Microstructure and mechanical properties of FexCoCrNiMn high-entropy alloys

doi:10.1016/j.jmst.2019.05.050

材料科学与技术 ›› 2019, Vol. 35 ›› Issue (10): 2331-2335.DOI: 10.1016/j.jmst.2019.05.050

所属专题： High Entropy Alloys 2018-2020

收稿日期:2019-03-22 修回日期:2019-04-28 接受日期:2019-05-31 出版日期:2019-10-05 发布日期:2019-08-28

Microstructure and mechanical properties of Fe_xCoCrNiMn high-entropy alloys

Tao Zhang^a, Lijun Xin^a, Fufa Wu^a^*(), Rongda Zhao^a, Jun Xiang^a, Minghua Chen^a, Songshan Jiang^b, Yongjiang Huang^b^*(), Shunhua Chen^c

^aSchool of Materials Science and Engineering, Liaoning University of Technology, Jinzhou, 121001, China
^bSchool of Materials Science and Engineering, Harbin Institute of Technology, Harbin, 150001, China
^cSchool of Mechanical Engineering, Hefei University of Technology, Hefei, 230009, China

Received:2019-03-22 Revised:2019-04-28 Accepted:2019-05-31 Online:2019-10-05 Published:2019-08-28
Contact: Wu Fufa,Huang Yongjiang

摘要/Abstract

Abstract:

The microstructure and tensile properties of Fe_xCoCrNiMn high-entropy alloys (HEAs) were investigated. It was found that the Fe_xCoCrNiMn HEA has a single face-centered cubic (fcc) structure in a wide range of Fe content. Further increasing the Fe content endowed the Fe_xCoCrNiMn alloys with an fcc/body-centered cubic (bcc) dual-phase structure. The yield strength of the Fe_xCoCrNiMn HEAs slightly decreased with the increase of Fe content. An excellent combination of strength and ductility was achieved in the Fe_xCoCrNiMn HEA with higher Fe content, which can be attributed to the outstanding deformation coordination capability of the fcc/bcc dual phase structure.

Key words: High-entropy alloys, Microstructure, Mechanical properties, Strength, Ductility

. [J]. 材料科学与技术, 2019, 35(10): 2331-2335.

Tao Zhang, Lijun Xin, Fufa Wu, Rongda Zhao, Jun Xiang, Minghua Chen, Songshan Jiang, Yongjiang Huang, Shunhua Chen. Microstructure and mechanical properties of Fe_xCoCrNiMn high-entropy alloys[J]. J. Mater. Sci. Technol., 2019, 35(10): 2331-2335.

图/表 4

Fig. 1. EBSD images showing the microstructure of the FexCoCrNiMn alloys: (a) F20, (b) F40, and (c) F67, with insets showing the corresponding OM images, (d) EBSD image showing the phase composition of the F67 alloy, (e) SEM image of the F67 alloy showing the dendrite structure (Points A and B denote the dendrite and matrix, respectively) and (f) EDS results of the F67 alloy showing the chemical composition difference between the dendrite and the matrix along the dotted line in Fig. 1(e).

Fig. 2. XRD patterns of the FexCoCrNiMn alloys, with inset showing the main diffraction peaks of the fcc and bcc phases.

Fig. 3. Tensile properties of the FexCoCrNiMn alloys: (a) nominal tensile stress-strain curves; (b) statistics of the ultimate tensile strength and the ductility of the alloys with the Fe content; (c) true stress-strain curves; (d) strain-hardening rate with respect to the true strains.

Fig. 4. Strength-ductility relationship of some classes of metallic materials, including HEAs.

参考文献

[1]	B. Cantor, I.T.H. Chang, P. Knight, A.J.B. Vincent, Mater. Sci. Eng. A 375 (2004)213-218.
[2]	F. Otto, A.D. Dlouh′y, C. Somsen, H. Bei, G. Eggeler, E.P. George, Acta Mater. 61(2013) 5743-5755.
[3]	Y.J. Zhou, Y. Zhang, Y.L. Wang, G.L. Chen,Appl. Phys. Lett. 90(2007), 181904.
[4]	B. Gludovatz, A. Hohenwarter, D. Catoor, E.H. Chang, E.P. George, R.O. Ritchie,Science 345 (2014) 1153-1158.
[5]	O.N. Senkov, J.D. Miller, D.B. Miracle, C. Woodward, Nat. Commun. 6(2015)6529.
[6]	Y. Zhang, T.T. Zhu, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw, Z.P. Lu, Prog.Mater. Sci. 61(2014) 1-93.
[7]	L.R. Owen, E.J. Pickering, H.Y. Playford, H.J. Stone, M.G. Tucker, Acta Mater. 122(2017) 11-18.
[8]	J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, C.S. Y, Adv.Eng. Mater. 6(2004) 299-303.
[9]	J.W. Yeh, S.K. Chen, J.Y. Gan, S.J. Lin, T.S. Chin, T.T. Shun, C.H. Tsau, S.Y. Chang,Metall. Mater. Trans. A 35 (2004) 2533-2536.
[10]	J.W. Yeh, JOM 65 (2013) 1759-1771.
[11]	J.W. Yeh, S.Y. Chang, Y.D. Hong, S.K. Chen, Mater. Chem. Phys. 103(2007)41-46.
[12]	J. Li, Q.H. Fang, B. Liu, Y. Liu, Acta Mater. 147(2018) 35-41.
[13]	O.N. Senkov, G.B. Wilks, D.B. Miracle, C.P. Chuang, P.K. Liaw, Intermetallics 18(2010) 1758-1765.
[14]	J.Y. He, C. Zhu, D.Q. Zhou, W.H. Liu, T.G. Nieh, Z.P. Lu, Intermetallics 55 (2014)9-14.
[15]	J.Y. He, W.H. Liu, H. Wang, Y. Wu, X.J. Liu, T.G. Nieh, Z.P. Lu, Acta Mater. 62(2014) 105-113.
[16]	W.R. Wang, W.L. Wang, S.C. Wang, Y.C. Tsai, C.H. Lai, J.W. Yeh, Intermetallics 26(2012) 44-51.
[17]	X.Z. Gao, Y.P. Lu, B. Zhang, N.N. Liang, G.Z. Wu, G. Sha, J.Z. Liu, Acta Mater. 141(2017) 59-66.
[18]	Y.P. Lu, Y. Dong, S. Guo, L. Jiang, H.J. Kang, T.M. Wang, B. Wen, Z.J. Wang, J. C.Jie, Z.Q. Cao, H.H. Ruan, T.J. Li, Sci. Rep. 4(2014) 6200.
[19]	Z. Li, F. K?rmann, B. Grabowski, J. Neugebauer, D. Raabe, Acta Mater. 136(2017) 262-270.
[20]	Z. Li, C.C. Tasan, H. Springer, B. Gault, D. Raabe, Sci. Rep. 7(2017) 40704.
[21]	Z. Li, K.G. Pradeep, Y. Deng, D. Raabe, C.C. Tasan, Nature 534 (2016) 227-230.
[22]	L. Jiang, Y.P. Lu, W. Wu, Z.Q. Cao, T.J. Li, J. Mater. Sci. Technol. 32(2016)245-250.
[23]	Y.P. Lu, X.Z. Gao, L. Jiang, Z.N. Chen, T.M. Wang, J.C. Jie, H.J. Kang, Y.B. Zhang, S. Guo, H.H. Ruan, Y.H. Zhao, Z.Q. Cao, T.J. Li, Acta Mater. 124(2017) 143-150.
[24]	Y.J. Liang, L.J. Wang, B.Y. Cheng, Q.L. Wu, T.Q. Cao, Q. Xiao, Y.F. Xue, G. Sha, Y. D.Wang, Y. Ren, X.Y. Li, L. Wang, F.C. Wang, H.N. Cai, Nat. Commun. 9(2018)4063.
[25]	T. Yang, Y.L. Zhao, Y. Tong, Z.B. Jiao, J. Wei, J.X. Cai, X.D. Han, D. Chen, A. Hu, J. J.Kai, K. Lu, Y. Liu, C.T. Liu, Science 362 (2018) 933-937.
[26]	C.H. Hu, J.L. Zhang, Y.H. Zhang, K. Han, C.M. Li, C.J. Song, Q.J. Zhai, J. Iron SteelRes. Int. 25(2018) 877-882.
[27]	L.B. Chen, R. Wei, K. Tang, J. Zhang, F. Jiang, L. He, J. Sun, Mater. Sci. Eng. A 716(2018) 150-156.
[28]	F.L. Meng, I. Baker, J. Alloys Compd. 645(2015) 376-381.
[29]	Z.W. Wang, I. Baker, Z.H. Cai, S. Chen, J.D. Poplawsky, W. Guo, Acta Mater. 120(2016) 228-239.
[30]	Z. Wu, C.M. Parish, H. Bei, J. Alloys Compd. 647(2015) 815-822.
[31]	M. Laurent-Brocq, A. Akhatova, L. Perrière, S. Chebini, X. Sauvage, E. Leroy, Y. Champion, Acta Mater. 88(2015) 355-365.
[32]	A. Heczel, M. Kawasaki, J.L. Lábár, J. Jang, T.G. Langdon, J. Gubicza, J. AlloysCompd. 711(2017) 143-154.
[33]	H.K. Yang, Z.J. Zhang, Z.F. Zhang, Scr. Mater. 68(2013) 992-995.
[34]	J. Shi, X.J. Sun, M.Q. Wang, W.J. Hui, H. Dong, W.Q. Cao, Scr. Mater. 63(2010)815-818.
[35]	M.H. Cai, Z. Li, Q. Chao, P.D. Hodgson, Metall. Mater. Trans. A 45 (2014)5624-5634.
[36]	S. Guo, C. Ng, J. Lu, C.T. Liu,J. Appl. Phys. 109(2011), 103505.
[37]	M. Yang, D. Yan, F. Yuan, P. Jiang, E. Ma, X. Wu, Proc. Natl. Acad. Sci. U. S. A. 115(2018) 7224-7229.
[38]	S.J. Sun, Y.Z. Tian, H.R. Lin, S. Lu, H.J. Yang, Z.F. Zhang, Scr. Mater. 163(2019)111-115.

Microstructure and mechanical properties of Fe_xCoCrNiMn high-entropy alloys

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

图/表 4

参考文献

相关文章 0

编辑推荐

Metrics

本文评价