Preparation of Inoculants Used in Superalloy and Analysis of the Atomic Matching Models

doi:10.1016/j.jmst.2013.02.007

Abstract

Abstract:

The mechanisms of grain refinement were investigated on two kinds of grain refiners used in Ni–Fe based superalloys and complete atomic matching modes were constructed in this study. It is found that there are at least three matching crystal planes having the small lattice disregistry between the refiner and the nucleated phase, which can lead to grain refinement of γ matrix. The results indicate that the (0001), (01–10) planes of CrFeNb have a fine crystallographic matching relationship with the (111), (110) planes of γ matrix. The disregistry of (0001)_CrFeNb//(111)_γ, (0110)_CrFeNb//(111)_γ and (0110) _CrFeNb//(110)_γ is 3.34%, 6.60% and 5.90%, respectively. The (0001), (0110) planes of Co₃FeNb₂ and (111), (110) planes of γ matrix also have this relationship. The disregistry of (0001)_Co3FeNb2//(111)_γ, (0001)_Co3FeNb2//(110)_γ, (0110)_Co3FeNb2//(111)_γ and (0110)_Co3FeNb2//(110)_γ is 4.45%, 9.35%, 8.38% and 6.12%, respectively.

Key words: Grain refinement, Growth mechanism, Superalloy, Solidification

Cite this article

Fu Wang, Jun Zhang, Taiwen Huang, Lin Liu, Hengzhi Fu. Preparation of Inoculants Used in Superalloy and Analysis of the Atomic Matching Models[J]. J. Mater. Sci. Technol., 2013, 29(4): 387-392.

share this article

0
/ / Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: https://www.jmst.org/EN/10.1016/j.jmst.2013.02.007

https://www.jmst.org/EN/Y2013/V29/I4/387

References

[1] Y.H. Xiong, J. Du, X.Y. Wei, A.M. Yang, L. Liu, Metall. Mater. Trans. A 35 (2004) 2111-2114.

[2] C.N. Wei, H.Y. Bor, C.Y. Ma, Mater. Chem. Phys. 80 (2003) 89-93.

[3] W.Z. Jin, F.D. Bai, T.J. Li, G.M. Yin, Mater. Lett. 62 (2008) 1585-1588.

[4] L. Liu, T.W. Huang, Y.H. Xiong, A.M. Yang, Z.L. Zhao, R. Zhang, J.S. Li, Mater. Sci. Eng. A 394 (2005) 1-8.

[5] S.H. Chang, J. Alloy Compd. 486 (2009) 716-721.

[6] F. Binczyk, J. ñSleziona, Arch. Foundry Eng. 10 (2010) 195-198.

[7] M. Zieliñnska, Arch. Metall. Mater. nska, J. Sieniawski, M. Wierzbiñ53 (2008) 887-893.

[8] L. Liu, T.W. Huang, Y.H. Xiong, A.M. Yang, Z.L. Zhao, R. Zhang, Li, in: K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R. Reed, J.J. Schirra, S. Walston (Eds.), Superalloy 2004, TMS, Warrendale, PA, USA, 2004, pp. 493-500.

[9] J.S. Miao, T.M. Pollock, J.W. Jones, in: Roger C. Reed, Kenneth A. Green, Pierre Caron, Timothy P. Gabb, Michael G. Fahrmann, Eric S. Huron, Shieka A. Woodard (Eds.), Superalloy 2008, TMS, Warrendale, PA, USA, 2008, pp. 589-597.

[10] S. Bashir, M.C. Thomas, J. Mater. Eng. Perform 2 (1993) 545-550.

[11] R. Liu, S.Q. Xi, S. Kapoor, X.J. Wu, IJRRAS 5 (2010) 110-122.

[12] B.L. Bramfitt, Metall. Trans. 1 (1970) 1987-1995.

[13] Y.H Xiong, A Study of the Processing and Mechanisms of Grain Refinement by the Addition of Refiners for Superalloy K4169, Ph.D. Thesis, Northwestern Polytechnical University, Xi’an, 2000 (in Chinese).

Related Articles 15

[1]	Xiaoxiao Li, Meiqiong Ou, Min Wang, Long Zhang, Yingche Ma, Kui Liu. Effect of boron addition on the microstructure and mechanical properties of K4750 nickel-based superalloy [J]. J. Mater. Sci. Technol., 2021, 60(0): 177-185.
[2]	Xianlong Wang, Jinchuan Jie, Shichao Liu, Zhuangzhuang Dong, Guomao Yin, Tingju Li. Growth mechanism of primary Ti₅Si₃ phases in special brasses and their effect on wear resistance [J]. J. Mater. Sci. Technol., 2021, 61(0): 138-146.
[3]	Lei Luo, Liangshun Luo, Robert O. Ritchie, Yanqing Su, Binbin Wang, Liang Wang, Ruirun Chen, Jingjie Guo, Hengzhi Fu. Optimizing the microstructures and mechanical properties of Al-Cu-based alloys with large solidification intervals by coupling travelling magnetic fields with sequential solidification [J]. J. Mater. Sci. Technol., 2021, 61(0): 100-113.
[4]	K.J. Tan, X.G. Wang, J.J. Liang, J. Meng, Y.Z. Zhou, X.F. Sun. Effects of rejuvenation heat treatment on microstructure and creep property of a Ni-based single crystal superalloy [J]. J. Mater. Sci. Technol., 2021, 60(0): 206-215.
[5]	Hui Xiao, Manping Cheng, Lijun Song. Direct fabrication of single-crystal-like structure using quasi-continuous-wave laser additive manufacturing [J]. J. Mater. Sci. Technol., 2021, 60(0): 216-221.
[6]	Zijuan Xu, Zhongtao Li, Yang Tong, Weidong Zhang, Zhenggang Wu. Microstructural and mechanical behavior of a CoCrFeNiCu₄ non-equiatomic high entropy alloy [J]. J. Mater. Sci. Technol., 2021, 60(0): 35-43.
[7]	Shaoning Geng, Ping Jiang, Xinyu Shao, Lingyu Guo, Xuesong Gao. Heat transfer and fluid flow and their effects on the solidification microstructure in full-penetration laser welding of aluminum sheet [J]. J. Mater. Sci. Technol., 2020, 46(0): 50-63.
[8]	Qiang Zhu, Gang Chen, Chuanjie Wang, Lukuan Cheng, Heyong Qin, Peng Zhang. Microstructure evolution and mechanical property characterization of a nickel-based superalloy at the mesoscopic scale [J]. J. Mater. Sci. Technol., 2020, 47(0): 177-189.
[9]	Xiaoyi Shen, Hongmei Shao, Yan Liu, Yuchun Zhai. Synthesis and photocatalytic performance of ZnO with flower-like structure from zinc oxide ore [J]. J. Mater. Sci. Technol., 2020, 51(0): 1-7.
[10]	Chunjuan Cui, Cong Wang, Pei Wang, Wei Liu, Yuanyuan Lai, Li Deng, Haijun Su. Microstructure and fracture toughness of the Bridgman directionally solidified Fe-Al-Ta eutectic at different solidification rates [J]. J. Mater. Sci. Technol., 2020, 42(0): 63-74.
[11]	Xiaojun Sun, Jie He, Bin Chen, Lili Zhang, Hongxiang Jiang, Jiuzhou Zhao, Hongri Hao. Microstructure formation and electrical resistivity behavior of rapidly solidified Cu-Fe-Zr immiscible alloys [J]. J. Mater. Sci. Technol., 2020, 44(0): 201-208.
[12]	Huihui Yang, Guanyi Jing, Piao Gao, Zemin Wang, Xiangyou Li. Effects of circular beam oscillation technique on formability and solidification behaviour of selective laser melted Inconel 718: From single tracks to cuboid samples [J]. J. Mater. Sci. Technol., 2020, 51(0): 137-150.
[13]	Huiting Zheng, Ruirun Chen, Gang Qin, Xinzhong Li, Yanqing Su, Hongsheng Ding, Jingjie Guo, Hengzhi Fu. Microstructure evolution, Cu segregation and tensile properties of CoCrFeNiCu high entropy alloy during directional solidification [J]. J. Mater. Sci. Technol., 2020, 38(0): 19-27.
[14]	Guang-Jian Yuan, Xian-Cheng Zhang, Bo Chen, Shan-Tung Tu, Cheng-Cheng Zhang. Low-cycle fatigue life prediction of a polycrystalline nickel-base superalloy using crystal plasticity modelling approach [J]. J. Mater. Sci. Technol., 2020, 38(0): 28-38.
[15]	Liu Weifeng, Cao Yanfei, Guo Yifeng, Sun Mingyue, Xu Bin, Li Dianzhong. Solidification microstructure of Cr4Mo4V steel forged in the semi-solid state [J]. J. Mater. Sci. Technol., 2020, 38(0): 170-182.

Metrics

Viewed

Full text

Abstract

Comments

Abstract
References
Related Articles
Recommended Articles
Metrics
Comments

TOP