Research on Deformation, Texture and Properties of IF Steel in Multiple Rolling Technology

J Mater Sci Technol ›› 2003, Vol. 19 ›› Issue (02): 183-184.

• Research Articles • Previous Articles Next Articles

Research on Deformation, Texture and Properties of IF Steel in Multiple Rolling Technology

Jinxia LI, Xianghua LIU, Guodong WANG

State Key Lab. of Rolling and Automation, Northeastern University, Shenyang 110004, China

Received:1900-01-01 Revised:1900-01-01 Online:2003-03-28 Published:2009-10-10
Contact: Jinxia LI

Abstract

Abstract: The relationships among the deformation, texture and deep drawing properties of IF steel were investigated. By adopting double cold rolling (DCR) technology, the deep drawing property has been developed evidently. With the aid of orientation distribution function (ODF) analysis, it was found that the main reason for good property is the counterbalance in intensity of the ideal texture component {111}<011> and {111}<112>.

Key words: Texture, Double cold rolling, r-value, Deformation

Jinxia LI, Xianghua LIU, Guodong WANG. Research on Deformation, Texture and Properties of IF Steel in Multiple Rolling Technology[J]. J Mater Sci Technol, 2003, 19(02): 183-184.

[1]	Qiyu Liao, Yanchao Jiang, Qichi Le, Xingrui Chen, Chunlong Cheng, Ke Hu, Dandan Li. Hot deformation behavior and processing map development of AZ110 alloy with and without addition of La-rich Mish Metal [J]. J. Mater. Sci. Technol., 2021, 61(0): 1-15.
[2]	Hui Jiang, Dongxu Qiao, Wenna Jiao, Kaiming Han, Yiping Lu, Peter K. Liaw. Tensile deformation behavior and mechanical properties of a bulk cast Al_0.9CoFeNi₂ eutectic high-entropy alloy [J]. J. Mater. Sci. Technol., 2021, 61(0): 119-124.
[3]	Hui Xiao, Manping Cheng, Lijun Song. Direct fabrication of single-crystal-like structure using quasi-continuous-wave laser additive manufacturing [J]. J. Mater. Sci. Technol., 2021, 60(0): 216-221.
[4]	B.N. Du, Z.Y. Hu, L.Y. Sheng, D.K. Xu, Y.X. Qiao, B.J. Wang, J. Wang, Y.F. Zheng, T.F. Xi. Microstructural characteristics and mechanical properties of the hot extruded Mg-Zn-Y-Nd alloys [J]. J. Mater. Sci. Technol., 2021, 60(0): 44-55.
[5]	Yi Zhang, Lili Tan, Qingchuan Wang, Ming Gao, Iniobong P. Etim, Ke Yang. Effects of microstructure on the torsional properties of biodegradable WE43 Mg alloy [J]. J. Mater. Sci. Technol., 2020, 51(0): 102-110.
[6]	Mohammad Nasim, Yuncang Li, Ming Wen, Cuie Wen. A review of high-strength nanolaminates and evaluation of their properties [J]. J. Mater. Sci. Technol., 2020, 50(0): 215-244.
[7]	Chaoyu Han, Shibo Wen, Feng Ye, Wenjia Wu, Shaowei Xue, Yongfeng Liang, Binbin Liu, Junpin Lin. Deformation twinning in equiaxed-grained Fe-6.5 wt.%Si alloy after rotary swaging [J]. J. Mater. Sci. Technol., 2020, 49(0): 25-34.
[8]	Bingqiang Wei, Song Ni, Yong Liu, Xiaozhou Liao, Min Song. Phase transformation and structural evolution in a Ti-5at.% Al alloy induced by cold-rolling [J]. J. Mater. Sci. Technol., 2020, 49(0): 211-223.
[9]	Qiang Zhu, Gang Chen, Chuanjie Wang, Lukuan Cheng, Heyong Qin, Peng Zhang. Microstructure evolution and mechanical property characterization of a nickel-based superalloy at the mesoscopic scale [J]. J. Mater. Sci. Technol., 2020, 47(0): 177-189.
[10]	Weijie Ren, Dejia Liu, Qing Liu, Renlong Xin. Influence of texture distribution in magnesium welds on their non-uniform mechanical behavior: A CPFEM study [J]. J. Mater. Sci. Technol., 2020, 46(0): 168-176.
[11]	Risheng Pei, Sandra Korte-Kerzel, Talal Al-Samman. Normal and abnormal grain growth in magnesium: Experimental observations and simulations [J]. J. Mater. Sci. Technol., 2020, 50(0): 257-270.
[12]	Hongwang Zhang, Yiming Zhao, Yuhui Wang, Chunling Zhang, Yan Peng. On the microstructural evolution pattern toward nano-scale of an AISI 304 stainless steel during high strain rate surface deformation [J]. J. Mater. Sci. Technol., 2020, 44(0): 148-159.
[13]	Shifeng Lin, Zhengwang Zhu, Shaofan Ge, Long Zhang, Dingming Liu, Yanxin Zhuang, Huameng Fu, Hong Li, Aimin Wang, Haifeng Zhang. Designing new work-hardenable ductile Ti-based multilayered bulk metallic glass composites with ex-situ and in-situ hybrid strategy [J]. J. Mater. Sci. Technol., 2020, 50(0): 128-138.
[14]	Jing Fan, Wei Rao, Junwei Qiao, P.K. Liaw, Daniel Şopu, Daniel Kiener, Jürgen Eckert, Guozheng Kang, Yucheng Wu. Achieving work hardening by forming boundaries on the nanoscale in a Ti-based metallic glass matrix composite [J]. J. Mater. Sci. Technol., 2020, 50(0): 192-203.
[15]	Changjian Yan, Yunchang Xin, Ce Wang, Huan Liu, Qing Liu. Microstructure and texture evolution of the β-Mg₁₇A₁₂ phase in a Mg alloy with an ultra-high Al content [J]. J. Mater. Sci. Technol., 2020, 52(0): 89-99.

Research on Deformation, Texture and Properties of IF Steel in Multiple Rolling Technology

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments