Ablation Property of Ceramics/Carbon Fibers/Resin Novel Super-hybrid Composite

Abstract

Abstract: A novel super-hybrid composite (NSHC) is prepared with three-dimension reticulated SiC ceramic (3DRC), high performance carbon fibers and modified phenolic resin (BPR) in this paper. Ablation performance of super-hybrid composite is studied. The results show that the NSHC has less linear ablation rate compared with pure BPR and CF/BPR composite, for example, its linear ablation rate is 50% of CF/BPR at the same fiber content. Mass ablation rate of the NSHC is slightly lower than that of pure BPR and CF/BPR composite because of their difference in the density. Scanning electron microscopic analysis indicates that 3DRC can increase anti-erosion capacity of materials because its special reticulated structure can control the deformation of materials and strengthen the stability of integral structure.

Key words: Ablation performance, Carbon fiber, Modified phenolic resin...

Jun QIU, Xiaoming CAO, Chong TIAN, Jinsong ZHANG. Ablation Property of Ceramics/Carbon Fibers/Resin Novel Super-hybrid Composite[J]. J Mater Sci Technol, 2005, 21(01): 92-94.

References

[1] Y.I.Dim Itrienko: Composites Part A, 1997, 28(50), 463.
[2] A.Saha Deuri, Anil K.Bhowmick, R.Ghosh, B.John,T.Sriram and S.K.De: Polymer Degradation and Stability, 1988, 21(1), 21.
[3] G.S.Pisarenko and G.N.Tretyachenko: Acta Astronau-tica, 1983, 10(7), 521.
[4] L.Monney, C.Dubois and A.Chambaudet: PolymerDegradation and Stability, 1997, 56(3), 357.
[5] Weihui JIANG, Jianer ZHOU and Xingfang HU: Ceramics Technol., 2001, (4), 7. (in Chinese)
[6] R.R.Laher and L.R.Megill: Planetary and Spaces Sci.,1998, 36(12), 1497.
[7] Zhihai FENG, Ruilian YU, Chengzhao YAO and Zhong-ping LI: Aerospace Mater. Technol., 2001, (6), 10. ( inChinese)
[8] R.D.Patton, C.U.Pittman, Jr, L.Wang, J.R.Hill andA.Day: Composites Part A: Applied Science and Manufacturing, 2002, 33(2), 243.
[9] P.S.Sreejith, R.Krishnamurthy, S.K.Malhotra andK.Narayanasamy: J. Mater. Proc. Technol., 2000,104(1), 53.
[10] D.Cho and B.I.Yoom: Composites Sci. Technol., 2001,61(2), 271.
[11] Y.J.Lee and H.J.Joo: Surface and Coating Technol., 2004,180(2), 286.
[12] J.K.Park, D.Cho and T.J.Kang: Carbon, 2004, 24, 795.
[13] J.K.Park and T.J.Kang: Carbon, 2002, 40, 2125.
[14] J.B.Henderson, M.R.Tant and G.R.Moore andJ.A.Wiebelt: Tiermochimica Acta, 1981, 44(3), 253.
[15] L.N.Hugh, McManus, George S.Springer: Comp. Mater.,1992, (26), 206.
[16] Guangfu ZHANG: Polymer Sci. Technol., 1990, (5), 33.(in Chinese)
[17] Liansheng YAN, Dongmei YAO and Xuejun YANG:Aerospace Mater. Technol., 2002, (2), 29. (in Chinese)
[18] Mohamed O.Abdalla, A.Luduick and T.Mitchell: Poly-mer, 2003, (40), 7353.
[19] J.G.Gao, L.Xia and Y.F.Liu: Polymer Degradation andStability, 2004, 83, 71.
[20] Zhihai FENG, Ruilian YU, Chengzhao YAO and Zhong-ping LI: Aerospace Mater. Technol., 2001, (6), 10. (inChinese)
[21] G.Y.Tang, Y.J.Yan and X.N.Chen: Mater. Design, 2001,(22), 21.