Type Inversion and Certain Physical Properties of Spray Pyrolysed SnO2:Al Films for Novel Transparent Electronics Applications

doi:10.1016/j.jmst.2013.09.019

J. Mater. Sci. Technol.

• Reviews • 下一篇

K. Ravichandran, K. Thirumurugan

收稿日期:2013-03-18 修回日期:2013-05-22 出版日期:2014-02-15 发布日期:2014-02-14

Type Inversion and Certain Physical Properties of Spray Pyrolysed SnO₂:Al Films for Novel Transparent Electronics Applications

K. Ravichandran, K. Thirumurugan

Post Graduate and Research Department of Physics, AVVM Sri Pushpam College (Autonomous), Poondi, Thanjavur 613 503,Tamil Nadu, India

Received:2013-03-18 Revised:2013-05-22 Online:2014-02-15 Published:2014-02-14
Contact: K.Ravichandran
Supported by:
Financial support from the University Grants Commission of India through the Major Research Project (F. No. 40-28/2011(SR)) is gratefully acknowledged.

摘要/Abstract

关键词: Tin oxide films, P-type transparent conducting oxide (TCO), Spray pyrolysis, Transparent electronics, Electrical properties, Optical properties

Abstract:

Aluminium doped tin oxide films have been deposited onto glass substrates by using a simplified and low cost spray pyrolysis technique. The Al doping level varies between 0 and 30 at.% in the step of 5 at.%. The resistivity (ρ) is the minimum (0.38 Ω cm) for 20 at.% of Al doping. The possible mechanism behind the phenomenal zig-zag variation in resistivity with respect to Al doping is discussed in detail. The nature of conductivity changes from n-type to p-type when the Al doping level is 10 at.%. The results show that 20 at.% is the optimum doping level for good quality p-type SnO₂:Al films suitable for transparent electronic devices.

Key words: Tin oxide films, P-type transparent conducting oxide (TCO), Spray pyrolysis, Transparent electronics, Electrical properties, Optical properties

K. Ravichandran, K. Thirumurugan. [J]. J. Mater. Sci. Technol., DOI: 10.1016/j.jmst.2013.09.019.

K. Ravichandran, K. Thirumurugan. Type Inversion and Certain Physical Properties of Spray Pyrolysed SnO₂:Al Films for Novel Transparent Electronics Applications[J]. J. Mater. Sci. Technol., DOI: 10.1016/j.jmst.2013.09.019.

参考文献

[1] S. Peng, F. Cheng, J. Liang, Z. Tao, J. Chen, J. Alloys Compd. 481(2009) 786-791.

[2] S.F. Tseng,W.T. Hsiao, D.Y. Chiang, K.C. Huang, C.P. Chou, Appl.Surf. Sci. 257 (2011) 7204-7209.

[3] G. Muruganantham, K. Ravichandran, K. Saravanakumar, K.Swaminathan, N.J. Begum, B. Sakthivel, Cryst. Res. Technol. 47(2012) 429-436.

[4] Y. Chang, Y. Yao, B. Wang, H. Luo, T. Li, L. Zhi, J. Mater. Sci.Technol. 29 (2013) 157-160.

[5] W.Y. Zhang, Z.Z. Liu, Y.X. Han, Z.X. Fu, Optoelectronic. Adv.Mater. Rapid Commun. 4 (2010) 681-684.

[6] P. Ravikumar, K. Ravichandran, B. Sakthivel, J. Mater. Sci. Technol.28 (2012) 999-1003.

[7] D. Passeri, M. Rossi, A. Alippi, A. Bettucci, D. Manno, A. Serra,E. Filippo, M. Lucci, I. Davoli, Superlatt. Microstruct. 44 (2008)641-649.

[8] R. Ranjusha, P. Lekha, K.R.V. Subramanian, V. Nair Shantikumar,A. Balakrishnan, J. Mater. Sci. Technol. 27 (2011) 961-966.

[9] D.U. Lee, S.J. Han, K.B. Seo, E.K. Kim, J.W. Shin, W.J. Cho, Y.H.Kim, Superlatt. Microstruct. 46 (2009) 176-181.

[10] B. Zhang, Y. Tian, J.X. Zhang, W. Cai, Optoelectronic. Adv. Mater.Rapid Commun. 4 (2010) 1158-1162.

[11] H.W. Ra, K.J. Kim, Y.H. Im, Superlatt. Microstruct. 44 (2008)728-734.

[12] H.A. Mohamed, Optoelectronic. Adv. Mater. Rapid Commun. 3(2009) 936-941.

[13] S.K.F. Ahmed, S. Khan, P.K. Ghosh, M.K. Mitra, K.K. Chattopadhyay,J. Sol-Gel. Sci. Technol. 39 (2006) 241-247.

[14] M. Singh, A. RangaRao, V. Dutta, Mater. Lett. 62 (2008) 3613-3616.

[15] H. Hidenori, O. Masahiro, H. Masahiro, U. Kazushige, H. Hideo, J.Appl. Phys. 91 (2002) 9177-9181.

[16] H. Ohta, M. Orita, M. Hirano, I. Yagi, K. Ueda, H. Hosono, J. Appl.Phys. 91 (2002) 3074-3078.

[17] K. Thirumurugan, K. Ravichandran, R. Mohan, S. Snega, S. Jothiramalingam,R. Chandramohan, Surf. Eng. 29 (2013) 373-378.

[18] K. Ravichandran, K. Saravanakumar, G. Muruganantham, B.Sakthivel, Surf. Eng. 26 (2010) 620-622.

[19] S. Snega, K. Ravichandran, N.J. Begam, K. Thirumurugan, J.Mater. Sci. Mater. Electron. 24 (2013) 135-141.

[20] K. Ravichandran, G. Muruganantham, B. Sakthivel, P. Philominathan,Surf. Eng. 28 (2010) 590-595.

[21] N. Jabena Begum, R. Mohan, K. Ravichandran, Superlatt. Microstruct.53 (2013) 89-98.

[22] R. Anandhi, R. Mohan, K. Swaminathan, K. Ravichandran,Superlatt. Microstruct. 51 (2012) 680-689.

[23] Y. Sawada, C. Kobayashi, S. Seki, H. Funakubo, Thin Solid Films 409 (2002) 46-50.

[24] K. Ravichandran, G. Muruganantham, B. Sakthivel, Physica B 404(2009) 4299-4302.

[25] T. Fukano, T. Motohiro, Sol. Energy Mater. Sol. Cells 82 (2004)567-575.

[26] K. Ravichandran, B. Sakthivel, P. Philominathan, Cryst. Res.Technol. 45 (2010) 292-298.

[27] G. Muruganantham, K. Ravichandran, K. Saravanakumar, A.T. Ravichandran,B. Sakthivel, Superlatt. Microstruct. 50 (2011) 722-733.

[28] M.M. Bagheri-Mohagheghi, M. Shokooh- Saremi, J. Phys. D - Appl.Phys. 37 (2004) 1248-1253.

[29] B. Thangaraju, Thin Solid Films 402 (2002) 71-78.

[30] A. Smith, J.M. Laurent, D.S. Smith, J.P. Bonnet, R.R. Clemente,Thin Solid Films 266 (1995) 20-30.

[31] S. Shanthi, C. Subramanian, P. Ramasamy, J. Cryst. Growth 197(1999) 858-864.

[32] D. Belanger, J.P. Dodelet, B.A. Lombos, J.I. Dickson, J. Electrochem.Soc. 132 (1985) 1398-1405.

[33] C. Agashe, S. Mahamuni, Thin Solid Films 518 (2010) 4868-4873.

[34] V. De la Garza-Guadarrama, A. Sanchez-Juarez, A. Tiburcio-Silver,A. Ortiz, J. Mater. Sci. Lett. 20 (2001) 219-221.

[35] G. Korotcenkov, M. DiBattista, J. Schwank, V. Brinzari, Mater. Sci.Eng. B 77 (2000) 33-39.

[36] V. Bilgin, S. Kose, F. Atay, I. Akyuz, Mater. Chem. Phys. 94 (2005)103-108.

[37] A. Goswami, Thin Film Fundamentals, New Age International (P)Ltd. Publishers, New Delhi, 2005.

[38] J.S. Bhat, K.I. Maddani, A.M. Karguppikar, S. Ganesh, Nucl. Instr.Meth. Phys. Res. B 258 (2007) 369-374.

[39] E. Elangovan, K. Ramamurthy, J. Appl. Sci. 247 (2005) 183-196.

[40] K. Ravichandran, P. Philominathan, J. Mater. Sci. Mater. Electron.22 (2011) 158-161.

[41] J. Mazloom, F.E. Ghodsi, Mater. Res. Bull. 48 (2013) 1468-1476.

[42] S. Durgajanani, B.G. Jeyaprakash, R.J. Bosco Balaguru, Cryst. Res.Technol. 46 (2011) 685-690.

[43] G. Haccke, J. Appl. Phys. 47 (1976) 4086-4089.

[44] K. Vijayalakshmi, K. Karthick, D. Gopalakrishna, Ceram. Int. 39(2013) 4749-4756.

[45] S.K. Sinha, R. Bhattacharya, S.K. Ray, I. Manna, Mater. Lett. 65(2011) 146-149.

[46] S. Chen, X. Zhao, H. Xie, J. Liu, L. Duan, X. Ba, J. Zhao, Appl.Surf. Sci. 258 (2012) 3255-3259.

[47] L. Dua, P.K. Biswas, Appl. Surf. Sci. 280 (2013) 33-41.

[48] F. Gu, S.F. Wang, M.K. Lu, Y.X. Qi, G.J. Zhou, D. Xu, D.R. Yuan,Inorg. Chem. Commun. 6 (2003) 882-885.

Type Inversion and Certain Physical Properties of Spray Pyrolysed SnO₂:Al Films for Novel Transparent Electronics Applications

RichHTML

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 6

编辑推荐

Metrics

本文评价

[1]	Tingzhi Liu, Yangyang Li, Huan Ke, Yuhai Qian, Shuwang Duo, Yanli Hong, Xinyuan Sun. Chemical Bath Co-deposited ZnS Film Prepared from Different Zinc Salts: ZnSO₄-Zn(CH₃COO)₂, Zn(NO₃)₂-Zn(CH₃COO)₂, or ZnSO₄-Zn(NO₃)₂[J]. J. Mater. Sci. Technol., 2016, 32(3): 207-217.
[2]	Sushant K. Rawal Amit Kumar Chawla R. Jayaganthan Ramesh Chandra. Structural, wettability and optical investigation of titanium oxynitride coatings : Effect of various sputtering parameters[J]. J. Mater. Sci. Technol., 2012, 28(6): 512-523.
[3]	吴飞张启龙杨辉. Fabrication, sintering and electrical properties of (Ca0.61,Nd0.26)TiO3 nanoparticles doped with Li-Cu-B[J]. J. Mater. Sci. Technol., 2011, 27(5): 426-430.
[4]	DingRui. Effects of Mg incorporation on the microstructure and optical properties of ZnO thin films prepared by sol-gel method[J]. J. Mater. Sci. Technol., 2010, 26(7): 601-604.
[5]	李云芳李辉. Structures and electronic, optical properties of hydrogen nanowires encapsulated in single-walled boron-nitride nanotubes[J]. J. Mater. Sci. Technol., 2010, 26(6): 542-546.
[6]	M. Rangacharyulu. EPR and Optical Absorption Studies on Copper Ions in Mixed Alkali Cadmium Phosphate Glasses[J]. J. Mater. Sci. Technol., 2009, 25(04): 531-534.