[1] |
Xiaochun He, Yang Li, Yongjie Bi, Xiaomei Liu, Bing Zhou, Shangzhou Zhang, Shujun Li.
Finite element analysis of temperature and residual stress profiles of porous cubic Ti-6Al-4V titanium alloy by electron beam melting
[J]. J. Mater. Sci. Technol., 2020, 44(0): 191-200.
|
[2] |
Yufan Zhao, Yuichiro Koizumi, Kenta Aoyagi, Kenta Yamanaka, Akihiko Chiba.
Isothermal γ → ε phase transformation behavior in a Co-Cr-Mo alloy depending on thermal history during electron beam powder-bed additive manufacturing
[J]. J. Mater. Sci. Technol., 2020, 50(0): 162-170.
|
[3] |
M.P. Miles, T.W. Nelson, C. Gunter, F.C. Liu, L. Fourment, T. Mathis.
Predicting recrystallized grain size in friction stir processed 304L stainless steel
[J]. J. Mater. Sci. Technol., 2019, 35(4): 491-498.
|
[4] |
Zhe Shen, Minghu Peng, Dongsheng Zhu, Tianxiang Zheng, Yunbo Zhong, Weili Ren, Chuanjun Li, Weidong Xuan, Zhongming Ren.
Evolution of the microstructure and solute distribution of Sn-10wt% Bi alloys during electromagnetic field-assisted directional solidification
[J]. J. Mater. Sci. Technol., 2019, 35(4): 568-577.
|
[5] |
Q. Wen, W.Y. Li, W.B. Wang, F.F. Wang, Y.J. Gao, V. Patel.
Experimental and numerical investigations of bonding interface behavior in stationary shoulder friction stir lap welding
[J]. J. Mater. Sci. Technol., 2019, 35(1): 192-200.
|
[6] |
Gaoqiang Chen, Qingxian Ma, Shuai Zhang, Jianjun Wu, Gong Zhang, Qingyu Shi.
Computational fluid dynamics simulation of friction stir welding: A comparative study on different frictional boundary conditions
[J]. J. Mater. Sci. Technol., 2018, 34(1): 128-134.
|
[7] |
Yunqiang Zhao, Chungui Wang, Jizhong Li, Jinhong Tan, Chunlin Dong.
Local melting mechanism and its effects on mechanical properties of friction spot welded joint for Al-Zn-Mg-Cu alloy
[J]. J. Mater. Sci. Technol., 2018, 34(1): 185-191.
|
[8] |
S.D. Ji, Y.Y. Jin, Y.M. Yue, S.S. Gao, Y.X. Huang, L. Wang.
Effect of Temperature on Material Transfer Behavior at Different Stages of Friction Stir Welded 7075-T6 Aluminum Alloy
[J]. J. Mater. Sci. Technol., 2013, 29(10): 955-960.
|
[9] |
Nannan Song, Yikun Luan, Yunlong Bai, Z.A. Xu, Xiuhong Kang, Dianzhong Li.
Numerical Simulation of Solidification of Work Roll in Centrifugal Casting Process
[J]. J Mater Sci Technol, 2012, 28(2): 147-154.
|
[10] |
Guangquan Yue Boming Zhang Fuhong Dai Shanyi Du.
Three-dimensional Cure Simulation of Stiffened Thermosetting Composite Panels
[J]. J Mater Sci Technol, 2010, 26(5): 467-471.
|
[11] |
S.H. Song Y.S. Byun T.W. Ku W.J. Song J. Kim B.S. Kang.
Experimental and Numerical Investigation on Impact Performance of Carbon Reinforced Aluminum Laminates
[J]. J Mater Sci Technol, 2010, 26(4): 327-332.
|
[12] |
Lixia Zhang,Jicai Feng.
Effect of Reaction Layers on the Residual Stress of the Brazed TiC Cermets/Steel Joints
[J]. J Mater Sci Technol, 2009, 25(02): 203-207.
|
[13] |
Zhao ZHANG, Jun BIE, Yali LIU, Hongwu ZHANG.
Effect of Traverse/Rotational Speed on Material Deformations and Temperature Distributions in Friction Stir Welding
[J]. J Mater Sci Technol, 2008, 24(06): 907-914.
|
[14] |
Xiang XUE, Jinjun TANG.
Numerical Simulation of Microstructure and Microsegregation in Ni-Cu Alloy under Isothermal Condition
[J]. J Mater Sci Technol, 2008, 24(03): 391-394.
|
[15] |
Xiaojing LIU, Yongchao XU, Shijian YUAN.
Effects of Loading Paths on Hydrodynamic Deep Drawing with Independent Radial Hydraulic Pressure of Aluminum Alloy Based on Numerical Simulation
[J]. J Mater Sci Technol, 2008, 24(03): 395-399.
|