Effect of Hot Isostatic Pressing Conditions and Cooling Rate on Microstructure and Properties of Ti-6Al-4V Alloy from Atomized Powder

Lei Xu¹, Ruipeng Guo^1,², Chunguang Bai¹, Jiafeng Lei¹, Rui Yang¹

Fig. 4 SEM fracture surfaces of PM Ti-6Al-4V samples HIPped at: a 800 #cod#x000b0;C40 MPa, b 800 #cod#x000b0;C120 MPa, c 910 #cod#x000b0;C120 MPa.