Geometrical Scale-Sensitive Fatigue Properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloys With α/β Lamellar Microstructures

doi:10.1016/j.jmst.2014.07.012

J. Mater. Sci. Technol. ›› 2014, Vol. 30 ›› Issue (12): 1284-1288.DOI: 10.1016/j.jmst.2014.07.012

• Orginal Article • Previous Articles Next Articles

Geometrical Scale-Sensitive Fatigue Properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloys With α/β Lamellar Microstructures

B. Zhang¹, Z.M. Song², L.M. Lei³, L. Kang^{1, 2}, G.P. Zhang²

1、Key Laboratory for Anisotropy and Texture of Materials, Ministry of Education, Northeastern University, Shenyang 110819, China ; 2、Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China; 3、AVIC Commercial Aircraft Engine Co., Ltd., Shanghai 200241, China

Received:2014-02-16 Revised:2014-04-04 Online:2014-12-20 Published:2015-07-23
Supported by:
This work was supported by the National Natural Science Foundation of China (No. 51071158) and partially supported by the National Natural Science Foundation of China (Nos. 51171045 and 51371047), and the National Basic Research Program of China (No. 2010CB631003).

Abstract

Abstract: Fatigue properties of the Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy sheets containing different numbers of α/β Widmanstätten colonies in the thickness direction of the sheets were investigated by tension-tension fatigue testing. It is found that fatigue properties of the Ti alloy either in low- or high-stress amplitude regimes become more sensitive to the sheet thickness of the Ti alloy as the sheet thickness is comparable to the length scale of the Widmanstätten colonies. The basic mechanism of such length scale-sensitive fatigue properties in the Ti alloy was elucidated.

Key words: Fatigue, Ti alloy, Microstructure, Size effect

B. Zhang, Z.M. Song, L.M. Lei, L. Kang, G.P. Zhang. Geometrical Scale-Sensitive Fatigue Properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloys With α/β Lamellar Microstructures[J]. J. Mater. Sci. Technol., 2014, 30(12): 1284-1288.

References

[1] C. Leyens, M. Peters, in: C. Leyens, M. Peters (Eds.), Titanium and Titanium Alloys: Fundamentals and Applications, Wiley-VCH GmbH & Co. KGaA, Weinheim, Germany, 2003.
[2] G. Schroeder, J. Albrecht, G. Luetjering, Mater. Sci. Eng. A 319e
321 (2001) 602e606.
[3] F. Sansoz, H. Ghonem, Mater. Sci. Eng. A 356 (2003) 81e92.
[4] A.L. Pilchak, R.E.A. Williams, J.C. Williams, Metall. Mater. Trans. A 41 (2009) 106e124.
[5] Z.M. Song, L.M. Lei, B. Zhang, X. Huang, G.P. Zhang, J. Mater. Sci. Technol. 28 (2012) 616e628.
[6] M. Niinomi, D. Eylon, in: International Symposium on Fatigue Behavior of Titanium Alloys at the 1998 TMS Fall Meeting, 1999, pp. 315e321.
[7] S.M. Spearing, Acta Mater. 48 (2000) 179e196.
[8] G.P. Zhang, Z.G. Wang, Acta Metall. Sin. 41 (2005) 1e8 (in Chinese).
[9] V. Sinha, W.O. Soboyejo, Mater. Sci. Eng. A 319 (2001) 607e612.
[10] A.L. Pilchak, R.E.A. Williams, J.C. Williams, Metall. Mater. Trans. A 41 (2010) 106e124.
[11] F. Bridier, P. Villechaise, J. Mendez, Acta Mater. 56 (2008) 3951e 3962.
[12] I. Bantounas, D. Dye, T.C. Lindley, Acta Mater. 57 (2009) 3584e 3595.
[13] S. Yonezawa, T. Narushima, K. Ueda, H. Kimura, C. Ouchi, Y. Iguchi, Mater. Trans. 50 (2009) 1713e1719.
[14] J. Oh, J.G. Lee, N.J. Kim, S. Lee, E.W. Lee, J. Mater. Sci. 39 (2004) 587e591.
[15] S.J. Li, L.E. Murr, X.Y. Cheng, Z.B. Zhang, Y.L. Hao, R. Yang, F. Medina, R.B. Wicker, Acta Mater. 60 (2012) 793e802.
[16] R. Hofbeck, K. Hausmann, B. Ilschner, H.U. Kunzi, Scripta Metall. 20 (1986) 1601e1605.
[17] C. Schopf, M. Schamel, H.P. Strunk, G. Richter, Adv. Eng. Mater. 14 (2012) 975e980.
[18] M. Judelewicz, H.U. Kunzi, N. Merk, B. Ilschner, Mater. Sci. Eng. A 186 (1994) 135e142.
[19] D.T. Read, Inter. J. Fatigue 20 (1998) 203e209.
[20] H.D. Merchant, M.G. Minor, Y.L. Liu, J. Electron. Mater. 28 (1999) 998e1007.
[21] A. Hadrboletz, B. Weiss, G. Khatibi, Int. J. Fatigue 109 (2001) 69e 89.
[22] B. Weiss, V. Groger, G. Khatibi, A. Kotas, P. Zimprich, R. Stickler, B. Zagar, Sens. Actuator A Phys. 99 (2002) 172e182.
[23] T.P. Halford, K. Takashima, Y. Higo, MRS Proc. 842 (2004), in: http://dx.doi.org/10.1557/PROC-842-S6.9.
[24] G.P. Zhang, K. Takashima, Y. Higo, Mater. Sci. Eng. A 426 (2006) 95e100.
[25] K. Sieradzki, A. Rinaldi, C. Friesen, P. Peralta, Acta Mater. 54 (2006) 4533e4538.
[26] C.Y. Dai, G.P. Zhang, C. Yan, Philos. Mag. 91 (2011) 932e945.
[27] C.Y. Dai, B. Zhang, J. Xu, G.P. Zhang, Mater. Sci. Eng. A 575 (2013) 217e222.
[28] G. Khatibi, A. Betzwar-Kotas, V. Groger, B. Weiss, Fatigue Fract. Eng. Mater. Struct. 28 (2005) 723e733.
[29] G.P. Zhang, Z.G. Wang, Fatigue of Small-Scale Metal Materials: From Micro- to Nano-Scale, in: G.C. Sih (Ed.), Multiscale Fatigue Crack Initiation and Propagation of Engineering Materials: Structural Integrity and Micro-Structural Worthiness, Springer, United Kingdom, 2008, pp. 275e326.
[30] G.P. Zhang, C.A. Volkert, R. Schwaiger, R. Monig, O. Kraft, Microelectron. Reliab. 47 (2007) 2007e2013.
[31] S. Hong, R. Weil, Thin Solid Films 283 (1996) 175e181.
[32] S. Suresh, Fatigue of Materials, Cambridge University, Cambridge, 2003.

Geometrical Scale-Sensitive Fatigue Properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloys With α/β Lamellar Microstructures

RichHTML

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Xiong-jie Gu, Wei-li Cheng, Shi-ming Cheng, Yan-hui Liu, Zhi-feng Wang, Hui Yu, Ze-qin Cui, Li-fei Wang, Hong-xia Wang. Tailoring the microstructure and improving the discharge properties of dilute Mg-Sn-Mn-Ca alloy as anode for Mg-air battery through homogenization prior to extrusion [J]. J. Mater. Sci. Technol., 2021, 60(0): 77-89.
[2]	Dan Liu, Daoxin Liu, Mario Guagliano, Xingchen Xu, Kaifa Fan, Sara Bagherifard. Contribution of ultrasonic surface rolling process to the fatigue properties of TB8 alloy with body-centered cubic structure [J]. J. Mater. Sci. Technol., 2021, 61(0): 63-74.
[3]	D.X. Han, L. Zhao, S.H. Chen, G. Wang, K.C. Chan. Critical transitions in the shape morphing of kirigami metallic glass [J]. J. Mater. Sci. Technol., 2021, 61(0): 204-212.
[4]	Lin Yuan, Jiangtao Xiong, Yajie Du, Jin Ren, Junmiao Shi, Jinglong Li. Microstructure and mechanical properties in the TLP joint of FeCoNiTiAl and Inconel 718 alloys using BNi2 filler [J]. J. Mater. Sci. Technol., 2021, 61(0): 176-185.
[5]	Hui Jiang, Dongxu Qiao, Wenna Jiao, Kaiming Han, Yiping Lu, Peter K. Liaw. Tensile deformation behavior and mechanical properties of a bulk cast Al_0.9CoFeNi₂ eutectic high-entropy alloy [J]. J. Mater. Sci. Technol., 2021, 61(0): 119-124.
[6]	Jincheng Wang, Yujing Liu, Chirag Dhirajlal Rabadia, Shun-Xing Liang, Timothy Barry Sercombe, Lai-Chang Zhang. Microstructural homogeneity and mechanical behavior of a selective laser melted Ti-35Nb alloy produced from an elemental powder mixture [J]. J. Mater. Sci. Technol., 2021, 61(0): 221-233.
[7]	Qin Xu, Dezhi Chen, Chongyang Tan, Xiaoqin Bi, Qi Wang, Hongzhi Cui, Shuyan Zhang, Ruirun Chen. NbMoTiVSi_x refractory high entropy alloys strengthened by forming BCC phase and silicide eutectic structure [J]. J. Mater. Sci. Technol., 2021, 60(0): 1-7.
[8]	K.J. Tan, X.G. Wang, J.J. Liang, J. Meng, Y.Z. Zhou, X.F. Sun. Effects of rejuvenation heat treatment on microstructure and creep property of a Ni-based single crystal superalloy [J]. J. Mater. Sci. Technol., 2021, 60(0): 206-215.
[9]	Hui Xiao, Manping Cheng, Lijun Song. Direct fabrication of single-crystal-like structure using quasi-continuous-wave laser additive manufacturing [J]. J. Mater. Sci. Technol., 2021, 60(0): 216-221.
[10]	Xing Zhou, Jingrui Deng, Changqing Fang, Wanqing Lei, Yonghua Song, Zisen Zhang, Zhigang Huang, Yan Li. Additive manufacturing of CNTs/PLA composites and the correlation between microstructure and functional properties [J]. J. Mater. Sci. Technol., 2021, 60(0): 27-34.
[11]	Zijuan Xu, Zhongtao Li, Yang Tong, Weidong Zhang, Zhenggang Wu. Microstructural and mechanical behavior of a CoCrFeNiCu₄ non-equiatomic high entropy alloy [J]. J. Mater. Sci. Technol., 2021, 60(0): 35-43.
[12]	B.N. Du, Z.Y. Hu, L.Y. Sheng, D.K. Xu, Y.X. Qiao, B.J. Wang, J. Wang, Y.F. Zheng, T.F. Xi. Microstructural characteristics and mechanical properties of the hot extruded Mg-Zn-Y-Nd alloys [J]. J. Mater. Sci. Technol., 2021, 60(0): 44-55.
[13]	Yanxin Qiao, Daokui Xu, Shuo Wang, Yingjie Ma, Jian Chen, Yuxin Wang, Huiling Zhou. Effect of hydrogen charging on microstructural evolution and corrosion behavior of Ti-4Al-2V-1Mo-1Fe alloy [J]. J. Mater. Sci. Technol., 2021, 60(0): 168-176.
[14]	Yunsheng Wu, Xuezhi Qin, Changshuai Wang, Lanzhang Zhou. Microstructural evolution and its influence on the impact toughness of GH984G alloy during long-term thermal exposure [J]. J. Mater. Sci. Technol., 2021, 60(0): 61-69.
[15]	Ruihong Wang, Shengyu Jiang, Bao’an Chen, Zhixiang Zhu. Size effect in the Al₃Sc dispersoid-mediated precipitation and mechanical/electrical properties of Al-Mg-Si-Sc alloys [J]. J. Mater. Sci. Technol., 2020, 57(0): 78-84.