe steel continuous casting slab
[J]. J. Mater. Sci. Technol., 2021, 61(0): 147-158.
|
[6] |
Peng Li, Shuai Wang, Yueqing Xia, Xiaohu Hao, Honggang Dong.
Diffusion bonding of AlCoCrFeNi2.1 eutectic high entropy alloy to TiAl alloy
[J]. J. Mater. Sci. Technol., 2020, 45(0): 59-69.
|
[7] |
S.D. Ji, Q. Wen, Z.W. Li.
A novel friction stir diffusion bonding process using convex-vortex pin tools
[J]. J. Mater. Sci. Technol., 2020, 48(0): 23-30.
|
[8] |
Zhaohui Shan, Jing Bai, Jianfeng Fan, Hongfei Wu, Hua Zhang, Qiang Zhang, Yucheng Wu, Weiguo Li, Hongbiao Dong, Bingshe Xu.
Exceptional mechanical properties of AZ31 alloy wire by combination of cold drawing and EPT
[J]. J. Mater. Sci. Technol., 2020, 51(0): 111-118.
|
[9] |
H. Chen, A. Rushworth.
Effects of oxide stringers on the β-phase depletion behaviour in thermally sprayed CoNiCrAlY coatings during isothermal oxidation
[J]. J. Mater. Sci. Technol., 2020, 45(0): 108-116.
|
[10] |
Yueni Mei, Yuyu Li, Fuyun Li, Yaqian Li, Yingjun Jiang, Xiwei Lan, Songtao Guo, Xianluo Hu.
Lithium-ion insertion kinetics of Na-doped Li2TiSiO5 as anode materials for lithium-ion batteries
[J]. J. Mater. Sci. Technol., 2020, 57(0): 18-25.
|
[11] |
Haoqiang Zhang, Lin Liu, Zhiliang Pei, Nanlin Shi, Jun Gong, Chao Sun.
An effective strategy towards construction of CVD SiC fiber-reinforced superalloy matrix composite
[J]. J. Mater. Sci. Technol., 2020, 49(0): 179-185.
|
[12] |
Tao Liu, Jiahao Liu, Liuyang Zhang, Bei Cheng, Jiaguo Yu.
Construction of nickel cobalt sulfide nanosheet arrays on carbon cloth for performance-enhanced supercapacitor
[J]. J. Mater. Sci. Technol., 2020, 47(0): 113-121.
|
[13] |
Guang-Jian Yuan, Xian-Cheng Zhang, Bo Chen, Shan-Tung Tu, Cheng-Cheng Zhang.
Low-cycle fatigue life prediction of a polycrystalline nickel-base superalloy using crystal plasticity modelling approach
[J]. J. Mater. Sci. Technol., 2020, 38(0): 28-38.
|
[14] |
Honglei Hu, Mingjiu Zhao, Lijian Rong.
Retarding the precipitation of η phase in Fe-Ni based alloy through grain boundary engineering
[J]. J. Mater. Sci. Technol., 2020, 47(0): 152-161.
|
[15] |
H.X. Zeng, Z.W. Liu, J.S. Zhang, X.F. Liao, H.Y. Yu.
Towards the diffusion source cost reduction for NdFeB grain boundary diffusion process
[J]. J. Mater. Sci. Technol., 2020, 36(0): 50-54.
|