J. Mater. Sci. Technol. ›› 2021, Vol. 61: 125-131.DOI: 10.1016/j.jmst.2020.06.013

• Research Article • Previous Articles     Next Articles

Doped ceramics of indium oxides for negative permittivity materials in MHz-kHz frequency regions

Guohua Fana, Zhongyang Wanga, Kai Sunb, Yao Liua,*(), Runhua Fanb   

  1. aKey Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan 250061, China
    bCollege of Ocean Science and Engineering, Shanghai Maritime University, Shanghai 201306, China
  • Received:2020-04-27 Revised:2020-05-25 Accepted:2020-06-06 Published:2021-01-20 Online:2021-01-20
  • Contact: Yao Liu

Abstract:

Negative permittivity has been widely studied in various metamaterials and percolating composites, of which the anomalous dielectric behavior was attributed to critical structural properties of building blocks. Herein, mono-phase ceramics of indium tin oxides (ITO) were sintered for epsilon-negative materials in MHz-kHz frequency regions. Electrical conductivity and complex permittivity were analyzed with Drude-Lorentz oscillator model. Carriers’ characters were measured based on Hall effect and the magnitude and frequency dispersion of negative permittivity were mainly determined by carrier concentration. Temperature-dependent dielectric properties further proved the epsilon-negative behaviors were closely associated with free carriers’ collective responses. It’s found that negative permittivity of ITO ceramics was mainly caused by plasma oscillations of free carriers, while the dielectric loss was mainly attributed to conduction loss. Negative permittivity realized here was related to materials intrinsic nature and this work preliminarily determined the mechanism of negative permittivity in doped ceramics from the perspective of carriers.

Key words: Tin-doped indium oxides, Negative permittivity, n-type carriers, Plasma oscillation