Please wait a minute...
J Mater Sci Technol  2004, Vol. 20 Issue (04): 395-401    DOI:
Research Articles Current Issue | Archive | Adv Search |
Sliding Wear Behavior of Plasma Sprayed Alumina-Based Composite Coatings against Al2O3 Ball
Minh-quy Le, Young-hun Chae, Seock-sam Kim
Graduate School, School of Mechanical Engineering, Kyungpook National University, Daegu, South Korea
Download:  HTML  PDF(3657KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  The sliding wear behaviors of a single layer Al2O3-30 wt pct ZrO2, a double layer Al2O3-30 wt pct ZrO2/Ni-Cr and a single layer Al2O3-13 wt pct TiO2 coating deposited on low carbon steel by plasma spraying were investigated under lubricated conditions with various normal loads. The plastic deformation, detachment and pull out of splats were involved in the wear process of the studied coatings under test conditions. Crack propagation was found in Al2O3-13 wt pct TiO2 under loads of 70 and 100 N and in Al2O3-30 wt pct ZrO2/Ni-Cr under a load of 130 N. While increasing the normal load, the wear rates of Al2O3-30 wt pct ZrO2 and Al2O3-30 wt pct ZrO2/Ni-Cr slightly increased, the wear rate of Al2O3-13 wt pct TiO2 increased rapidly. The results showed that the Ni-Cr bonding layer improved the wear resistance of the coating system even it is relatively thin compared with the outer coating layer. The influence of this bonding layer on wear behavior of the coating increased as increasing the normal load.
Key words:  Coating      Plasma spray      Wear behavior      
Received:  01 January 1900     
Corresponding Authors:  Seock-sam Kim     E-mail:  sskim@knu.ac.kr

Cite this article: 

Minh-quy Le, Young-hun Chae, Seock-sam Kim. Sliding Wear Behavior of Plasma Sprayed Alumina-Based Composite Coatings against Al2O3 Ball. J Mater Sci Technol, 2004, 20(04): 395-401.

URL: 

https://www.jmst.org/EN/     OR     https://www.jmst.org/EN/Y2004/V20/I04/395

[1] D.Matejka and B.Benko: Plasma Spraying of Metallic and Ceramic Materials, John Wiley & Sons Ltd, Chichester, UK, 1989.
[2] Y.Xie and H.M.Hawthorne: Wear, 1999, 225-229, 90.
[3] Y.Jin and Y.Yang: Surf. Coatings Technol., 1997, 88, 248.
[4] K.Ramachandran, V.Selvarajan, P.V.Ananthapadmanabhan and K.P.Sreekumar: Thin Solid Films, 1998, 315, 144.
[5] S.Salman and Z.Cizmecioglu: J. Mater. Sci., 1998, 33, 4207.
[6] A.A.Abdel-Samad, A.M.M.El-Bahloul, E.Lugscheider and S.A.Rassoul: J. Mater. Sci., 2000, 35(12) , 3127.
[7] V.Fervel, B.Normand and C.Coddet: Wear, 1999, 230(1) , 70.
[8] Yuanzheng YANG, Youlan ZHU, Zhengyi LIU and Yuzhi CHUANG: Mater. Sci. Eng. A, 2000, 291(1-2) , 168.
[9] L.C.Erickson, H.M.Hawthorne and T.Troczynski: Wear, 2001, 250, 569.
[10] Y.Y.Yang, Y.S.Jin and T.Yan: Wear, 1997, 210 (1-2) , 136.
[11] Y.Xie and H.M.Hawthorne: Wear, 1999, 233-235, 293.
[12] Y.H.Chae and S.S.Kim: Trans. KSME, 2002, 16, 911.
[13] Y.Yang, Z.Liu, C.Luo and Y.Chuang: Surf. Coatings Technol., 1997, 89(1-2) , 97.
[14] M.Nishida, T.Hanabusa and H.Fujiwara: Surf. Coatings Tech-nol., 1993, 61, 47.
[15] E.Lugscheider and L.Kvernes: Thermal Barrier Coatings: Powder Spray Process and Coating Technology, eds., N.B. Da-hotre and T.S.Sudarshan, Intermetallic and Ceramic Coatings, Mazul-Dehher, 1999, 267.
[16] K.Holmberg and A.Matthews: Coatings Tribology, ed. D.Dowson, Elsevier, Netherlands, 1994.
[17] W.C.Oliver and G.M.Pharr: J. Mater. Research, 1992, 7(6) , 1564.
[18] G.M.Pharr, W.C.Oliver and F.R.Brotzen: J. Mater. Research, 1992, 7(3) , 613.
[19] A.F.Evans and T.R.Wilshaw: Acta. Metall, 1976, 24, 939.
[20] J.F.Shackelford and W.Alexander: Materials Science and Engineering Handbook, CRC Press, third edition, 2001.
[1] P.A. Morton, H.C. Taylor, L.E. Murr, O.G. Delgado, C.A. Terrazas, R.B. Wicker. In situ selective laser gas nitriding for composite TiN/Ti-6Al-4V fabrication via laser powder bed fusion[J]. 材料科学与技术, 2020, 45(0): 98-107.
[2] Chavez Juan J.Gomez, Ravisankar Naraparaju, Peter Mechnich, Klemens Kelm, Uwe Schulz, C.V. Ramana. Effects of yttria content on the CMAS infiltration resistance of yttria stabilized thermal barrier coatings system[J]. 材料科学与技术, 2020, 43(0): 74-83.
[3] Zhao-Qi Zhang, Rong-Chang Zeng, Cun-Guo Lin, Li Wang, Xiao-Bo Chen, Dong-Chu Chen. Corrosion resistance of self-cleaning silane/polypropylene composite coatings on magnesium alloy AZ31[J]. 材料科学与技术, 2020, 41(0): 43-55.
[4] Emese Lantos, László Mérai, Ágota Deák, Juan Gómez-Pérez, Dániel Sebők, Imre Dékány, Zoltán Kónya, László Janovák. Preparation of sulfur hydrophobized plasmonic photocatalyst towards durable superhydrophobic coating material[J]. 材料科学与技术, 2020, 41(0): 159-167.
[5] Wei Xu, Xin Lu, Jingjing Tian, Chao Huang, Miao Chen, Yu Yan, Luning Wang, Xuanhui Qu, Cuie Wen. Microstructure, wear resistance, and corrosion performance of Ti35Zr28Nb alloy fabricated by powder metallurgy for orthopedic applications[J]. 材料科学与技术, 2020, 41(0): 191-198.
[6] Liting Guo, Changdong Gu, Jie Feng, Yongbin Guo, Yuan Jin, Jiangping Tu. Hydrophobic epoxy resin coating with ionic liquid conversion pretreatment on magnesium alloy for promoting corrosion resistance[J]. 材料科学与技术, 2020, 37(0): 9-18.
[7] Hao Du, Chuanyu Cui, Housheng Liu, Guihong Song, Tianying Xiong. Improvement on compressive properties of lotus-type porous copper by a nickel coating on pore walls[J]. 材料科学与技术, 2020, 37(0): 114-122.
[8] C. Garcia-Cabezon, C. Garcia-Hernandez, M.L. Rodriguez-Mendez, F. Martin-Pedrosa. A new strategy for corrosion protection of porous stainless steel using polypyrrole films[J]. 材料科学与技术, 2020, 37(0): 85-95.
[9] Wenzhi Li, Lihong Gao, Zhuang Ma, Yanbo Liu, Fuchi Wang, Jiawei Wang, Lijun Wang, Hezhang Li. Effect of Ni content on high power laser ablation behavior of coatings sprayed by Ni covering graphite/SiO2 powders[J]. 材料科学与技术, 2020, 47(0): 38-44.
[10] Lanlan Yang, Minghui Chen, Jinlong Wang, Yanxin Qiao, Pingyi Guo, Shenglong Zhu, Fuhui Wang. Microstructure and composition evolution of a single-crystal superalloy caused by elements interdiffusion with an overlay NiCrAlY coating on oxidation[J]. 材料科学与技术, 2020, 45(0): 49-58.
[11] Suyun Liu, Li Liu, Ying Li, Fuhui Wang. Effects of N-alkylation on anticorrosion performance of doped polyaniline/epoxy coating[J]. 材料科学与技术, 2020, 39(0): 48-55.
[12] Chengxu Wang, Wei Chen, Minghui Chen, Demin Chen, Ke Yang, Fuhui Wang. Effect of TiN diffusion barrier on elements interdiffusion behavior of Ni/GH3535 system in LiF-NaF-KF molten salt at 700 ℃[J]. 材料科学与技术, 2020, 45(0): 125-132.
[13] Paul C. Uzoma, Fuchun Liu, En-Hou Han. Multi-stimuli-triggered and self-repairable fluorocarbon organic coatings with urea-formaldehyde microcapsules filled with fluorosilane[J]. 材料科学与技术, 2020, 45(0): 70-83.
[14] Yong-Xin Yang, Zhe Fang, Yi-Hao Liu, Ya-Chen Hou, Li-Guo Wang, Yi-Fan Zhou, Shi-Jie Zhu, Rong-Chang Zeng, Yu-Feng Zheng, Shao-Kang Guan. Biodegradation, hemocompatibility and covalent bonding mechanism of electrografting polyethylacrylate coating on Mg alloy for cardiovascular stent[J]. 材料科学与技术, 2020, 46(0): 114-126.
[15] Jian Wang, Lanyue Cui, Yande Ren, Yuhong Zou, Jinlong Ma, Chengjian Wang, Zhongyin Zheng, Xiaobo Chen, Rongchang Zeng, Yufeng Zheng. In vitro and in vivo biodegradation and biocompatibility of an MMT/BSA composite coating upon magnesium alloy AZ31[J]. 材料科学与技术, 2020, 47(0): 52-67.
No Suggested Reading articles found!
ISSN: 1005-0302
CN: 21-1315/TG
Home
About JMST
Privacy Statement
Terms & Conditions
Editorial Office: Journal of Materials Science & Technology , 72 Wenhua Rd.,
Shenyang 110016, China
Tel: +86-24-83978208
E-mail:JMST@imr.ac.cn

Copyright © 2016 JMST, All Rights Reserved.