[1] |
Yunsheng Wu, Xuezhi Qin, Changshuai Wang, Lanzhang Zhou.
Microstructural evolution and its influence on the impact toughness of GH984G alloy during long-term thermal exposure
[J]. J. Mater. Sci. Technol., 2021, 60(0): 61-69.
|
[2] |
Jiahao Cheng, Xiaohua Hu, Xin Sun, Anupam Vivek, Glenn Daehn, David Cullen.
Multi-scale characterization and simulation of impact welding between immiscible Mg/steel alloys
[J]. J. Mater. Sci. Technol., 2020, 59(0): 149-163.
|
[3] |
Maryam Jamalian, David P.Field.
Gradient microstructure and enhanced mechanical performance of magnesium alloy by severe impact loading
[J]. J. Mater. Sci. Technol., 2020, 36(0): 45-49.
|
[4] |
Haiwen Luo, Xiaohui Wang, Zhenbao Liu, Zhiyong Yang.
Influence of refined hierarchical martensitic microstructures on yield strength and impact toughness of ultra-high strength stainless steel
[J]. J. Mater. Sci. Technol., 2020, 51(0): 130-136.
|
[5] |
S.H. Lu, D. Wu, R.S. Chen, En-hou Han.
Microstructure and texture optimization by static recrystallization originating from {10-12} extension twins in a Mg-Gd-Y alloy
[J]. J. Mater. Sci. Technol., 2020, 59(0): 44-60.
|
[6] |
Seok Gyu Lee, Bohee Kim, Min Cheol Jo, Kyeong-Min Kim, Junghoon Lee, Jinho Bae, Byeong-Joo Lee, Seok Su Sohn, Sunghak Lee.
Effects of Cr addition on Charpy impact energy in austenitic 0.45C-24Mn-(0,3,6)Cr steels
[J]. J. Mater. Sci. Technol., 2020, 50(0): 21-30.
|
[7] |
Yujuan Li, Yingkang Wei, Xiaotao Luo, Changjiu Li, Ninshu Ma.
Correlating particle impact condition with microstructure and properties of the cold-sprayed metallic deposits
[J]. J. Mater. Sci. Technol., 2020, 40(0): 185-195.
|
[8] |
Zhonghua Jiang, Pei Wang, Dianzhong Li, Yiyi Li.
Effects of rare earth on microstructure and impact toughness of low alloy Cr-Mo-V steels for hydrogenation reactor vessels
[J]. J. Mater. Sci. Technol., 2020, 45(0): 1-14.
|
[9] |
Chaoyun Yang, Yikun Luan, Dianzhong Li, Yiyi Li.
Effects of rare earth elements on inclusions and impact toughness of high-carbon chromium bearing steel
[J]. J. Mater. Sci. Technol., 2019, 35(7): 1298-1308.
|
[10] |
Chao Zhang, Lei Cui, Yongchang Liu, Chenxi Liu, Huijun Li.
Microstructures and mechanical properties of friction stir welds on 9% Cr reduced activation ferritic/martensitic steel
[J]. J. Mater. Sci. Technol., 2018, 34(5): 756-766.
|
[11] |
Jijun Zhang, Diana Est, vez, Yuan-Yun Zhao, Lishan Huo, Chuntao Chang, Xinmin Wang, Run-Wei Li.
Flexural Strength and Weibull Analysis of Bulk Metallic Glasses
[J]. J. Mater. Sci. Technol., 2016, 32(2): 129-133.
|
[12] |
Wang Meng,V. Le Anh,Shi Yang,J. Noelle Daniel,Yoon Hyojung,Zhang Minghao,Shirley Meng Y.,Qiao Yu.
Effects of Angular Fillers on Thermal Runaway of Lithium-Ion Battery
[J]. J. Mater. Sci. Technol., 2016, 32(11): 1117-1121.
|
[13] |
Yusong Pan, Yan Chen, Qianqian Shen.
Flexural Mechanical Properties of Functional Gradient Hydroxyapatite Reinforced Polyetheretherketone Biocomposites
[J]. J. Mater. Sci. Technol., 2016, 32(1): 34-40.
|
[14] |
Dongjie Li, Shanping Lu, Dianzhong Li, Yiyi Li.
Effect of Structural Parameters of Double Shielded TIG Torch on the Fusion Zone Profile for 0Cr13Ni5Mo Martensitic Stainless Steel
[J]. J. Mater. Sci. Technol., 2014, 30(9): 922-927.
|
[15] |
J. Duy, M. Strangwood, C.L. Davis.
Effect of TiN Particles and Grain Size on the Charpy Impact Transition Temperature in Steels
[J]. J. Mater. Sci. Technol., 2012, 28(10): 878-888.
|