Study on Mechanical Property in Steel-Aluminum Solid to Liquid Bonding

J Mater Sci Technol ›› 2003, Vol. 19 ›› Issue (02): 149-151.

• Research Articles • Previous Articles Next Articles

Study on Mechanical Property in Steel-Aluminum Solid to Liquid Bonding

Lizhong ZHANG, Peng ZHANG, Yunhui DU, Daben ZENG, Jianzhong CUI, Limin BA

Department of Mechanical Engineering, Northern Jiaotong University, Beijing 100044, China...

Received:1900-01-01 Revised:1900-01-01 Online:2003-03-28 Published:2009-10-10
Contact: Peng ZHANG

Abstract

Abstract: The bonding of solid steel plate to liquid Al was conducted using rapid solidification. The influence of thickness of Fe-Al compound layer at the interface on interfacial shear strength of bonding plate was studied. The results show that the relationship between thickness of Fe-Al compound layer and interfacial shear strength is S=30.4+8.51 h-0.51 h2+0.007 h3 (where h is thickness of Fe-Al compound layer, S is interfacial shear strength). When thickness of Fe-Al compound layer is 10.7 μm, the largest interfacial shear strength is 71.6 MPa.

Key words: Mechanical property, Rapid solidification, Interface, Interfacial shear strength

Lizhong ZHANG, Peng ZHANG, Yunhui DU, Daben ZENG, Jianzhong CUI, Limin BA. Study on Mechanical Property in Steel-Aluminum Solid to Liquid Bonding[J]. J Mater Sci Technol, 2003, 19(02): 149-151.

[1]	Qianqian Jin, Xiaohong Shao, Shijian Zheng, Yangtao Zhou, Bo Zhang, Xiuliang Ma. Interfacial dislocations dominated lateral growth of long-period stacking ordered phase in Mg alloys [J]. J. Mater. Sci. Technol., 2021, 61(0): 114-118.
[2]	Kaiming Cheng, Jiaxing Sun, Huixia Xu, Jin Wang, Chengwei Zhan, Reza Ghomashchi, Jixue Zhou, Shouqiu Tang, Lijun Zhang, Yong Du. Diffusion growth of ϕ ternary intermetallic compound in the Mg-Al-Zn alloy system: In-situ observation and modeling [J]. J. Mater. Sci. Technol., 2021, 60(0): 222-229.
[3]	H. Niu, H.C. Jiang, M.J. Zhao, L.J. Rong. Effect of interlayer addition on microstructure and mechanical properties of NiTi/stainless steel joint by electron beam welding [J]. J. Mater. Sci. Technol., 2021, 61(0): 16-24.
[4]	Pan Xie, Shucheng Shen, Cuilan Wu, Jianghua Chen. Abnormal orientation relation between fcc and hcp structures revealed in a deformed high manganese steel [J]. J. Mater. Sci. Technol., 2021, 60(0): 156-161.
[5]	Lin Chen, Mingyu Hu, Jun Guo, Xiaoyu Chong, Jing Feng. Mechanical and thermal properties of RETaO₄ (RE = Yb, Lu, Sc) ceramics with monoclinic-prime phase [J]. J. Mater. Sci. Technol., 2020, 52(0): 20-28.
[6]	Ji Zou, Guo-Jun Zhang, Zheng-Yi Fu. In-situ ZrB₂- hBN ceramics with high strength and low elasticity [J]. J. Mater. Sci. Technol., 2020, 48(0): 186-193.
[7]	Zhang Mengmeng, Li Xiaopeng, Zhao Jun, Han Xiaopeng, Zhong Cheng, Hu Wenbin, Deng Yida. Surface/interface engineering of noble-metals and transition metal-based compounds for electrocatalytic applications [J]. J. Mater. Sci. Technol., 2020, 38(0): 221-236.
[8]	S.M. Liang, H.M. Ji, X.W. Li. Thickness-dependent mechanical properties of nacre in Cristaria plicata shell: Critical role of interfaces [J]. J. Mater. Sci. Technol., 2020, 44(0): 1-8.
[9]	Chunjuan Cui, Cong Wang, Pei Wang, Wei Liu, Yuanyuan Lai, Li Deng, Haijun Su. Microstructure and fracture toughness of the Bridgman directionally solidified Fe-Al-Ta eutectic at different solidification rates [J]. J. Mater. Sci. Technol., 2020, 42(0): 63-74.
[10]	B.W. Dong, S.H. Wang, Z.Z. Dong, J.C. Jie, T.M. Wang, T.J. Li. Novel insight into dry sliding behavior of Cu-Pb-Sn in-situ composite with secondary phase in different morphology [J]. J. Mater. Sci. Technol., 2020, 40(0): 158-167.
[11]	Yujuan Li, Yingkang Wei, Xiaotao Luo, Changjiu Li, Ninshu Ma. Correlating particle impact condition with microstructure and properties of the cold-sprayed metallic deposits [J]. J. Mater. Sci. Technol., 2020, 40(0): 185-195.
[12]	Z.C. Luo, H.P. Wang. Primary dendrite growth kinetics and rapid solidification mechanism of highly undercooled Ti-Al alloys [J]. J. Mater. Sci. Technol., 2020, 40(0): 47-53.
[13]	Langlang Zhao, Shitong Wei, Dong Wu, Dianbao Gao, Shanping Lu. δ-ferrite transformation mechanism and its effect on mechanical properties of 316H weld metal [J]. J. Mater. Sci. Technol., 2020, 57(0): 33-42.
[14]	H. Dong, Y.Z. Chen, Z.R. Zhang, G.B. Shan, W.X. Zhang, F. Liu. Mechanisms of eutectic lamellar destabilization upon rapid solidification of an undercooled Ag-39.9 at.% Cu eutectic alloy [J]. J. Mater. Sci. Technol., 2020, 59(0): 173-179.
[15]	Yi Wang, Wenyuan Li, Liang Ma, Wei Li, Xingbo Liu. Degradation of solid oxide electrolysis cells: Phenomena, mechanisms, and emerging mitigation strategies—A review [J]. J. Mater. Sci. Technol., 2020, 55(0): 35-55.

Study on Mechanical Property in Steel-Aluminum Solid to Liquid Bonding

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments