Please wait a minute...
J Mater Sci Technol  2004, Vol. 20 Issue (04): 445-447    DOI:
Research Articles Current Issue | Archive | Adv Search |
Performance of Potassium Titanate Whisker Reinforced PPESK Composites
Minjie QU, Xigao JIAN, Wei HE, Gongxiong LIAO
Department of Polymer Science, Dalian University of Technology, Dalian 116012, China
Download:  HTML  PDF(790KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  A group of poly (phthalazinone ether sulfone ketone)/potassium-titanate-whisker (PPSEK/whisker) composites was prepared by coprecipitation from solution. The whisker surface was modified using titanate coupling agent prior to blending. The tensile, impact, morphology and thermal properties of the moulded composites were investigated. The measurements showed that the tensile strength and impact strength of the composites increased with increasing whiskers content up to 10 to 20 phr, thereafter they showed a decrease in the whiskers content reached 40 phr. At the same time, the modulus of the composites increased with increasing whiskers content. Scanning electron microscopy studies revealed that the whiskers within the composites were dispersed uniformly by treated with coupling agent. Finally, thermogravimetric analysis showed that the heat resistance of the composites tended to increase with increasing whisker content. The results were analysed and discussed in terms of established models of the behaviour of short-fiber reinforced composites.
Key words:  Poly (phthalazinone ether sulfone ketone)      Composites      Potassium titanate whiskers      
Received:  01 January 1900     
Corresponding Authors:  Xigao JIAN     E-mail:  jian4616@mail.dlptt.ln.cn

Cite this article: 

Minjie QU, Xigao JIAN, Wei HE, Gongxiong LIAO. Performance of Potassium Titanate Whisker Reinforced PPESK Composites. J Mater Sci Technol, 2004, 20(04): 445-447.

URL: 

https://www.jmst.org/EN/     OR     https://www.jmst.org/EN/Y2004/V20/I04/445

[1] Yan GAO, Ying DAI, Xigao JIAN, Shiming PENG, Junmin XUE and Shengjun LIU: Acta Polym. Sin., 2000, 3, 271. (in Chinese)
[2] Yanjun LIU, Xigao JIAN, Shengjun LIU, Jun ZHANG and Zhiyuan WANG: Acta Polym. Sin., 1999, 1, 37. (in Chinese)
[3] Yanjun LIU, Xigao JIAN and Shengjun LIU: Chinese J. Mater. Res., 2000, 1, 100. (in Chinese)
[4] M.Kobayashi, T.Takahashi, J.Takimoto and K.Koyama: Polymer, 1995, 36, 3927.
[5] Demei YU and Jinshen WU: Comp. Sci. Technol, 2000, 60, 499.
[6] S.C.Tjong and Y.Z.Meng: Polymer, 1999, 40, 7275.
[7] S.C.Tjong and Y.Z.Meng: Polymer, 1998, 22, 5461.
[8] Wei JIANG and S.C.Tjong: Polymer Degradation and Stability, 1999, 66, 241.
[9] J.C.Halpin and J.L.Kardos: Polymer. Eng. Sci., 1976, 16, 344.
[10] S.Lipatov: Polymer Reinforcement. Chemical Technology Publisher, Toronto, 1995, 105.
[1] Yan Xing, Jing Cheng, Jian Wu, Mengfei Zhang, Xing-ao Li, Wei Pan. Direct electrospinned La2O3 nanowires decorated with metal particles: Novel 1 D adsorbents for rapid removal of dyes in wastewater[J]. 材料科学与技术, 2020, 45(0): 84-91.
[2] P.A. Morton, H.C. Taylor, L.E. Murr, O.G. Delgado, C.A. Terrazas, R.B. Wicker. In situ selective laser gas nitriding for composite TiN/Ti-6Al-4V fabrication via laser powder bed fusion[J]. 材料科学与技术, 2020, 45(0): 98-107.
[3] Wang Zhongren, Gao Quanbin, Lv Peng, Li Xiuwan, Wang Xinghui, Qu Baihua. Facile fabrication of core-shell Ni3Se2/Ni nanofoams composites for lithium ion battery anodes[J]. 材料科学与技术, 2020, 38(0): 119-124.
[4] Xi Xie, Rui Yang, Yuyou Cui, Qing Jia, Chunguang Bai. Fabrication of textured Ti2AlC lamellar composites with improved mechanical properties[J]. 材料科学与技术, 2020, 38(0): 86-92.
[5] Oluwafunmilola Ola, Yu Chen, Qijian Niu, Yongde Xia, Tapas Mallick, Yanqiu Zhu. Ultralight three-dimensional, carbon-based nanocomposites for thermal energy storage[J]. 材料科学与技术, 2020, 36(0): 70-78.
[6] Przemysł Kot; aw, BaczmańAndrzej ski, GadalińElż ska; bieta, WrońSebastian ski, WrońMarcin ski, WróMirosł bel; aw, Gizo Bokuchava, ScheffzüChristian k, Krzysztof Wierzbanowski. Evolution of phase stresses in Al/SiCp composite during thermal cycling and compression test studied using diffraction and self-consistent models[J]. 材料科学与技术, 2020, 36(0): 176-189.
[7] Iftikhar Ahmad, Mohammad Islam, Nuha Al Habis, Shahid Parvez. Hot-pressed graphene nanoplatelets or/and zirconia reinforced hybrid alumina nanocomposites with improved toughness and mechanical characteristics[J]. 材料科学与技术, 2020, 40(0): 135-145.
[8] Kaustubh Bawane, Kathy Lu. Microstructure evolution of nanostructured ferritic alloy with and without Cr3C2 coated SiC at high temperatures[J]. 材料科学与技术, 2020, 43(0): 126-134.
[9] Tielong Han, Enzuo Liu, Jiajun Li, Naiqin Zhao, Chunnian He. A bottom-up strategy toward metal nano-particles modified graphene nanoplates for fabricating aluminum matrix composites and interface study[J]. 材料科学与技术, 2020, 46(0): 21-32.
[10] Xing Zhou, Jian Su, Chenxi Wang, Changqing Fang, Xinyu He, Wanqing Lei, Chaoqun Zhang, Zhigang Huang. Design, preparation and measurement of protein/CNTs hybrids: A concise review[J]. 材料科学与技术, 2020, 46(0): 74-87.
[11] Jifeng Zhang, Ting Jia, Huan Qiu, Heguo Zhu, Zonghan Xie. Effect of cooling rate upon the microstructure and mechanical properties of in-situ TiC reinforced high entropy alloy CoCrFeNi[J]. 材料科学与技术, 2020, 42(0): 122-129.
[12] Yaqi Shan, Mingliang Wang, Zengliang Shi, Milan Lei, Xiaoxuan Wang, Fu-Gen Wu, Huan-Huan Ran, Gowri Manohari Arumugam, Qiannan Cui, Chunxiang Xu. SERS-encoded nanocomposites for dual pathogen bioassay[J]. 材料科学与技术, 2020, 43(0): 161-167.
[13] Yangtao Zhou, Yuning Zan, Shijian Zheng, Xiaohong Shao, Qianqian Jin, Bo Zhang, Quanzhao Wang, Bolv Xiao, Xiuliang Ma, Zongyi Ma. Thermally stable microstructures and mechanical properties of B4C-Al composite with in-situ formed Mg(Al)B2[J]. 材料科学与技术, 2019, 35(9): 1825-1830.
[14] Haichao Sun, Zhiliang Ning, Jingli Ren, Weizhong Liang, Yongjiang Huang, Jianfei Sun, Xiang Xue, Gang Wang. Serration and shear avalanches in a ZrCu based bulk metallic glass composite in different loading methods[J]. 材料科学与技术, 2019, 35(9): 2079-2085.
[15] Xizhou Kai, Shuoming Huang, Lin Wu, Ran Tao, Yanjie Peng, Zemin Mao, Fei Chen, Guirong Li, Gang Chen, Yutao Zhao. High strength and high creep resistant ZrB2/Al nanocomposites fabricated by ultrasonic-chemical in-situ reaction[J]. 材料科学与技术, 2019, 35(9): 2107-2114.
No Suggested Reading articles found!
ISSN: 1005-0302
CN: 21-1315/TG
Home
About JMST
Privacy Statement
Terms & Conditions
Editorial Office: Journal of Materials Science & Technology , 72 Wenhua Rd.,
Shenyang 110016, China
Tel: +86-24-83978208
E-mail:JMST@imr.ac.cn

Copyright © 2016 JMST, All Rights Reserved.