Influence of Slope and Slenderness Ratio on the Non-Column Volume in Skew Rolling

J Mater Sci Technol ›› 2003, Vol. 19 ›› Issue (Supl.): 192-194.

• Research Articles • Previous Articles Next Articles

Influence of Slope and Slenderness Ratio on the Non-Column Volume in Skew Rolling

Yongqiang KANG, Zhenghuan HU, Jinping LIU, Cuiping YANG, Huiping DU

Mechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China

Received:1900-01-01 Revised:1900-01-01 Online:2003-12-28 Published:2009-10-10
Contact: Yongqiang KANG

Abstract

Abstract: A definition of non-column volume ratio (NCVR) is brought forward by the authors. It is influenced greatly by the slenderness ratio of the cylindrical billet and the slope of the wedge on the tool of skew rolling. Using the numerical simulation, the law of variation in NCVR during the forming process is found out. At the same time experiments have been carried out under different conditions, the result of which are found to be in good agreement with the theoretical predictions.

Key words: Skew rolling, FEM, Non-column volume

Yongqiang KANG, Zhenghuan HU, Jinping LIU, Cuiping YANG, Huiping DU. Influence of Slope and Slenderness Ratio on the Non-Column Volume in Skew Rolling[J]. J Mater Sci Technol, 2003, 19(Supl.): 192-194.

[1]	Weijie Ren, Dejia Liu, Qing Liu, Renlong Xin. Influence of texture distribution in magnesium welds on their non-uniform mechanical behavior: A CPFEM study [J]. J. Mater. Sci. Technol., 2020, 46(0): 168-176.
[2]	Yu Zhou, Qunbo Fan, Xin Liu, Duoduo Wang, Xinjie Zhu, Kai Chen. Multi-scale crystal plasticity finite element simulations of the microstructural evolution and formation mechanism of adiabatic shear bands in dual-phase Ti20C alloy under complex dynamic loading [J]. J. Mater. Sci. Technol., 2020, 59(0): 138-148.
[3]	Adnan Tahir, Guang-Rong Li, Mei-Jun Liu, Guan-Jun Yang, Cheng-Xin Li, Yu-Yue Wang, Chang-Jiu Li. Improving WC-Co coating adhesive strength on rough substrate: Finite element modeling and experiment [J]. J. Mater. Sci. Technol., 2020, 37(0): 1-8.
[4]	Peng Chen, Sheng Li, Yinghao Zhou, Ming Yan, Moataz M. Attallah. Fabricating CoCrFeMnNi high entropy alloy via selective laser melting in-situ alloying [J]. J. Mater. Sci. Technol., 2020, 43(0): 40-43.
[5]	Anil Kunwar, Lili An, Jiahui Liu, Shengyan Shang, Peter Råback, Haitao Ma, Xueguan Song. A data-driven framework to predict the morphology of interfacial Cu6Sn5 IMC in SAC/Cu system during laser soldering [J]. J. Mater. Sci. Technol., 2020, 50(0): 115-127.
[6]	J.J.J. Nivas, E. Allahyari, A. Vecchione, Q. Hao, S. Amoruso, X. Wang. Laser ablation and structuring of CdZnTe with femtosecond laser pulses [J]. J. Mater. Sci. Technol., 2020, 48(0): 180-185.
[7]	Huawei Rong, Haihua Hu, Jian Zhang, Jianjun Wang, Mu Zhang, Gaowu Qin, Yanhui Zhang, Xuefeng Zhang. Wüstite-type Fe_0.78Mn_0.22O nanocubes: A new class for high-sensitive T₂-weighted magnetic resonance imaging agent [J]. J. Mater. Sci. Technol., 2019, 35(11): 2485-2493.
[8]	Han Pei,Cheng Pengfei,Zhao Changli,Zhang Shaoxiang,Zhou Runhua,Zhang Xiaonong,Chai Yimin. Comparative Study about Degradation of High-purity Magnesium Screw in Intact Femoral Intracondyle and in Fixation of Femoral Intracondylar Fracture [J]. J. Mater. Sci. Technol., 2017, 33(3): 305-310.
[9]	Cheng Pengfei,Zhao Changli,Han Pei,Ni Jiahua,Zhang Shaoxiang,Zhang Xiaonong,Chai Yimin. Site-Dependent Osseointegration of Biodegradable High-Purity Magnesium for Orthopedic Implants in Femoral Shaft and Femoral Condyle of New Zealand Rabbits [J]. J. Mater. Sci. Technol., 2016, 32(9): 883-888.
[10]	Xiangwei Kong, Bin Li, Zhibo Jin, Wenran Geng. Broaching Performance of Superalloy GH4169 Based on FEM [J]. J Mater Sci Technol, 2011, 27(12): 1178-1184.
[11]	Qiang Zhang,Xingpeng Guo,Nengli Dai,Peixiang Lu. Corrosion and Fatigue Testing of Microsized 304 Stainless Steel Beams Fabricated by Femtosecond Laser [J]. J Mater Sci Technol, 2009, 25(02): 187-193.
[12]	Minghuan WANG, Di ZHU, Lei WANG. Preparation of Electrode Array by Electrochemical Etching Based on FEM [J]. J Mater Sci Technol, 2008, 24(06): 845-849.
[13]	Baoxing XU, Zufeng YUE. A Reverse Numerical Approach to Determine Elastic-plastic Properties of Multi-layer Material Systems with Flat Cylindrical Indenters [J]. J Mater Sci Technol, 2007, 23(05): 707-712.
[14]	Wei WANG, Zhongguang WANG, Aiping XIAN, Jianku SHANG. Microstructural Evolution and Cracking of Pb-free Ball Grid Array Assemblies under Thermal Cycling [J]. J Mater Sci Technol, 2007, 23(01): 85-91.
[15]	Xinyu LU, Shihong ZHANG, Hongliang HOU, Jizhen LI, Lixin ZHOU, Zhiqiang LI. Three Dimensional FE Analysis on Flange Bending for TC4 Alloy during Shear Spinning [J]. J Mater Sci Technol, 2006, 22(06): 855-859.

Influence of Slope and Slenderness Ratio on the Non-Column Volume in Skew Rolling

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments