Please wait a minute...
J Mater Sci Technol  2004, Vol. 20 Issue (04): 454-456    DOI:
Research Articles Current Issue | Archive | Adv Search |
Model Building of Backup Roller Diameter Effect Rate in 4-High Mill
Jianzhong XU, Dianyao GONG, Xianghua LIU, Guodong WANG, Xiaolin ZHAO
State Key Lab. of Rolling and Automation, Northeastern University, Shenyang 1100004, China
Download:  HTML  PDF(265KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  Software for calculating the strip profile in 4-high hot rolling mill was developed using influence coefficient method. Regularity of backup roller diameter effect rate was studied systematically using the software. The results show that backup roller diameter effect rates decrease versus the increase of strip width, increase significantly versus the increase of backup roller diameter and obscurely increase versus the increase of reduction. The difference between backup roller diameter effect rate and it is reference value increases versus strip width increasing. When backup rollers diameter is set to be 1.64 m and strip width is 1.85 m, the error of strip profile calculated using the model of backup roller diameter effect rate reference value will be 3.55 μm. Based on the results, reference values of roller diameter effect rate and six power polynomial fitting coefficients of modification coefficients were determined considering coherent parameters. The high precision model of backup roller diameter effect rate was established. When the model is used to predict strip profile, the accuracy is less than 5.0 μm.
Key words:  4-high mill      Influence coefficient method      Strip profile      Hot rolling...      
Received:  01 January 1900     
Corresponding Authors:  Dianyao GONG     E-mail:

Cite this article: 

Jianzhong XU, Dianyao GONG, Xianghua LIU, Guodong WANG, Xiaolin ZHAO. Model Building of Backup Roller Diameter Effect Rate in 4-High Mill. J Mater Sci Technol, 2004, 20(04): 454-456.

URL:     OR

[1] G.K.Yi and J.S.Li: The Hot Strip Rolling Technology of Japan, NEU press, Shenyang, 1993, 51-54. (in Chinese)
[2] Bing HAN, Xianghua LIU and Guodong WANG: Research on Iron and Steel, 1995, 84(3) , 22-28. (in Chinese)
[3] Masanori Kitahama: Iron Steel Eng., 1987, 64(11) , 34-43.
[4] G.E.Wood, Humphries Kenneth and P.W.Arnold: Metall. Plant Technol, 1989, 12(5) , 92-96.
[5] M.Espenhahn, K.E.Friedrich, H.Osterburg, P.Tese and W.Wolpert: Metall. Plant Technol., 1995, 18(1) , 18-22.
[6] Y.Shimizhu, J.Iwatani, Y.Yamasaki, T.Takeguchi and A.Kametani: Technology Review-Mitsubishi Heavy Industries, 2000, 37(2) , 45-47.
[7] S.X.Zhou, P.Funke and J.Zhong: Steel Research, 1996, 67(5) , 200-204. (in Chinese)
[8] J.C.Parks: ASIE Steel Technol., 2000, 77(7/8) , 60-62.
[9] Guodong WANG: Metallurgical Industry Press, Beijing, 1986, 11, 289-306.
[10] V.B.Ginzburg: High-Quality Steel Rolling: Theory and Practice, Marcel Dekker Inc, New York., 1993, 345-346.
[1] Jianzhong XU, Dianyao GONG, Wencai ZHANG, Xianwen CHANG, Xianghua LIU, Guodong WANG. Model Building of the Initial Crown Effect Rate in 4-High Mill[J]. J. Mater. Sci. Technol., 2005, 21(02): 165-169.
No Suggested Reading articles found!
ISSN: 1005-0302
CN: 21-1315/TG
About JMST
Privacy Statement
Terms & Conditions
Editorial Office: Journal of Materials Science & Technology , 72 Wenhua Rd.,
Shenyang 110016, China
Tel: +86-24-83978208

Copyright © 2016 JMST, All Rights Reserved.