[1] |
Chaoyu Han, Shibo Wen, Feng Ye, Wenjia Wu, Shaowei Xue, Yongfeng Liang, Binbin Liu, Junpin Lin.
Deformation twinning in equiaxed-grained Fe-6.5 wt.%Si alloy after rotary swaging
[J]. J. Mater. Sci. Technol., 2020, 49(0): 25-34.
|
[2] |
Bingqiang Wei, Song Ni, Yong Liu, Xiaozhou Liao, Min Song.
Phase transformation and structural evolution in a Ti-5at.% Al alloy induced by cold-rolling
[J]. J. Mater. Sci. Technol., 2020, 49(0): 211-223.
|
[3] |
S.J. Tsianikas, Y. Chen, Z. Xie.
Deciphering deformation mechanisms of hierarchical dual-phase CrCoNi coatings
[J]. J. Mater. Sci. Technol., 2020, 39(0): 183-189.
|
[4] |
S.J. Tsianikas, Y. Chen, Z. Xie.
Deciphering deformation mechanisms of hierarchical dual-phase CrCoNi coatings
[J]. J. Mater. Sci. Technol., 2020, 39(0): 7-13.
|
[5] |
X.H. Zeng, P. Xue, L.H. Wu, D.R. Ni, B.L. Xiao, K.S. Wang, Z.Y. Ma.
Microstructural evolution of aluminum alloy during friction stir welding under different tool rotation rates and cooling conditions
[J]. J. Mater. Sci. Technol., 2019, 35(6): 972-981.
|
[6] |
Wen Zhang, Lili Tan, Dingrui Ni, Junxiu Chen, Ying-Chao Zhao, Long Liu, Cijun Shuai, Ke Yang, Andrej Atrens, Ming-Chun Zhao.
Effect of grain refinement and crystallographic texture produced by friction stir processing on the biodegradation behavior of a Mg-Nd-Zn alloy
[J]. J. Mater. Sci. Technol., 2019, 35(5): 777-783.
|
[7] |
Y.H. Fan, B. Zhang, J.Q. Wang, E.-H. Han, W. Ke.
Effect of grain refinement on the hydrogen embrittlement of 304 austenitic stainless steel
[J]. J. Mater. Sci. Technol., 2019, 35(10): 2213-2219.
|
[8] |
T.Y. Kwak, W.J. Kim.
Effect of refinement of grains and icosahedral phase on hot compressive deformation and processing maps of Mg-Zn-Y magnesium alloys with different volume fractions of icosahedral phase
[J]. J. Mater. Sci. Technol., 2019, 35(1): 181-191.
|
[9] |
Hailin H, Youping Yi, Shiquan Huang, Yuxun Zhang.
An improved process for grain refinement of large 2219 Al alloy rings and its influence on mechanical properties
[J]. J. Mater. Sci. Technol., 2019, 35(1): 55-63.
|
[10] |
Yalian Zhang, Fenghua Wang, Jie Dong, Li Jin, Conghui Liu, Wenjiang Ding.
Grain refinement and orientation of AZ31B magnesium alloy in hot flow forming under different thickness reductions
[J]. J. Mater. Sci. Technol., 2018, 34(7): 1091-1102.
|
[11] |
Sang-HoonKim, Jong UnLee, Ye JinKim, Jun HoBae, Bong SunYou, Sung HyukPark.
Accelerated precipitation behavior of cast Mg-Al-Zn alloy by grain refinement
[J]. J. Mater. Sci. Technol., 2018, 34(2): 265-276.
|
[12] |
Hong Yu, Ning Wang, Renguo Guan, Di Tie, Zheng Li, Yanan An, Yang Zhang.
Evolution of secondary phase particles during deformation of Al-5Ti-1B master alloy and their effect on α-Al grain refinement
[J]. J. Mater. Sci. Technol., 2018, 34(12): 2297-2306.
|
[13] |
Yang Huabing, Gao Tong, Wang Haichao, Nie Jinfeng, Liu Xiangfa.
Influence of C/Ti stoichiometry in TiCx on the grain refinement efficiency of Al-Ti-C master alloy
[J]. J. Mater. Sci. Technol., 2017, 33(7): 616-622.
|
[14] |
Du Jun,Shi Yutong,Zhou Mingchuan,Li Wenfang.
Effect of Sr on Grain Refinement of Mg-3%Al Alloy Containing Trace Fe by Carbon-Inoculation
[J]. J. Mater. Sci. Technol., 2016, 32(12): 1297-1302.
|
[15] |
Huan Qiao, Xiangzhen Zhu, Tong Gao, Yuying Wu, Xiangfa Liu.
Influence of Deformation on the Microstructure and Low-temperature Refining Behavior of Al-3.5P Master Alloy
[J]. J. Mater. Sci. Technol., 2015, 31(4): 391-396.
|