J Mater Sci Technol ›› 2003, Vol. 19 ›› Issue (06): 613-616.

• Research Articles • Previous Articles     Next Articles

Slurry Preparation and Rolling of Semi-solid 60Si2Mn Spring Steel

Weimin MAO, Aimin ZHAO, Dong YUN, Leping ZHANG, Yonglin KANG   

  1. School of Materials Science and Engineering, University of Science & Technology Beijing, Beijing 100083, China
  • Received:1900-01-01 Revised:1900-01-01 Online:2003-11-28 Published:2009-10-10
  • Contact: Weimin MAO

Abstract: The nondendritic semi-solid slurry preparation of 60Si2Mn spring steel has been studied in this paper. The experiments have shown that when stirred for 2 min on the test condition, the semi-solid slurry with 50%~60% fraction solid and spherical primary austenitic grains in the size of 100~300 μm can be obtained and is easy to be discharged from the bottom little hole of the stirring chamber. The nondendritic slurry of 60Si2Mn spring steel can be rolled into given plate form successfully, but the solid phase and liquid phase is easy to be separated in rolling process so that the solid primary austenite is concentrated in the center and the liquid is near the edge of the rolled plate. The rupture strength and elongation of the plate rolled only once with semi-solid slurry are lower than that of the traditionally repeated hot-rolled plate of 60Si2Mn spring steel.

Key words: 60Si2Mn, Semi-solid, Electromagnetic stirring, Rolling