[1] J.K.Brimacombe, I.V.Samarasekera and J.E.Lait: Continuous Casting Vol.2, Heat Flow, Solidification, and Crack Formation, Book Grafter Inc., Chelsea, MI, 1984, 1-238. [2] J.K.Brimacombe, P.K.Agarwal, S.Hibbins, B.Prabhaker and L.A.Baptista: Continuous Casting, eds. J.K.Brimacombe, I.V.Samarasekera and J.E.Lait, ISS-AIME, 1984, 2, 109. [3] B.G.Thomas: Proc. 74th Steel Making Conference, ed. The Iron and Steel Society, Warrendale, PA, 1991, 74, 105. [4] K.Sasaki, Y.Sugitani and M.Kawasaki: Tetsu-to-Hagane, 1979, 65, 90. [5] B.Lally, L.Biegler and H.Henein: Metall. Trans. B, 1990, 21B, 761. [6] S.Louhenkilpi, E.Laitinen and R.Nieminen: Metall. Trans. B, 1993, 24B, 685. [7] M.El-Bealy, N.Leskinen and H.Fredriksson: Ironmaking and Steelmaking, 1995, 22, 246. [8] Guanghua WEN, Jinghao CHI and Yunfei HUANG: Research on Iron & Steel, 1997, 98, 3. (in Chinese) [9] C.L.DeBellis and S.E.LeBeau: National Heat Transfer Conf., ed. ASME, New York, NY, 1989, 113, 105. [10] C.Y.Wang and C.Beckermann: Metall. Trans. A, 1993, 24A, 2787. [11] R.A.Hardin, H.F.Shen and C.Beckermann: Modeling of Cast-ing, Welding and Advanced Solidification Process IX, Aachen Germany, 2000, 729. [12] R.A.Hardin and C.Beckermann: National Heat Transfer Conf., ed. ASME, New York, NY, 1997, 9, 9. [13] S.K.Choudhary and D.Mazumdar: ISIJ Int., 1994, 34, 584. [14] M.R.Aboutalebi, M.Hasan and R.I.L.Guthrie: Metall. Mater. Irans. B, 1995, 26B, 731. [15] T.Nozaki: Trans. ISIJ, 1978, 18, 330. [16] L.K.Chiang: Internal Report on Secondary Spray Cooling Sys-tem, 1994, IPSCO Inc., Regina, Sask. [17] M.C.Schneider and C.Beckermann: Metall. Mater. Trans. A, 1995, 26A, 2373. [18] S.V.Patankar: Numerical Heat Transfer and Fluid Flow, McGraw-Hill, New York, 1980, 1-197. [19] R.York and K.H.Spitzer: Solidification Processing 1997-Proc. 4th Decennial International Conference on Solidification Pro-cessing, eds. J.Beech and H.Jones, University of Sheffield, 1997, 163. |