J Mater Sci Technol ›› 2005, Vol. 21 ›› Issue (02): 251-255.

• Research Articles • Previous Articles     Next Articles

Microstructure and Properties of Low Temperature Composite Chromized Layer on H13 Tool Steel

Cuilan WU, Chengping LUO, Ganfeng ZOU   

  1. College of Mechanical Engineering, South China University of Technology, Guangzhou 510641, China
  • Received:2004-06-07 Revised:2004-08-31 Online:2005-03-28 Published:2009-10-10
  • Contact: Cuilan WU

Abstract: Low temperature composite chromizing is a process composed of a plain ion-carbonitriding or ion-nitriding at 550~580℃, followed by a low-temperature chromizing in a salt-bath of 590℃. The microstructure and properties of the low temperature composite chromized layer on H13 tool steel were investigated using metallography, X-ray diffraction, microanalysis, hardness and wear tests. It was found that this low temperature process was thermodynamically and kinetically possible, and the composite chromized layer on H13 steel, with a thickness of 3~6 μm, consisted of three sub-layers (bands), viz. the outer Cr-rich one, the intermediate (black) one, and the inner, original white layer. After chromizing, the former diffusion layer was thickened. The results of X-ray diffraction showed that the composite chromized layer contained such nitrides and carbides of chromium as CrN, Cr2N, (Cr, Fe)23C6, and (Cr, Fe)7C3, as well as plain α-(Fe, Cr). A high surface microhardness of 1450~1550 HV0.025, which is much higher than that obtained by the conventional ion carbonitriding and ion nitriding, was obtained. In addition, an excellent wear resistance was gained on the composite chromized layer.

Key words: H13 tool steel, Low temperature composite chromizing, Nitride and carbide of chromium...