Please wait a minute...
J Mater Sci Technol  2004, Vol. 20 Issue (04): 373-378    DOI:
Research Articles Current Issue | Archive | Adv Search |
Optimizing the Machining Parameters for Minimum Surface Roughness in Turning of GFRP Composites Using Design of Experiments
K.Palanikumar,L.Karunamoorthy, R.Karthikeyan
Department of Mechanical & Production Engineering, Sathyabama Institute of Science & Technology, Deemed University, Chennai-119, India
Download:  HTML  PDF(1206KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  In recent years, glass fiber reinforced plastics (GFRP) are being extensively used in variety of engineering applications in many different fields such as aerospace, oil, gas and process industries. However, the users of FRP are facing difficulties to machine it, because of fiber delamination, fiber pull out, short tool life, matrix debonding, burning and formation of powder like chips. The present investigation focuses on the optimization of machining parameters for surface roughness of glass fiber reinforced plastics (GFRP) using design of experiments (DoE). The machining parameters considered were speed, feed, depth of cut and workpiece (fiber orientation). An attempt was made to analyse the influence of factors and their interactions during machining. The results of the present study gives the optimal combination of machining parameters and this will help to improve the machining requirements of GFRP composites.
Key words:  Optimization      Turning      GFRP composites      Surface roughness      
Received:  01 January 1900     
Corresponding Authors:  K.Palanikumar     E-mail:  palanikumar¡k@yahoo.com

Cite this article: 

K.Palanikumar, L.Karunamoorthy, R.Karthikeyan. Optimizing the Machining Parameters for Minimum Surface Roughness in Turning of GFRP Composites Using Design of Experiments. J Mater Sci Technol, 2004, 20(04): 373-378.

URL: 

https://www.jmst.org/EN/     OR     https://www.jmst.org/EN/Y2004/V20/I04/373

[1] W.Konig, Ch.Wulf, P.Grab and H.Willerscheid: Annals of CIRP, 1985, 34, 537.
[2] G.C.Evestine and T.G.Rogers: J. Comp. Mater., 1971, 5, 94.
[3] Sakuma and Seto: Bulletin Of The JSME, 1983, 26(28) , 1420.
[4] N.Bhatnagar, N.Ramakrishnan, N.K.Naik and R.Komanduri:Int. J. Mach. Tools Manufact, 1995, 35(5) , 701.
[5] H.Takeyama and Ikutoku: Annals Of The CIRP, 1988, 37/1,93.
[6] W.Konig and P.Grab: Annals Of The CIRP, 1989, 38/1, 119.
[7] J.Raveendra and R.S.Parmer: Metal Construction 1987, 19, 1.
[8] Robert H.Lochner, Joseph E.Matar: Designing for Quality,Chapman & Hall, 1990.
[9] V.Balasubramanian and B.Guha: Inter. J. Pressure Vesselsand Piping, 1999, 76, 147.
[10] Else Eriksen: Inter. J. Machine Tools and Manufacture, 1999,39, 1611.
[11] Richard A.Johnson: Miller & Freund's Probability and Statistics for Engineers, Prentice-Hall of India Private Limited, 2000.
[12] K.Palanikumar and L.Karunamoorthy: J. NDT & Evaluation,2002, 37, 3.
[13] Ranga Komanduri: Mechan. Eng., 1993, 58.
[14] Santhanakrishnan.G: Ph.D thesis, IITMadras, India, 1990.
[15] Paulo Davim: J. Mater. Proc. Technol., 2001, 116, 305.
[1] Wandong Xing, Zijie Wei, Rong Yu, Fanyan Meng. Prediction of stable high-pressure structures of tantalum nitride TaN2[J]. 材料科学与技术, 2019, 35(10): 2297-2304.
[2] Jiewen Wang, Shuyuan Zhang, Ziqing Sun, Hai Wang, Ling Ren, Ke Yang. Optimization of mechanical property, antibacterial property and corrosion resistance of Ti-Cu alloy for dental implant[J]. 材料科学与技术, 2019, 35(10): 2336-2344.
[3] Sascha Vongehr, Shaochun Tang, Xiangkang Meng. Adapting Nanotech Research as Nano-Micro Hybrids Approach Biological Complexity, A Review[J]. J. Mater. Sci. Technol., 2016, 32(5): 387-401.
[4] Shuyi Wu, Xinglong Wu, Paul K. Chu. Ink Dispersion on Qianlong Xuan Paper with Improved Ink Expression[J]. J. Mater. Sci. Technol., 2016, 32(2): 182-188.
[5] Jun Chen, Yingwei Song, Dayong Shan, En-Hou Han. In Situ Growth Process of Mg-Al Hydrotalcite Conversion Film on AZ31 Mg Alloy[J]. J. Mater. Sci. Technol., 2015, 31(4): 384-390.
[6] Xianfei Wang, Shoumei Xiong. Characterization of Microstructural and Morphological Properties in As-deposited Ta/NiFe/IrMn/CoFe/Ta Multilayer System[J]. J. Mater. Sci. Technol., 2014, 30(4): 359-364.
[7] Jun Li,Yongwei Zhu,Dunwen Zuo,Yong Zhu,Chuangtian Chen. Optimization of Polishing Parameters with Taguchi Method for LBO Crystal in CMP[J]. J. Mater. Sci. Technol., 2009, 25(05): 703-707.
[8] Lijian Pan,Boming Zhang,Fuhong Dai. Multi-objective Optimization of Co-cured Composite Laminates with Embedded Viscoelastic Damping Layer[J]. J. Mater. Sci. Technol., 2009, 25(05): 708-712.
[9] Kee-Hyeon Cho, Byung-Moon Kim. Numerical Analysis of Secondary Cooling in Continuous Slab Casting[J]. J. Mater. Sci. Technol., 2008, 24(03): 389-390.
[10] Zhizhong SUN, Henry HU, Xiang CHEN, Qigui WANG, Wenying YANG. Gating System Design for a Magnesium Alloy Casting[J]. J. Mater. Sci. Technol., 2008, 24(01): 93-95.
[11] Huiping YU, Yunkan SUI, Jing WANG, Fengyi ZHANG, Xiaolin DAI. Optimal Control of Oxygen Concentration in a Magnetic Czochralski Crystal Growth by Response Surface Methodology[J]. J. Mater. Sci. Technol., 2006, 22(02): 173-178.
[12] Yongkang ZHAO, Yang YAO, Weixian LIU, Caiyun ZHENG, Shujun LI. Fibroblast Adhesion and Proliferation on a New β Type Ti-39Nb-13Ta-4.6Zr Alloy for Biomedical Application[J]. J. Mater. Sci. Technol., 2006, 22(02): 205-210.
[13] K.Palanikumar, L.Karunamoorthy, R.Karthikeyan. Parametric Optimization to Minimise the Surface Roughnesson the Machining of GFRP Composites[J]. J. Mater. Sci. Technol., 2006, 22(01): 66-72.
[14] Shenfang YUAN, Yingdi XU, Ge PENG. New Developments in Structural Health Monitoring Based on Diagnostic Lamb Wave[J]. J. Mater. Sci. Technol., 2004, 20(05): 490-496.
[15] Juhua HUANG, Jinjun RAO, Xuefeng LI. Study on Process Parameters Optimization of Sheet Metal Forming Based on PFEA/ANN/GA[J]. J. Mater. Sci. Technol., 2003, 19(Supl.): 9-12.
No Suggested Reading articles found!
ISSN: 1005-0302
CN: 21-1315/TG
Home
About JMST
Privacy Statement
Terms & Conditions
Editorial Office: Journal of Materials Science & Technology , 72 Wenhua Rd.,
Shenyang 110016, China
Tel: +86-24-83978208
E-mail:JMST@imr.ac.cn

Copyright © 2016 JMST, All Rights Reserved.