[1] |
Fan Jiangkun, Zhang Zhixin, Gao Puyi, Yang Ruimeng, Li Huan, Tang Bin, Kou Hongchao, Zhang Yudong, Esling Claude, Li Jinshan.
On the nature of a peculiar initial yield behavior in metastable β titanium alloy Ti-5Al-5Mo-5V-3Cr-0.5Fe with different initial microstructures
[J]. J. Mater. Sci. Technol., 2020, 38(0): 135-147.
|
[2] |
Yingzhi Chen, Dongjian Jiang, Zhengqi Gong, Qinglin Li, Ranran Shi, Zexi Yang, Ziyi Lei, Jingyuan Li, Lu-Ning Wang.
Visible-light responsive organic nano-heterostructured photocatalysts for environmental remediation and H2 generation
[J]. J. Mater. Sci. Technol., 2020, 38(0): 93-106.
|
[3] |
Lucas-Granados Bianca, Sánchez-Tovar Rita, M. Fernández-Domene Ramón, María Estívalis-Martínez José, García-Antón José.
How does anodization time affect morphological and photocatalytic properties of iron oxide nanostructures?
[J]. J. Mater. Sci. Technol., 2020, 38(0): 159-169.
|
[4] |
Y.Z. Zhang, J.J. Wang, N.R. Tao.
Tensile ductility and deformation mechanisms of a nanotwinned 316L austenitic stainless steel
[J]. J. Mater. Sci. Technol., 2020, 36(0): 65-69.
|
[5] |
Mohammad Nasim, Yuncang Li, Ming Wen, Cuie Wen.
A review of high-strength nanolaminates and evaluation of their properties
[J]. J. Mater. Sci. Technol., 2020, 50(0): 215-244.
|
[6] |
Bingqiang Wei, Song Ni, Yong Liu, Xiaozhou Liao, Min Song.
Phase transformation and structural evolution in a Ti-5at.% Al alloy induced by cold-rolling
[J]. J. Mater. Sci. Technol., 2020, 49(0): 211-223.
|
[7] |
H.T. Jeong, W.J. Kim.
Grain size and temperature effect on the tensile behavior and deformation mechanisms of non-equiatomic Fe41Mn25Ni24Co8Cr2 high entropy alloy
[J]. J. Mater. Sci. Technol., 2020, 42(0): 190-202.
|
[8] |
Kaustubh Bawane, Kathy Lu.
Microstructure evolution of nanostructured ferritic alloy with and without Cr3C2 coated SiC at high temperatures
[J]. J. Mater. Sci. Technol., 2020, 43(0): 126-134.
|
[9] |
Jieqiong Wang, Zheng Liu, Changhong Zhan, Kexi Zhang, Xiaoyong Lai, Jinchun Tu, Yang Cao.
3D hierarchical NiS2/MoS2 nanostructures on CFP with enhanced electrocatalytic activity for hydrogen evolution reaction
[J]. J. Mater. Sci. Technol., 2020, 39(0): 155-160.
|
[10] |
P.A. Morton, H.C. Taylor, L.E. Murr, O.G. Delgado, C.A. Terrazas, R.B. Wicker.
In situ selective laser gas nitriding for composite TiN/Ti-6Al-4V fabrication via laser powder bed fusion
[J]. J. Mater. Sci. Technol., 2020, 45(0): 98-107.
|
[11] |
Liu Liu, Jie Meng, Jinlai Liu, Mingke Zou, Haifeng Zhang, Xudong Sun, Yizhou Zhou.
Influences of Re on low-cycle fatigue behaviors of single crystal superalloys at intermediate temperature
[J]. J. Mater. Sci. Technol., 2019, 35(9): 1917-1924.
|
[12] |
Chengsong Liu, Daoxin Liu, Xiaohua Zhang, Dan Liu, Amin Ma, Ni Ao, Xingchen Xu.
Improving fatigue performance of Ti-6Al-4V alloy via ultrasonic surface rolling process
[J]. J. Mater. Sci. Technol., 2019, 35(8): 1555-1562.
|
[13] |
Jianfeng Wang, Hongbo Zhou, Liguo Wang, Shijie Zhu, Shaokang Guan.
Microstructure, mechanical properties and deformation mechanisms of an as-cast Mg-Zn-Y-Nd-Zr alloy for stent applications
[J]. J. Mater. Sci. Technol., 2019, 35(7): 1211-1217.
|
[14] |
Meiqiong Ou, Yingche Ma, Weiwei Xing, Xianchao Hao, Bo Chen, Leilei Ding, Kui Liu.
Stress rupture properties and deformation mechanisms of K4750 alloy at the range of 650 °C to 800 °C
[J]. J. Mater. Sci. Technol., 2019, 35(7): 1270-1277.
|
[15] |
Xiaoying Shi, Yangxin Li, Xiaoqin Zeng, Yong Liu, Bin Chen, Jian Lu, Dejiang Li.
Deformation mechanism and dynamic precipitation in a Mg-7Al-2Sn alloy processed by surface mechanical attrition treatment
[J]. J. Mater. Sci. Technol., 2019, 35(7): 1473-1478.
|