[1]D.B.Spencer,R.Mehrabian and M.C.Flemings:Metall.Trans.,1972,3(6),1925. [2]Shuisheng XIE,Hongping PAN and Zhiyong DING:J.Plast.Eng.,2002,9(2),1.(in Chinese) [3]R.Kopp and H.Shimahara:in Proc.7th Int.Conf.on Semi-Solid Processing of Alloys and Composites,Tsukuba,Japan,2002,57-66. [4]Takao Kaneuchi,Ryoichi Shibata and Masahisa Ozawa:in Proc.7th Int.Conf.on Semi-Solid Processing of Al-loys and Composites,Tsukuba,Japan,2002,145-150. [5]A.Bührig-Polaczek and J.Aguilar:in Proc.8th Int.Conf.on Semi-Solid Processing of Alloys and Composites,Li-massol,Cyprus,2004. [6]W.G.Cho and C.G.Kang:J.Mater.Process.Technol.,2000,105(3),269. [7]Z.Koren,H.Rosenson,E.M.Gutman,Ya.B.Unigovski and A.Eliezer:J.Light Meted.,2002,(2),81. [8]Songyang ZHANG,Maopeng GENG,Shuisheng XIE,Xinmin ZHOU,Ying ZHANG and Yanchun WANG:J.Plast.Eng.,2005,12(1),55.(in Chinese) [9]A.Bührig-Polaczek and J.Aguilar:in Proc.8th Int.Conf.on Semi-Solid Processing of Alloys and Composites,Li-massol,Cyprus,2004. [10]D.Apelian:in Proc.8th Int.Conf.on Semi-Solid Pro-cessing of Alloys and Composites,Tsukuba,Japan,2002,25-30. [11]D.N.Li,J.R.Luo,S.S.Wu,Z.H.Xiao,Y.W.Mao,X.J.Song and G.Z.Wu:J.Mater.Process.Technol.,2002,129(1-3),431. [12]S.S.Xie,H.Q.Yang,H.Wang,X.G.Li and L.Li:in Proc.8th Int.Conf.on Semi-Solid Processing of Alloys and Composites,Limassol,Cyprus,2004. |