[1] |
Lin Yuan, Jiangtao Xiong, Yajie Du, Jin Ren, Junmiao Shi, Jinglong Li.
Microstructure and mechanical properties in the TLP joint of FeCoNiTiAl and Inconel 718 alloys using BNi2 filler
[J]. J. Mater. Sci. Technol., 2021, 61(0): 176-185.
|
[2] |
Hui Jiang, Dongxu Qiao, Wenna Jiao, Kaiming Han, Yiping Lu, Peter K. Liaw.
Tensile deformation behavior and mechanical properties of a bulk cast Al0.9CoFeNi2 eutectic high-entropy alloy
[J]. J. Mater. Sci. Technol., 2021, 61(0): 119-124.
|
[3] |
Qin Xu, Dezhi Chen, Chongyang Tan, Xiaoqin Bi, Qi Wang, Hongzhi Cui, Shuyan Zhang, Ruirun Chen.
NbMoTiVSix refractory high entropy alloys strengthened by forming BCC phase and silicide eutectic structure
[J]. J. Mater. Sci. Technol., 2021, 60(0): 1-7.
|
[4] |
Xiaoxiao Li, Meiqiong Ou, Min Wang, Long Zhang, Yingche Ma, Kui Liu.
Effect of boron addition on the microstructure and mechanical properties of K4750 nickel-based superalloy
[J]. J. Mater. Sci. Technol., 2021, 60(0): 177-185.
|
[5] |
Yanhua Zeng, Fenfen Yang, Zongning Chen, Enyu Guo, Minqiang Gao, Xuejian Wang, Huijun Kang, Tongmin Wang.
Enhancing mechanical properties and corrosion resistance of nickel-aluminum bronze via hot rolling process
[J]. J. Mater. Sci. Technol., 2021, 61(0): 186-196.
|
[6] |
S.Z. Wu, X.G. Qiao, M.Y. Zheng.
Ultrahigh strength Mg-Y-Ni alloys obtained by regulating second phases
[J]. J. Mater. Sci. Technol., 2020, 45(0): 117-124.
|
[7] |
Zhaohui Shan, Jing Bai, Jianfeng Fan, Hongfei Wu, Hua Zhang, Qiang Zhang, Yucheng Wu, Weiguo Li, Hongbiao Dong, Bingshe Xu.
Exceptional mechanical properties of AZ31 alloy wire by combination of cold drawing and EPT
[J]. J. Mater. Sci. Technol., 2020, 51(0): 111-118.
|
[8] |
Mohammad Nasim, Yuncang Li, Ming Wen, Cuie Wen.
A review of high-strength nanolaminates and evaluation of their properties
[J]. J. Mater. Sci. Technol., 2020, 50(0): 215-244.
|
[9] |
Arash Afshar, Dorina Mihut.
Enhancing durability of 3D printed polymer structures by metallization
[J]. J. Mater. Sci. Technol., 2020, 53(0): 185-191.
|
[10] |
Fu-Zhi Dai, Haiming Zhang, Huimin Xiang, Yanchun Zhou.
Theoretical investigation on the stability, mechanical and thermal properties of the newly discovered MAB phase Cr4AlB4
[J]. J. Mater. Sci. Technol., 2020, 39(0): 161-166.
|
[11] |
Bin Hu, Xin Tu, Haiwen Luo, Xinping Mao.
Effect of warm rolling process on microstructures and tensile properties of 10¬タノMn steel
[J]. J. Mater. Sci. Technol., 2020, 47(0): 131-141.
|
[12] |
Qi Wang, Wen Shi, Bo Zhu, Dang Sheng Su.
An effective and green H2O2/H2O/O3 oxidation method for carbon nanotube to reinforce epoxy resin
[J]. J. Mater. Sci. Technol., 2020, 40(0): 24-30.
|
[13] |
Shucai Zhang, Huabing Li, Zhouhua Jiang, Zhixing Li, Jingxi Wu, Binbin Zhang, Fei Duan, Hao Feng, Hongchun Zhu.
Influence of N on precipitation behavior, associated corrosion and mechanical properties of super austenitic stainless steel S32654
[J]. J. Mater. Sci. Technol., 2020, 42(0): 143-155.
|
[14] |
Fu-Zhi Dai, Bo Wen, Yinjie Sun, Huimin Xiang, Yanchun Zhou.
Theoretical prediction on thermal and mechanical properties of high entropy (Zr0.2Hf0.2Ti0.2Nb0.2Ta0.2)C by deep learning potential
[J]. J. Mater. Sci. Technol., 2020, 43(0): 168-174.
|
[15] |
Enze Zhou, Dongxu Qiao, Yi Yang, Dake Xu, Yiping Lu, Jianjun Wang, Jessica A. Smith, Huabing Li, Hongliang Zhao, Peter K. Liaw, Fuhui Wang.
A novel Cu-bearing high-entropy alloy with significant antibacterial behavior against corrosive marine biofilms
[J]. J. Mater. Sci. Technol., 2020, 46(0): 201-210.
|