J. Mater. Sci. Technol. ›› 2022, Vol. 107: 136-148.DOI: 10.1016/j.jmst.2021.07.048

• Research Article • Previous Articles     Next Articles

Revealing the decomposition mechanisms of dislocations and metastable α' phase and their effects on mechanical properties in a Ti-6Al-4V alloy

Jinlong Sua, Xiankun Jia,b, Jin Liua, Jie Tenga,*(), Fulin Jianga,*(), Dingfa Fua, Hui Zhanga,*()   

  1. aCollege of Materials Science and Engineering, Hunan University, Changsha 410082, China
    bAECC Hunan Aviation Powerplant Research Institute, Zhuzhou 412002, China

Abstract:

The metastable α' phase and dislocation characteristics (e.g., density and constituents) are of vital importance for the mechanical responses of (α+β) titanium alloys. In this work, to reveal the in-depth decomposition mechanisms of dislocations and metastable α' and their influences on mechanical properties in a Ti-6Al-4V (α+β) alloy, the thermal stability of different microstructures tailored by various cooling approaches were investigated utilizing scanning electron microscope, electron backscattered diffraction, transmission electron microscope and X-ray diffraction line profile analysis. The results showed that the initial characteristics of α' and α laths and dislocation density were influenced by the cooling methods remarkably. The thermal stability of Ti-6Al-4V alloy increased with decreasing cooling rate. The improvement in thermal stability can be ascribed by the decrement in dislocations, partitioning of the alloying elements and grain orientations variation of the α' lath and α phase. It is also found that the plastic strain accommodation of βα' transformation was dominated by <a> dislocations. During stabilization annealing treatments, the <a>, <c> and <c+a> dislocations simultaneously decomposed. The decomposition of dislocations and metastable α' phase during various stabilization annealing and the particular twins and stacking faults microstructures formed during quenching have a great influence on the properties of the studied Ti-6Al-4V alloy.

Key words: Titanium alloy, Heat treatment, Microstructure, Mechanical properties, Dislocation