J. Mater. Sci. Technol. ›› 2022, Vol. 99: 207-214.DOI: 10.1016/j.jmst.2021.05.018
• Research article • Previous Articles Next Articles
Heng Duana, Bin Liua,*(), Ao Fua, Junyang Hea,b, Tao Yangc, C.T. Liuc,d, Yong Liua
Received:
2021-01-04
Revised:
2021-02-20
Accepted:
2021-05-16
Published:
2022-02-10
Online:
2022-02-09
Contact:
Bin Liu
About author:
* E-mail address: binliu@csu.edu.cn (B. Liu).Heng Duan, Bin Liu, Ao Fu, Junyang He, Tao Yang, C.T. Liu, Yong Liu. Segregation enabled outstanding combination of mechanical and corrosion properties in a FeCrNi medium entropy alloy manufactured by selective laser melting[J]. J. Mater. Sci. Technol., 2022, 99: 207-214.
Fig. 3. (a) OM image of the as-SLMed FeCrNi MEA showing the melting pool. (b) EBSD IPF map, (c) image quality (IQ) map superimposed with HAGBs and LAGBs and (e) statistic calculation of the GB, (d) KAM image and (f) KAM statistic image of the as-SLMed FeCrNi MEA (For interpretation of the references to color in this figure legend, the reader is referred to the web version of this article.).
Fig. 4. (a) SEM image showing the morphology of the coarse grains in the as-SLMed FeCrNi MEA. (b) Typical cellular substructures in the grain interior. (c) TEM bright-field image showing the dislocation cells corresponding to the substructures in (b) (For interpretation of the references to color in this figure, the reader is referred to the web version of this article.).
Fig. 6. APT results showing the local chemical information of the as-SLMed FeCrNi MEA: (a) elemental distribution map with a set of C isocomposition surfaces at a threshold value of 1.8 at.%, showing a planar feature enriched in both C and Cr in the check box; (b) front view of this planar feature showing two large C-rich islands (black arrows) embedded in the plane. Linear compositional profiles perpendicular across (c) the planar feature and (d) one of the large C-rich islands (For interpretation of the references to color in this figure legend, the reader is referred to the web version of this article.).
Fig. 7. (a) Tensile engineering stress-strain curves of the as-SLMed FeCrNi MEA as well as the as-cast FeCrNi MEA, as-SLMed FeCoCrNiMn HEA[19] and as-SLMed 316 L [25]. (b) Strength-ductility relationship of the current as-SLMed FeCrNi and various other structural materials [1,19,[26], [27], [28]] (For interpretation of the references to color in this figure, the reader is referred to the web version of this article.).
Fig. 8. (a) Potentiodynamic-polarization curves and (b) Nyquist plots and equivalent electrical circuit for the as-SLMed FeCrNi MEA and 316 L SS in 3.5 wt.% NaCl. (c) High-resolution XPS spectra of the passive film formed on the as-SLMed MEA.
[1] |
D. Herzog, V. Seyda, E. Wycisk, C. Emmelmann, Acta Mater. 117 (2016) 371-392.
DOI URL |
[2] | W.K. Klement, R.H. Willens, P. Duwez, Nature 187 (1960) 869-870. |
[3] |
J.W. Fu, Y.S. Yang, J. Alloy. Compd. 580 (2013) 191-194.
DOI URL |
[4] |
B. Liu, J. Wang, Y. Liu, Q. Fang, Y. Wu, S. Chen, C.T. Liu, Intermetallics 75 (2016) 25-30.
DOI URL |
[5] |
Y. Wang, B. Liu, K. Yan, M. Wang, S. Kabra, Y.L. Chiu, D. Dye, P.D. Lee, Y. Liu, B. Cai, Acta Mater. 154 (2018) 79-89.
DOI URL |
[6] |
P.F. Zhou, D.H. Xiao, Z. Wu, X.Q. Ou, Mater. Sci. Eng. A 739 (2019) 86-89.
DOI URL |
[7] |
K.N. Amato, S.M. Gaytan, L.E. Murr, E. Martinez, P.W. Shindo, J. Hernandez, S. Collins, F. Medina, Acta Mater. 60 (2012) 2229-2239.
DOI URL |
[8] |
T. Pinomaa, M. Lindroos, M. Walbrühl, N. Provatas, A. Laukkanen, Acta Mater. 184 (2020) 1-16.
DOI URL |
[9] |
A. Fu, B. Liu, W. Lu, B. Liu, J. Li, Q. Fang, Z. Li, Y. Liu, Scr. Mater. 186 (2020) 381-386.
DOI URL |
[10] |
B. Chen, S.K. Moon, X. Yao, G. Bi, J. Shen, J. Umeda, K. Kondoh, Scr. Mater. 141 (2017) 45-49.
DOI URL |
[11] |
X. Wang, L.N. Carter, B. Pang, M.M. Attallah, M.H. Loretto, Acta Mater. 128 (2017) 87-95.
DOI URL |
[12] |
Y.M. Wang, T. Voisin, J.T.McKeown , J.Ye, N.P. Calta, Z. Li, Z. Zeng, Y. Zhang, W. Chen, T.T. Roehling, R.T. Ott, M.K. Santala, Philip J. Depond, M.J. Matthews, A.V. Hamza, T. Zhu, Nat. Mater. 17 (2018) 63-71.
DOI URL |
[13] |
K.H. Lo, C.H. Shek, J.K.L. Lai, Mater. Sci. Eng. R 65 (2009) 39-104.
DOI URL |
[14] |
A.I. Shcherbakov, Prot. Met. 41 (2005) 30-35.
DOI URL |
[15] |
T. Sourmail, Mater. Sci. Technol. 17 (2001) 1-14.
DOI URL |
[16] |
Q. Li, T.W. Zhang, J.W. Qiao, S.G. Ma, D. Zhao, P. Lu, Z.H. Wang, J. Alloy. Compd. 816 (2020) 152663.
DOI URL |
[17] | D. Lin, L. Xu, H. Jing, Y. Han, L. Zhao, F. Minami, Addit. Manuf. 32 (2020) 101058. |
[18] | S. Kou, U.S.A., 2003. |
[19] |
Z.G. Zhu, Q.B. Nguyen, F.L. Ng, X.H. An, X.Z. Liao, P.K. Liaw, S.M.L.Nai , J.Wei, Scr. Mater. 154 (2018) 20-24.
DOI URL |
[20] |
L. Li, Z. Li, A. Kwiatkowski da Silva, Z. Peng, H. Zhao, B. Gault, D. Raabe, Acta Mater. 178 (2019) 1-9.
DOI URL |
[21] |
M. Herbig, D. Raabe, Y.J. Li, P. Choi, S. Zaefferer, S. Goto, Phys. Rev. Lett. 112 (2014) 126103.
PMID |
[22] |
H. Zhao, F. De Geuser, A. Kwiatkowski da Silva, A. Szczepaniak, B. Gault, D. Ponge, D. Raabe, Acta Mater. 156 (2018) 318-329.
DOI URL |
[23] |
K.G. Prashanth, J. Eckert, J. Alloy. Compd. 707 (2017) 27-34.
DOI URL |
[24] |
B. Qian, K. Saeidi, L. Kvetková, F. Lofaj, C. Xiao, Z. Shen, Dent. Mater. 31 (2015) 1435-1444.
DOI PMID |
[25] |
C. Qiu, M.A. Kindi, A.S. Aladawi, I.A. Hatmi, Sci. Rep. 8 (2018) 7785.
DOI URL |
[26] |
H. Gong, K. Rafi, H. Gu, G.D. Janaki Ram, T. Starr, B. Stucker, Mater. Des. 86 (2015) 545-554.
DOI URL |
[27] |
Y. Brif, M. Thomas, I. Todd, Scr. Mater. 99 (2015) 93-96.
DOI URL |
[28] | R. Zhou, Y. Liu, C. Zhou, S. Li, W. Wu, M. Song, B. Liu, X. Liang, P.K. Liaw, Inter- metallics 94 (2018) 165-171. |
[29] |
H. Luo, Z. Li, A.M. Mingers, D. Raabe, Corros. Sci. 134 (2018) 131-139.
DOI URL |
[30] |
H. Ashassi-Sorkhabi, D. Seifzadeh, M.G. Hosseini, Corros. Sci. 50 (2008) 3363-3370.
DOI URL |
[31] |
C.S. Pande, K.P. Cooper, Prog. Mater. Sci. 54 (2009) 689-706.
DOI URL |
[32] |
Y. Guo, M. Li, P. Li, C. Chen, Q. Zhan, Y. Chang, Y. Zhang, J. Alloy. Compd. 820 (2020) 153104.
DOI URL |
[33] |
J. He, S.K. Makineni, W. Lu, Y. Shang, Z. Lu, Z. Li, B. Gault, Scr. Mater. 175 (2020) 1-6.
DOI URL |
[34] |
N. Kamikawa, X. Huang, N. Tsuji, N. Hansen, Acta Mater. 57 (2009) 4198-4208.
DOI URL |
[35] |
T. Huang, L. Shuai, A. Wakeel, G. Wu, N. Hansen, X. Huang, Acta Mater. 156 (2018) 369-378.
DOI URL |
[36] |
Y. Guo, Z. Li, J. He, H. Su, L. Jia, J. Zhang, L. Liu, H. Zhang, Mater. Charact. 159 (2020) 110051.
DOI URL |
[37] |
Z. Han, W. Ren, J. Yang, A. Tian, Y. Du, G. Liu, R. Wei, G. Zhang, Y. Chen, J. Alloy. Compd. 816 (2020) 152583.
DOI URL |
[38] |
M. Orłowska, E. Ura-Bińczyk, L. Olejnik, M. Lewandowska, Corros. Sci. 148 (2019) 57-70.
DOI URL |
[39] |
Z.B. Wang, N.R. Tao, W.P. Tong, J. Lu, K. Lu, Acta Mater. 51 (2003) 4319-4329.
DOI URL |
[40] |
Z.B. Wang, J. Lu, K. Lu, Acta Mater. 53 (2005) 2081-2089.
DOI URL |
[41] |
M. Abdulstaar, M. Mhaede, L. Wagner, M. Wollmann, Mater. Des. 57 (2014) 325-329.
DOI URL |
[42] |
M. Zhang, Y. Ma, W. Dong, X. Liu, Y. Lu, Y. Zhang, R. Li, Y. Wang, P. Yu, Y. Gao, Mater. Sci. Eng. A 771 (2020) 138566.
DOI URL |
[43] | H. Gao, Y. Huang, W.D. Nix, J.W. Hutchinson, Theory. J. Mech. Phys. Solids 47 (1999) 1239-1263. |
[44] |
L.P. Kubin, A. Mortensen, Scr. Mater. 48 (2003) 119-125.
DOI URL |
[45] |
W. Xu, X.C. Liu, X.Y. Li, K. Lu, Acta Mater. 182 (2020) 207-214.
DOI URL |
[46] |
J. Chen, Z. Yao, X. Wang, Y. Lu, X. Wang, Y. Liu, X. Fan, Mater. Chem. Phys. 210 (2018) 136-145.
DOI URL |
[47] |
Z. Wang, I. Baker, W. Guo, J.D. Poplawsky, Acta Mater. 126 (2017) 346-360.
DOI URL |
[48] |
J.M. Park, J. Choe, J.G. Kim, J.W. Bae, J. Moon, S. Yang, K.T. Kim, J.H. Yu, H.S. Kim, Mater. Res. Lett. 8 (1) (2020) 1-7.
DOI URL |
[49] |
G.T. Burstein, P.I. Marshall, Corros. Sci. 23 (2) (1983) 125-137.
DOI URL |
[1] | Hanchen Feng, Lei Cai, Linfeng Wang, Xiaodan Zhang, Feng Fang. Microstructure and strength in ultrastrong cold-drawn medium carbon steel [J]. J. Mater. Sci. Technol., 2022, 97(0): 89-100. |
[2] | H.Y. Wan, W.K. Yang, L.Y. Wang, Z.J. Zhou, C.P. Li, G.F. Chen, L.M. Lei, G.P. Zhang. Toward qualification of additively manufactured metal parts: Tensile and fatigue properties of selective laser melted Inconel 718 evaluated using miniature specimens [J]. J. Mater. Sci. Technol., 2022, 97(0): 239-253. |
[3] | Xin Gai, Rui Liu, Yun Bai, Shujun Li, Yang Yang, Shenru Wang, Jianguo Zhang, Wentao Hou, Yulin Hao, Xing Zhang, Rui Yang, R.D.K. Misra. Electrochemical behavior of open-cellular structured Ti-6Al-4V alloy fabricated by electron beam melting in simulated physiological fluid: the significance of pore characteristics [J]. J. Mater. Sci. Technol., 2022, 97(0): 272-282. |
[4] | Wenjie Lu, Kang Yan, Xian Luo, Yuetang Wang, Le Hou, Pengtao Li, Bin Huang, Yanqing Yang. Superb strength and ductility balance of a Co-free medium-entropy alloy with dual heterogeneous structures [J]. J. Mater. Sci. Technol., 2022, 98(0): 197-204. |
[5] | Seyedmohammad Tabaie, Farhad Rézaï-Aria, Bertrand C.D. Flipo, Mohammad Jahazi. Dissimilar linear friction welding of selective laser melted Inconel 718 to forged Ni-based superalloy AD730™: Evolution of strengthening phases [J]. J. Mater. Sci. Technol., 2022, 96(0): 248-261. |
[6] | Chong Yang, Pengming Cheng, Baoan Chen, Jinyu Zhang, Gang Liu, Jun Sun. Solute clusters-promoted strength-ductility synergy in Al-Sc alloy [J]. J. Mater. Sci. Technol., 2022, 96(0): 325-331. |
[7] | Q. Yan, B. Chen, L. Cao, K.Y. Liu, S. Li, L. Jia, K. Kondoh, J.S. Li. Improved mechanical properties in titanium matrix composites reinforced with quasi-continuously networked graphene nanosheets and in-situ formed carbides [J]. J. Mater. Sci. Technol., 2022, 96(0): 85-93. |
[8] | Zhongwu Liu, Jiayi He, Qing Zhou, Youlin Huang, Qingzheng Jiang. Development of non-rare earth grain boundary modification techniques for Nd-Fe-B permanent magnets [J]. J. Mater. Sci. Technol., 2022, 98(0): 51-61. |
[9] | Yu Liao, Junhua Bai, Fuwen Chen, Guanglong Xu, Yuwen Cui. Microstructural strengthening and toughening mechanisms in Fe-containing Ti-6Al-4V: A comparison between homogenization and aging treated states [J]. J. Mater. Sci. Technol., 2022, 99(0): 114-126. |
[10] | Huang Chunping, Liang Renyu, Liu Fenggang, Yang Haiou, Lin Xin. Effect of dimensionless heat input during laser solid forming of high-strength steel [J]. J. Mater. Sci. Technol., 2022, 99(0): 127-137. |
[11] | Tianyi Han, Yong Liu, Mingqing Liao, Danni Yang, Nan Qu, Zhonghong Lai, Jingchuan Zhu. Refined microstructure and enhanced mechanical properties of AlCrFe2Ni2 medium entropy alloy produced via laser remelting [J]. J. Mater. Sci. Technol., 2022, 99(0): 18-27. |
[12] | Wanting Sun, Bo Wu, Hui Fu, Xu-Sheng Yang, Xiaoguang Qiao, Mingyi Zheng, Yang He, Jian Lu, San-Qiang Shi. Combining gradient structure and supersaturated solid solution to achieve superior mechanical properties in WE43 magnesium alloy [J]. J. Mater. Sci. Technol., 2022, 99(0): 223-238. |
[13] | Zifan Hao, Guoliang Xie, Xinhua Liu, Qing Tan, Rui Wang. The precipitation behaviours and strengthening mechanism of a Cu-0.4 wt% Sc alloy [J]. J. Mater. Sci. Technol., 2022, 98(0): 1-13. |
[14] | Tao Zheng, Xiaobing Hu, Feng He, Qingfeng Wu, Bin Han, Chen Da, Junjie Li, Zhijun Wang, Jincheng Wang, Ji-jung Kai, Zhenhai Xia, C.T. Liu. Tailoring nanoprecipitates for ultra-strong high-entropy alloys via machine learning and prestrain aging [J]. J. Mater. Sci. Technol., 2021, 69(0): 156-167. |
[15] | Byungchul Kang, Taeyeong Kong, Ho Jin Ryu, Soon Hyung Hong. Superior mechanical properties and strengthening mechanisms of lightweight AlxCrNbVMo refractory high-entropy alloys (x = 0, 0.5, 1.0) fabricated by the powder metallurgy process [J]. J. Mater. Sci. Technol., 2021, 69(0): 32-41. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||