FEM Simulation of Bending Formability for Laminate Steel/Resin/Steel Lightweight Composite Sheet

J Mater Sci Technol ›› 2003, Vol. 19 ›› Issue (04): 324-326.

• Research Articles • Previous Articles Next Articles

FEM Simulation of Bending Formability for Laminate Steel/Resin/Steel Lightweight Composite Sheet

Guancheng LI, Yonglin KANG

Dept. of Basic Science Subjects, Huaihai Institute, Lianyungang 222000, China...

Received:1900-01-01 Revised:1900-01-01 Online:2003-07-28 Published:2009-10-10
Contact: Guancheng LI

Abstract

Abstract: The ANSYS simulation software was used to analyze the bending formability of laminate steel/resin/steel lightweight composite sheet. The skin steel at external side produces relative slipping-off change during the bending due to its composite structure. The internal stress strain states, materials effect tools parameters and intermediate layer resin of lightweight sheet on slipping-off change were analyzed. The spring back and shear stress state after bending have also been discussed.

Key words: Resin, Laminate steel sheet, Bending, Formability, Numerical simulation

Guancheng LI, Yonglin KANG. FEM Simulation of Bending Formability for Laminate Steel/Resin/Steel Lightweight Composite Sheet[J]. J Mater Sci Technol, 2003, 19(04): 324-326.

[1]	Dan Liu, Daoxin Liu, Mario Guagliano, Xingchen Xu, Kaifa Fan, Sara Bagherifard. Contribution of ultrasonic surface rolling process to the fatigue properties of TB8 alloy with body-centered cubic structure [J]. J. Mater. Sci. Technol., 2021, 61(0): 63-74.
[2]	Yufan Zhao, Yuichiro Koizumi, Kenta Aoyagi, Kenta Yamanaka, Akihiko Chiba. Isothermal γ → ε phase transformation behavior in a Co-Cr-Mo alloy depending on thermal history during electron beam powder-bed additive manufacturing [J]. J. Mater. Sci. Technol., 2020, 50(0): 162-170.
[3]	Juan Du, Aibing Chen, Yue Zhang, Shuang Zong, Haixia Wu, Lei Liu. PVP-assisted preparation of nitrogen doped mesoporous carbon materials for supercapacitors [J]. J. Mater. Sci. Technol., 2020, 58(0): 197-204.
[4]	Jo Min Chul, Jisung Yoo, Jo Min Cheol, Alireza Zargaran, Sohn Seok Su, Kim Nack J., Sunghak Lee. Effects of Cu addition on formability and surface delamination phenomenon in high-strength high-Mn steels [J]. J. Mater. Sci. Technol., 2020, 43(0): 44-51.
[5]	M.P. Miles, T.W. Nelson, C. Gunter, F.C. Liu, L. Fourment, T. Mathis. Predicting recrystallized grain size in friction stir processed 304L stainless steel [J]. J. Mater. Sci. Technol., 2019, 35(4): 491-498.
[6]	Zhe Shen, Minghu Peng, Dongsheng Zhu, Tianxiang Zheng, Yunbo Zhong, Weili Ren, Chuanjun Li, Weidong Xuan, Zhongming Ren. Evolution of the microstructure and solute distribution of Sn-10wt% Bi alloys during electromagnetic field-assisted directional solidification [J]. J. Mater. Sci. Technol., 2019, 35(4): 568-577.
[7]	Bo Song, Qingshan Yang, Tao Zhou, Linjiang Chai, Ning Guo, Tingting Liu, Shengfeng Guo, Renlong Xin. Texture control by {10-12} twinning to improve the formability of Mg alloys: A review [J]. J. Mater. Sci. Technol., 2019, 35(10): 2269-2282.
[8]	Gaoqiang Chen, Qingxian Ma, Shuai Zhang, Jianjun Wu, Gong Zhang, Qingyu Shi. Computational fluid dynamics simulation of friction stir welding: A comparative study on different frictional boundary conditions [J]. J. Mater. Sci. Technol., 2018, 34(1): 128-134.
[9]	Yunqiang Zhao, Chungui Wang, Jizhong Li, Jinhong Tan, Chunlin Dong. Local melting mechanism and its effects on mechanical properties of friction spot welded joint for Al-Zn-Mg-Cu alloy [J]. J. Mater. Sci. Technol., 2018, 34(1): 185-191.
[10]	D.M. Sekban, S.M. Akterer, O. Saray, Z.Y. Ma, G. Purcek. Formability of friction stir processed low carbon steels used in shipbuilding [J]. J. Mater. Sci. Technol., 2018, 34(1): 237-244.
[11]	Chen Jie, Bao Chonggao, Chen Wenhui, Zhang Li, Liu Jinling. Mechanical Properties and Fracture Behavior of Mg-Al/AlN Composites with Different Particle Contents [J]. J. Mater. Sci. Technol., 2017, 33(7): 668-674.
[12]	Li Xichao, Zheng Lili, Qian Yuhai, Xu Jingjun, Li Meishuan. Effects of High Temperature Oxidation on Mechanical Properties of Ti₃AlC₂ [J]. J. Mater. Sci. Technol., 2017, 33(6): 596-602.
[13]	Hyuk Kim Ki, Jun Moon In, Won Kim Ki, Bong Kang Ki, Gyu Park Byung, Seok Lee Kwang. Influence of Carbon Equivalent Value on the Weld Bead Bending Properties of High-Strength Low-Alloy Steel Plates [J]. J. Mater. Sci. Technol., 2017, 33(4): 321-329.
[14]	Di Hongshuang, Sun Qian, Wang Xiaonan, Li Jianping. Microstructure and properties in dissimilar/similar weld joints between DP780 and DP980 steels processed by fiber laser welding [J]. J. Mater. Sci. Technol., 2017, 33(12): 1561-1571.
[15]	Huang Yongjiang, Ning Zhiliang, Shen Zhe, Liang Weizhong, Sun Haicao, Sun Jianfei. Bending behavior of as-cast and annealed ZrCuNiAl bulk metallic glass [J]. J. Mater. Sci. Technol., 2017, 33(10): 1153-1158.

FEM Simulation of Bending Formability for Laminate Steel/Resin/Steel Lightweight Composite Sheet

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments