[1] |
Peipei Ma, Chunhui Liu, Qiuyu Chen, Qing Wang, Lihua Zhan, Jianjun Li.
Natural-ageing-enhanced precipitation near grain boundaries in high-strength aluminum alloy
[J]. J. Mater. Sci. Technol., 2020, 46(0): 107-113.
|
[2] |
H.T. Jeong, W.J. Kim.
Grain size and temperature effect on the tensile behavior and deformation mechanisms of non-equiatomic Fe41Mn25Ni24Co8Cr2 high entropy alloy
[J]. J. Mater. Sci. Technol., 2020, 42(0): 190-202.
|
[3] |
A.G. Wang, X.H. An, J. Gu, X.G. Wang, L.L. Li, W.L. Li, M. Song, Q.Q. Duan, Z.F. Zhang, X.Z. Liao.
Effect of grain size on fatigue cracking at twin boundaries in a CoCrFeMnNi high-entropy alloy
[J]. J. Mater. Sci. Technol., 2020, 39(0): 1-6.
|
[4] |
Yinchuan Wang, Hua Huang, Gaozhi Jia, Guizhou Ke, Jian Zhang, Guangyin Yuan.
Effect of grain size on the mechanical properties of Mg foams
[J]. J. Mater. Sci. Technol., 2020, 58(0): 46-54.
|
[5] |
Xiankun Ji, Baoqi Guo, Fulin Jiang, Hong Yu, Dingfa Fu, Jie Teng, Hui Zhang, John J.Jonas.
Accelerated flow softening and dynamic transformation of Ti-6Al-4V alloy in two-phase region during hot deformation via coarsening α grain
[J]. J. Mater. Sci. Technol., 2020, 36(0): 160-166.
|
[6] |
Wei Li, Martina Vittorietti, Geurt Jongbloed, Jilt Sietsma.
The combined influence of grain size distribution and dislocation density on hardness of interstitial free steel
[J]. J. Mater. Sci. Technol., 2020, 45(0): 35-43.
|
[7] |
Xumin Zhu, Congyang Gong, Yun-Fei Jia, Runzi Wang, Chengcheng Zhang, Yao Fu, Shan-Tung Tu, Xian-Cheng Zhang.
Influence of grain size on the small fatigue crack initiation and propagation behaviors of a nickel-based superalloy at 650 °C
[J]. J. Mater. Sci. Technol., 2019, 35(8): 1607-1617.
|
[8] |
Shengyu Jiang, Ruihong Wang.
Grain size-dependent Mg/Si ratio effect on the microstructure and mechanical/electrical properties of Al-Mg-Si-Sc alloys
[J]. J. Mater. Sci. Technol., 2019, 35(7): 1354-1363.
|
[9] |
Gábor Ribárik, Bertalan Jóni, Tamás Ungár.
Global optimum of microstructure parameters in the CMWP line-profile-analysis method by combining Marquardt-Levenberg and Monte-Carlo procedures
[J]. J. Mater. Sci. Technol., 2019, 35(7): 1508-1514.
|
[10] |
M.P. Miles, T.W. Nelson, C. Gunter, F.C. Liu, L. Fourment, T. Mathis.
Predicting recrystallized grain size in friction stir processed 304L stainless steel
[J]. J. Mater. Sci. Technol., 2019, 35(4): 491-498.
|
[11] |
Y.Z. Tian, S.J. Sun, H.R. Lin, Z.F. Zhang.
Fatigue behavior of CoCrFeMnNi high-entropy alloy under fully reversed cyclic deformation
[J]. J. Mater. Sci. Technol., 2019, 35(3): 334-340.
|
[12] |
Haibin Wang, Mark Gee, Qingfan Qiu, Hannah Zhang, Xuemei Liu, Hongbo Nie, Xiaoyan Song, Zuoren Nie.
Grain size effect on wear resistance of WC-Co cemented carbides under different tribological conditions
[J]. J. Mater. Sci. Technol., 2019, 35(11): 2435-2446.
|
[13] |
H.K. Yang, K. Cao, Y. Han, M. Wen, J.M. Guo, Z.L. Tan, J. Lu, Y. Lu.
The combined effects of grain and sample sizes on the mechanical properties and fracture modes of gold microwires
[J]. J. Mater. Sci. Technol., 2019, 35(1): 76-83.
|
[14] |
P. Sharifi, J. Jamali, K. Sadayappan, J.T. Wood.
Grain Size Distribution and Interfacial Heat Transfer Coefficient during Solidification of Magnesium Alloys Using High Pressure Die Casting Process
[J]. J. Mater. Sci. Technol., 2018, 34(2): 324-334.
|
[15] |
Jian Feng, Bing Ye, Lijie Zuo, Ruijuan Qi, Qudong Wang, Haiyan Jiang, Rong Huang, Wenjiang Ding, Jie Yao, Chuntao Wang.
Effects of Zr, Ti and Sc additions on the microstructure and mechanical properties of Al-0.4Cu-0.14Si-0.05Mg-0.2Fe alloys
[J]. J. Mater. Sci. Technol., 2018, 34(12): 2316-2324.
|