J. Mater. Sci. Technol. ›› 2021, Vol. 67: 95-104.DOI: 10.1016/j.jmst.2020.06.025
• Research article • Previous Articles Next Articles
Yuting Wua, Chong Lia,*(), Xingchuan Xiab, Hongyan Lianga, Qiqi Qia, Yongchang Liua,*()
Received:
2020-03-22
Revised:
2020-05-23
Accepted:
2020-06-02
Published:
2021-03-20
Online:
2021-04-15
Contact:
Chong Li,Yongchang Liu
About author:
ycliu@tju.edu.cn (Y. Liu).Yuting Wu, Chong Li, Xingchuan Xia, Hongyan Liang, Qiqi Qi, Yongchang Liu. Precipitate coarsening and its effects on the hot deformation behavior of the recently developed γ'-strengthened superalloys[J]. J. Mater. Sci. Technol., 2021, 67: 95-104.
Alloy | Al | Cr | Mo | Zr | W | Ti | Fe | Hf | B | C | Ni |
---|---|---|---|---|---|---|---|---|---|---|---|
IC-50 | 11.30 | - | - | 0.60 | - | - | - | - | 0.02 | - | Bal. |
IC-221 | 8.50 | 7.80 | - | 1.70 | - | - | - | - | 0.02 | - | Bal. |
IC-396 | 7.98 | 7.72 | 3.02 | 0.83 | - | - | - | - | 0.005 | - | Bal. |
IC-396LZr | 7.98 | 7.72 | 3.02 | 0.20 | - | - | - | - | 0.005 | - | Bal. |
IC6 | 7.5-8.5 | - | 10-14 | - | - | - | - | - | ≤0.15 | - | Bal. |
VKNA-1V | 8.83 | 5.58 | 3.50 | 0.45 | 2.82 | 1.54 | - | - | - | 0.03 | Bal. |
MX246 | 7.0-8.5 | 7.4-8.2 | - | 0.3-0.8 | - | 0.6-1.2 | ≤2.0 | - | 0.01-0.05 | 0.06-1.16 | Bal. |
MX246A | 7.6-8.5 | 7.4-8.2 | 3.5-4.5 | - | 1.7-2.3 | 0.6-1.2 | ≤2.0 | 0.2-0.6 | 0.01-0.05 | 0.06-0.2 | Bal. |
Table 1 Chemical compositions of some typical Ni3Al-based alloys for commercial applications [19,27,28].
Alloy | Al | Cr | Mo | Zr | W | Ti | Fe | Hf | B | C | Ni |
---|---|---|---|---|---|---|---|---|---|---|---|
IC-50 | 11.30 | - | - | 0.60 | - | - | - | - | 0.02 | - | Bal. |
IC-221 | 8.50 | 7.80 | - | 1.70 | - | - | - | - | 0.02 | - | Bal. |
IC-396 | 7.98 | 7.72 | 3.02 | 0.83 | - | - | - | - | 0.005 | - | Bal. |
IC-396LZr | 7.98 | 7.72 | 3.02 | 0.20 | - | - | - | - | 0.005 | - | Bal. |
IC6 | 7.5-8.5 | - | 10-14 | - | - | - | - | - | ≤0.15 | - | Bal. |
VKNA-1V | 8.83 | 5.58 | 3.50 | 0.45 | 2.82 | 1.54 | - | - | - | 0.03 | Bal. |
MX246 | 7.0-8.5 | 7.4-8.2 | - | 0.3-0.8 | - | 0.6-1.2 | ≤2.0 | - | 0.01-0.05 | 0.06-1.16 | Bal. |
MX246A | 7.6-8.5 | 7.4-8.2 | 3.5-4.5 | - | 1.7-2.3 | 0.6-1.2 | ≤2.0 | 0.2-0.6 | 0.01-0.05 | 0.06-0.2 | Bal. |
Alloy | Cr | Fe | Al | Ti | Mo | W | Co | Nb | C | P | B | Ni |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Waspaloy | 19.4 | - | 1.3 | 3.0 | 4.25 | - | 13.25 | - | 0.035 | 0.006 | 0.006 | Bal. |
IN718 | 18.1 | 18 | 0.45 | 1.0 | 2.8 | - | - | 5.4 | 0.025 | 0.007 | 0.004 | Bal. |
718Plus | 18.0 | 10 | 1.45 | 0.7 | 2.75 | 1 | 9 | 5.45 | 0.02 | 0.014 | 0.004 | Bal. |
Table 2 A comparison in the chemical composition of Waspaloy alloy, 718 alloy and 718Plus alloy [18].
Alloy | Cr | Fe | Al | Ti | Mo | W | Co | Nb | C | P | B | Ni |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Waspaloy | 19.4 | - | 1.3 | 3.0 | 4.25 | - | 13.25 | - | 0.035 | 0.006 | 0.006 | Bal. |
IN718 | 18.1 | 18 | 0.45 | 1.0 | 2.8 | - | - | 5.4 | 0.025 | 0.007 | 0.004 | Bal. |
718Plus | 18.0 | 10 | 1.45 | 0.7 | 2.75 | 1 | 9 | 5.45 | 0.02 | 0.014 | 0.004 | Bal. |
Fig. 5. The microstructures of 718Plus alloy supplied in the form of a forged gas turbine disc: (a) SEM image indicating η phase and carbides; (b) TEM image.
Fig. 9. The TEM dark-field micrographs of 718Plus superalloy after (a) solution annealing at 980 °C for 30 min and (b) aging at 788 °C for 4 h, adapted from Ref. [42].
Fig. 11. (a) The processing map of a Ni3Al-based alloy at a strain of 0.8 and (b-f) the deformed microstructures which correspond to the different domains indicated by red arrows in the processing map, adapted from Ref. [29].
Fig. 12. TEM micrographs of the Ni3Al-based alloy with different initial microstructure: (a) fine cuboidal γ′ precipitates; (b) coarse strip-like γ′ precipitates.
Fig. 13. The flow curves and deformed microstructures of the studied alloys with different initial microstructures deformed at various conditions, in which dot lines and solid lines represent the studied alloy with fine cuboidal γ′ precipitates and coarse strip-like γ′ precipitates, respectively.
[1] | J. Luo, W. Yu, C. Xia, C. Zhang, C. Ma, J. Alloys. Compd. 777(2019) 157-164 (in Chinese). |
[2] | H. Long, S. Mao, Y. Liu, Z. Zhang, X. Han, J. Alloys. Compd. 743(2018) 203-220 (in Chinese). |
[3] | Y. Liu, H. Zhang, Q. Guo, X. Zhou, Z. Ma, Y. Huang, H. Li, Acta Metall. Sin. 54(2018) 1653-1664 (in Chinese). |
[4] | T. Liu, J.S. Dong, L. Wang, Z.J. Li, X.T. Zhou, L.H. Lou, J. Zhang, J. Mater. Sci.Technol. 31(2015) 269-279. |
[5] | H.P. Wang, P. Lü, X. Cai, B. Zhai, B. Wei, Mater. Sci. Eng. A 772 (2020), 138660. |
[6] | J. Li, H. Xie, M. Han, S. Liu, Acta Metall. Sin. 55(2019) 1195-1203 (in Chinese). |
[7] | S.L. Semiatin, S.L. Kim, F. Zhang, J.S. Tiley, Metall. Mater. Trans. A 46 (2015) 1715-1730. |
[8] | D. Raynor, J.M. Silcock, Methods Cell Sci. 4(1970) 121-130. |
[9] | J.M. Oblak, D.F. Paulonis, D.S. Duvall, Metall. Trans. 5(1974) 143-153. |
[10] | X. Zhang, H. Li, M. Zhan, Z. Zheng, J. Gao, G. Shao, J. Mater. Sci.Technol. 36(2020) 79-83. |
[11] | H. Zhang, C. Li, Y. Liu, Q. Guo, Y. Huang, H. Li, J. Yu, J. Alloys. Compd. 716(2017) 65-72. |
[12] | R. Smallman, A. Ngan, Physical Metallurgy and Advanced MaterialsEngineering, in: Physical Metallurgy & Advanced Materials, 7th ed., 2007. |
[13] | M. Hoelzel, D.D. Genovese, R. Gilles, D. Mukherji, D.M. Toebbens, J. Roesler H. Fuess, Phys. B 385-386(2006) 594-596. |
[14] | R.C. Reed, The Superalloys: Fundamentals and Applications, CambridgeUniversity Press, Cambridge, 2008. |
[15] | T.B. Gibbons, Adv. Mater. 2(1990) 583-588. |
[16] | W. Betteridge, S.W.K. Shaw, Mater. Sci. Technol. 3(1987) 682-694. |
[17] | L. Li, J. Mater. Sci. 41(2006) 7886-7893. |
[18] | W. Cao, R. Kennedy, TMS, 2004, pp. 91-99. |
[19] | P. Jozwik, W. Polkowski, Z. Bojar, Materials 8 (2015) 2537-2568. |
[20] | J. Wu, Y.C. Liu, C. Li, Y.T. Wu, X.C. Xia, H.J. Li, Acta Metall. Sin. 56(2020) 21-35(in Chinese). |
[21] | H. Zhang, C. Li, Z. Ma, L. Yu, H. Li, Y. Liu, Int. J. Min. Met. Mater. 25(2018) 1191-1200. |
[22] | Y. Huang, Y. Liu, C. Li, Z. Ma, L. Yu, H. Li, Vacuum 161 (2019) 209-219. |
[23] | Y. Zhang, Y. Liu, Y. Han, C. Wei, Z. Gao, J. Alloys. Compd. 473(2009) 442-445. |
[24] | Y. Li, C. Li, Y. Wu, J. Wu, Z. Ma, H. Li, Y. Liu, Vacuum 171 (2020), 109038. |
[25] | Y. Li, C. Li, L. Yu, Z. Ma, H. Li, Y. Liu, Vacuum 176 (2020), 109310. |
[26] | K. Aoki, O. Izumi, Trans. Jpn. Inst. Met. 19(1978) 203-210. |
[27] | Y.F. Han, S.H. Li, M.C. Chaturvedi, Mater. Sci. Eng. A 160 (1993) 271-279. |
[28] | X.E. Zhang, H.L. Luo, S.P. Li, X. Cao, S.Q. Li, J. Iron Steel Res. Int. 14(2007) 45-52. |
[29] | Y. Wu, Y. Liu, C. Li, X. Xia, Y. Huang, H. Li, H. Wang, J. Alloys. Compd. 712(2017) 687-695. |
[30] | J. Lapin, J. Mareček, Intermetallics 14 (2006) 1339-1344. |
[31] | J. Wu, C. Li, Y. Liu, X. Xia, Y. Wu, Z. Ma, H. Wang, Intermetallics 109 (2019) 48-59. |
[32] | M. Florian, Kovové Materiály 41 (2003) 49-55. |
[33] |
C.T. Liu, J.O. Stiegler, Science 226 (1984) 636-642.
DOI URL PMID |
[34] | W. Li, H. Li, L. Liu, Y. Pei, Y. Ma, S. Li, S. Gong, Mater. Res. Innov. 18(2014) 380-384. |
[35] | M. Azarbarmas, M. Aghaie-Khafri, J.M. Cabrera, J. Calvo, Mater. Sci. Eng. A 678(2016) 137-152. |
[36] | J. Zhang, Q. Guo, Y. Liu, C. Li, L. Yu, H. Li, Int. J. Min. Met. Mater. 23(2016) 1087-1096. |
[37] | H.P. Wang, C.H. Zheng, P.F. Zou, S.J. Yang, L. Hu, B. Wei, J. Mater. Sci. Technol. 34(2018) 436-439. |
[38] | W. Cao, in: E.A. Loria (Ed.), Superalloys 718, 625, 706 and Derivatives, TMS, 2005, pp. 166-177. |
[39] | K. Vishwakarma, N. Richards, M. Chaturvedi, Mater. Sci. Eng. A 480 (2008) 517-528. |
[40] | C. Sommitsch, D. Huber, F. Ingelman-Sundberg, S. Mitsche, M. Stockinger, B. Buchmayr, Int. J. Mater. Res. 100(2009) 1088-1098. |
[41] | L. Whitmore, M.R. Ahmadi, L. Guetaz, H. Leitner, E. Povoden-Karadeniz, M. Stockinger, E. Kozeschnik, Mater. Sci. Eng. A 610 (2014) 39-45. |
[42] | L. Whitmore, M.R. Ahmadi, M. Stockinger, E. Povoden-Karadeniz, E. Kozeschnik, H. Leitner, Mater. Sci. Eng. A 594 (2014) 253-259. |
[43] | L. Whitmore, H. Leitner, E. Povoden-Karadeniz, R. Radis, M. Stockinger, Mater.Sci. Eng. A 534 (2012) 413-423. |
[44] | G.A. Zickler, R. Radis, R. Schnitzer, E. Kozeschnik, M. Stockinger, H. Leitner, Adv. Eng. Mater. 12(2010) 176-183. |
[45] | B. Hassan, J. Corney, Mater. Sci. Technol. 33(2017) 1879-1889. |
[46] | A. Ges, O. Fornaro, H. Palacio, J. Mater. Sci. 32(1997) 3687-3691. |
[47] | A.M. Ges, O. Fornaro, H.A. Palacio, Mater. Sci. Eng. A 458 (2007) 96-100. |
[48] | J. Kundin, L. Mushongera, T. Goehler, H. Emmerich, Acta Mater. 60(2012) 3758-3772. |
[49] | F. Masoumi, M. Jahazi, D. Shahriari, J. Cormier, J. Alloys. Compd. 658(2016) 981-995. |
[50] | J. Tiley, G.B. Viswanathan, R. Srinivasan, R. Banerjee, D.M. Dimiduk, H.L.Fraser, Acta Mater. 57(2009) 2538-2549. |
[51] | A. Baldan, J. Mater. Sci. 37(2002) 2171-2202. |
[52] | A. Baldan, J. Mater. Sci. 37(2002) 2379-2405. |
[53] | Y. Pang, Y. Li, X. Wu, W. Liu, Z. Hou, Int. J. Mater. Res. 106(2014) 108-113. |
[54] | A. Ardell, R.B. Nicholson, Acta Metall. 14(1966) 1295-1309. |
[55] | L. Duan, Y. Liu, Acta Metall. Sin. 56(2020) 112-118 (in Chinese). |
[56] | S.J. Yeom, D.Y. Yoon, M.F. Henry, Metall. Trans. A 24 (1993) 1975-1982. |
[57] | C.K. Sudbrack, T.D. Ziebell, R.D. Noebe, D.N. Seidman, Acta Mater. 56(2008) 448-463. |
[58] | M. Fährmann, P. Fratzl, O. Paris, E. Fährmann, W.C. Johnson, Acta Metall.Mater. 43(1995) 1007-1022. |
[59] | T. Wang, G. Sheng, Z.K. Liu, L.Q. Chen, Acta Mater. 56(2008) 5544-5551. |
[60] | Y. Qiu, J. Alloys. Compd. 270(1998) 145-153. |
[61] | A.M. Jokisaari, S.S. Naghavi, C. Wolverton, P.W. Voorhees, O.G. Heinonen, ActaMater. 141(2017) 273-284. |
[62] | R.N. Wright, J.R. Knibloe, Acta Metall. Mater. 38(1990) 1993-2001. |
[63] | J. Lapin, Intermetallics 5 (1997) 615-624. |
[64] | D. Lee, J. Alloys. Compd. 480(2009) 347-350. |
[65] | M. Li, J. Song, S. Li, Y. Han, Rare Met. Mater. Eng. 30(2011) 345-348. |
[66] | Y. Wu, Y. Liu, C. Li, X. Xia, J. Wu, H. Li, J. Alloys. Compd. 771(2019) 526-533. |
[67] | X. Xie, G. Wang, J. Dong, C. Xu, W. Cao, R. Kennedy, in: E.A. Loria (Ed.),Superalloys 718, 625, 706 and Derivatives, TMS, 2005, pp. 179-191. |
[68] | R. Kearsey, J. Tsang, S. Oppenheimer, E. McDevitt, JOM 64 (2012) 241-251. |
[69] | K. Löhnert, F. Pyczak in: 7th International Symposium on Superalloy 718 andDerivatives, 2010, pp. 877-891. |
[70] | Y.Y. Qiu, Acta Mater. 44(1996) 4969-4980. |
[71] | J.Z. Zhu, T. Wang, A.J. Ardell, S.H. Zhou, Z.K. Liu, L.Q. Chen, Acta Mater. 52(2004) 2837-2845. |
[72] | T. Maebashi, M. Doi, Mater. Sci. Eng. A 373 (2004) 72-79. |
[73] | M. Lifshitz, V.V. Slyozov, J. Phys. Chem. Solids 19 (1961) 35-50. |
[74] | C. Wagner, Zeitschrift für Elektrochemie 65 (1961) 581-591. |
[75] | A. Ardell, Acta Metall. 20(1972) 61-71. |
[76] | K.L. Davies, P. Nash, R.N. Stevens, Acta Metall. 28(1980) 179-189. |
[77] |
A.J. Ardell, V. Ozolins, Nat. Mater. 4(2005) 309-316.
DOI URL PMID |
[78] | C.G. Garay-Reyes, F. Hernández-Santiago, N. Cayetano-Castro, V.M. López-Hirata, J. García-Rocha, J.L. Hernández-Rivera, H.J. Dorantes-Rosales, J.J. Cruz-Rivera, Mater. Charact. 83(2013) 35-42. |
[79] | C. Garay-Reyes, S.E. Hernández-Martínez, J.L. Hernández-Rivera, J.J. Cruz-Rivera, E.J. Gutiérrez-Casta˜neda, H.J. Dorantes-Rosales, J. Aguilar-Santillan, R. Martínez-Sánchez, Met. Mater. Int. 23(2017) 298-307. |
[80] | H.B. Motejadded, M. Soltanieh, S. Rastegari, J. Mater. Sci.Technol. 28(2012) 221-228. |
[81] | C. Ai, M.Q. Ou, X.B. Zhao, Y.L. Pei, H. Zhang, L. Liu, S.S. Li, S.K. Gong, Mater. Res.Innov. 19(2015) 209-213. |
[82] | G.A. Zickler, R. Schnitzer, R. Radis, R. Hochfellner, R. Schweins, M. Stockinger, H. Leitner, Mater. Sci. Eng. A 523 (2009) 295-303. |
[83] | H. Calderon, P.W. Voorhees, J. Murray, G. Kostorz, Acta Metall. Mater. 42(1994) 991-1000. |
[84] | B. Wang, F. Zhang, W. Cao, S. Chen, S. Kou, Metall. Mater. Trans. A 46 (2015) 115-122. |
[85] | Y.C. Lin, X.Y. Wu, X.M. Chen, J. Chen, D.X. Wen, J.L. Zhang, L.T. Li, J. Alloys.Compd. 640(2015) 101-113. |
[86] | J. Qu, X. Xie, Z. Bi, J. Du, M. Zhang, J. Alloys. Compd. 785(2019) 918-924. |
[87] | D.X. Wen, Y.C. Lin, X.H. Li, S.K. Singh, J. Alloys. Compd. 764(2018) 1008-1020. |
[88] | V. Sikka, J. Mavity, K. Anderson, Mater. Sci. Eng. A 153 (1992) 712-721. |
[89] | Y. Prasad. J. Mater. Eng. Perform. 12(2003) 638-645. |
[90] | Y. Prasad, K. Rao, S. Sasidhar, Hot Working Guide: A Compendium ofProcessing Maps, ASM international, 2015. |
[91] | Y. Zhou, Y. Liu, X. Zhou, C. Liu, J. Yu, Y. Huang, H. Li, W. Li, J. Mater. Sci. Technol. 33(2017) 1448-1456. |
[92] | H. Zhang, K. Zhang, L. Zhen, C. Zhao, X. Yang, Mater. Sci. Eng. A 604 (2014) 1-8. |
[93] | Y. Prasad, S. Sasidhara, V. Sikka, Intermetallics 8 (2000) 987-995. |
[94] | J. Wang, W. Han, H. Luo, S. Li, J. Iron Steel Res. 26(2014) 57-62. |
[95] | D. Huber, C. Stotter, C. Sommitsch, S. Mitsche, P. Pölt, B. Buchmayr M. Stockinger, in: 11th International Symposium on Superalloys, TMS, 2008, pp. 855-861. |
[96] | U. Ozturk, J.M. Cabrera, J. Calvo, J. Eng. Gas Turb. Power. 139(2017), 032101. |
[97] | Y. Sun, W. Sun, S. Guo, Z. Hu, Trans. Mater. Heat Treat. 34(2013) 50-54. |
[98] | C. Zhang, L. Zhang, M. Li, W. Shen, S. Gu, J. Mater. Res. 29(2014) 2799-2808. |
[99] | Y. Wu, Y. Liu, C. Li, X. Xia, J. Wu, H. Li, Intermetallics 113 (2019), 106584. |
[1] | Xuewei Yan, Qingyan Xu, Guoqiang Tian, Quanwei Liu, Junxing Hou, Baicheng Liu. Multi-scale modeling of liquid-metal cooling directional solidification and solidification behavior of nickel-based superalloy casting [J]. J. Mater. Sci. Technol., 2021, 67(0): 36-49. |
[2] | Haoze Li, Ming Gao, Min Li, Yingche Ma, Kui Liu. Microstructural evolution and tensile property of 1Cr15Ni36W3Ti superalloy during thermal exposure [J]. J. Mater. Sci. Technol., 2021, 73(0): 193-204. |
[3] | Yi Yang, Di Xu, Sheng Cao, Songquan Wu, Zhengwang Zhu, Hao Wang, Lei Li, Shewei Xin, Lei Qu, Aijun Huang. Effect of strain rate and temperature on the deformation behavior in a Ti-23.1Nb-2.0Zr-1.0O titanium alloy [J]. J. Mater. Sci. Technol., 2021, 73(0): 52-60. |
[4] | Qingkai Shen, Xiangdong Kong, Xizhang Chen. Fabrication of bulk Al-Co-Cr-Fe-Ni high-entropy alloy using combined cable wire arc additive manufacturing (CCW-AAM): Microstructure and mechanical properties [J]. J. Mater. Sci. Technol., 2021, 74(0): 136-142. |
[5] | Md. R.U. Ahsan, Xuesong Fan, Gi-Jeong Seo, Changwook Ji, Mark Noakes, Andrzej Nycz, Peter K. Liaw, Duck Bong Kim. Microstructures and mechanical behavior of the bimetallic additively-manufactured structure (BAMS) of austenitic stainless steel and Inconel 625 [J]. J. Mater. Sci. Technol., 2021, 74(0): 176-188. |
[6] | Yinbao Tian, Junqi Shen, Shengsun Hu, Jian Gou, Yan Cui. Effects of cold metal transfer mode on the reaction layer of wire and arc additive-manufactured Ti-6Al-4V/Al-6.25Cu dissimilar alloys [J]. J. Mater. Sci. Technol., 2021, 74(0): 35-45. |
[7] | Enkang Hao, Yulong An, Jie Chen, Xiaoqin Zhao, Guoliang Hou, Jianmin Chen, Meizhen Gao, Fengyuan Yan. In-situ formation of layer-like Ag2MoO4 induced by high-temperature oxidation and its effect on the self-lubricating properties of NiCoCrAlYTa/Ag/Mo coatings [J]. J. Mater. Sci. Technol., 2021, 75(0): 164-173. |
[8] | Jiang Yang, Honggang Dong, Yueqing Xia, Peng Li, Xiaohu Hao, Yaqiang Wang, Wei Wu, Baosen Wang. Carbide precipitates and mechanical properties of medium Mn steel joint with metal inert gas welding [J]. J. Mater. Sci. Technol., 2021, 75(0): 48-58. |
[9] | Peng Peng, Anqiao Zhang, Jinmian Yue, Xudong Zhang, Yuanli Xu. Macrosegregation and thermosolutal convection-induced freckle formation in dendritic mushy zone of directionally solidified Sn-Ni peritectic alloy [J]. J. Mater. Sci. Technol., 2021, 75(0): 21-26. |
[10] | Xinkai Ma, Zhuo Chen, Dongling Zhong, S.N. Luo, Lei Xiao, Wenjie Lu, Shanglin Zhang. Effect of rotationally accelerated shot peening on the microstructure and mechanical behavior of a metastable β titanium alloy [J]. J. Mater. Sci. Technol., 2021, 75(0): 27-38. |
[11] | Jiachen Zhang, Taiwen Huang, Kaili Cao, Jia Chen, Huajing Zong, Dong Wang, Jian Zhang, Jun Zhang, Lin Liu. A correlative multidimensional study of γ′ precipitates with Ta addition in Re-containing Ni-based single crystal superalloys [J]. J. Mater. Sci. Technol., 2021, 75(0): 68-77. |
[12] | Yang Wang, Shun Zhang, Ruizhi Wu, Nodir Turakhodjaev, Legan Hou, Jinghuai Zhang, Sergey Betsofen. Coarsening kinetics and strengthening mechanisms of core-shell nanoscale precipitates in Al-Li-Yb-Er-Sc-Zr alloy [J]. J. Mater. Sci. Technol., 2021, 61(0): 197-203. |
[13] | Yanxin Qiao, Daokui Xu, Shuo Wang, Yingjie Ma, Jian Chen, Yuxin Wang, Huiling Zhou. Effect of hydrogen charging on microstructural evolution and corrosion behavior of Ti-4Al-2V-1Mo-1Fe alloy [J]. J. Mater. Sci. Technol., 2021, 60(0): 168-176. |
[14] | Huajing Xiong, Jianan Fu, Jinyao Li, Rashad Ali, Hong Wang, Yifan Liu, Hua Su, Yuanxun Li, Woon-Ming Lau, Nasir Mahmood, Chunhong Mu, Xian Jian. Strain-regulated sensing properties of α-Fe2O3 nano-cylinders with atomic carbon layers for ethanol detection [J]. J. Mater. Sci. Technol., 2021, 68(0): 132-139. |
[15] | Xiong-jie Gu, Wei-li Cheng, Shi-ming Cheng, Yan-hui Liu, Zhi-feng Wang, Hui Yu, Ze-qin Cui, Li-fei Wang, Hong-xia Wang. Tailoring the microstructure and improving the discharge properties of dilute Mg-Sn-Mn-Ca alloy as anode for Mg-air battery through homogenization prior to extrusion [J]. J. Mater. Sci. Technol., 2021, 60(0): 77-89. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||