Ti60高温钛合金电弧离子镀Ti-Al及Ti-Al-Cr涂层氧化行为Evaluation of oxidation of Ti-Al and Ti-Al-Cr coatings arc-ion plated on Ti-60 high-temperature titanium alloy

J. Mater. Sci. Technol. ›› 2009, Vol. 25 ›› Issue (05): 637-644.

Ti60高温钛合金电弧离子镀Ti-Al及Ti-Al-Cr涂层氧化行为Evaluation of oxidation of Ti-Al and Ti-Al-Cr coatings arc-ion plated on Ti-60 high-temperature titanium alloy

闫伟¹;王清江²;刘建荣³;王启民²;孙凤久⁴

1. 东北大学理学院；中国科学院金属研究所钛合金研究部；
2. 中国科学院金属研究所
3. 中国科学院金属研究所钛合金研究部
4. 东北大学理学院

收稿日期:2008-11-27 修回日期:2009-08-14 出版日期:2009-09-28 发布日期:2009-10-10
通讯作者: 闫伟

Evaluation of Oxidation of Ti-Al and Ti-Al-Cr Coatings Arc-ion Plated on Ti-60 High-temperature Titanium Alloy

Wei Yan, Qingjiang Wang, Jianrong Liu, Shaoqiang Li, Fengjiu Sun

1) College of Sciences, Northeastern University, Shenyang 110004, China
2) Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China

Received:2008-11-27 Revised:2009-08-14 Online:2009-09-28 Published:2009-10-10
Contact: YAN Wei

摘要/Abstract

摘要：

摘要

关键词: 氧化;Ti-Al 涂层;Ti-Al-Cr涂层;高温钛合金

Abstract:

High-temperature titanium alloy for aeroengine compressor applications suffers from high-temperature oxidation and environmental corrosion, which prohibits long-term service of this kind alloy at temperatures above 600°C. In an attempt to tackle this problem, Ti-48Al (at. pct) and Ti-48Al-12Cr (at. pct) protective coatings were plated on the substrate of alloy Ti-60 by arc ion plating (AIP) method. Isothermal and cyclic oxidation tests were performed in static air at elevated temperatures. Phase composition, morphology of the coatings and distribution of elements were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX). The results showed that the Ti-48Al coating exhibited good isothermal oxidation resistance during exposure at 800°C, but poorer resistance against oxidation at 900°C. By contrast Ti-48Al-12Cr coating demonstrated excellent isothermal oxidation resistance at both temperatures. Cyclic oxidation tests performed at 800°C indicated that both coatings demonstrated good cyclic oxidation resistance and no spallation of coatings was observed. But at 900°C only Ti-48Al-12Cr coating demonstrated excellent cyclic oxidation resistance.

Key words: Oxidation, Ti-48Al coating, Ti-48Al-12Cr coating, High temperature
titanium alloy

闫伟王清江刘建荣王启民孙凤久. Ti60高温钛合金电弧离子镀Ti-Al及Ti-Al-Cr涂层氧化行为Evaluation of oxidation of Ti-Al and Ti-Al-Cr coatings arc-ion plated on Ti-60 high-temperature titanium alloy[J]. J. Mater. Sci. Technol., 2009, 25(05): 637-644.

Wei Yan,Qingjiang Wang,Jianrong Liu,Shaoqiang Li,Fengjiu Sun. Evaluation of Oxidation of Ti-Al and Ti-Al-Cr Coatings Arc-ion Plated on Ti-60 High-temperature Titanium Alloy[J]. J Mater Sci Technol, 2009, 25(05): 637-644.

参考文献

[1 ] I. Gurrappa and A.K. Gogia: Surf. Coat. Tech., 2001, 139(2-3), 216.
[2 ] D. Vojtech, T. Kubatik, M. Pavlickova and J. Maixner: Intermetallics., 2006, 14, 1181.
[3 ] I. Gurrappa and A.K. Gogia: Mater. Sci. Technol., 2001, 17, 581.
[4 ] L. Niewolak, V. Shemet, A. Gil, L. Singheiser and J. Willem Quadakkers: Adv. Eng. Mater., 2001, 3(7), 81.
[5 ] I. Gurrappa, D. Manova, J.W. Gerlach, S.M and B. Rauschenbach: J. Alloy Compnd., 2006, 426(1-2),375.
[6 ] C. Leyens, M. Peters, P.Eh. Hovsepian, D.B. Lewis, Q. Luo and W.D. Munz: Surf. Coat. Tech., 2002, 155(2-3), 103.
[7 ] D.K. Das and Z. Alam: Surf. Coat. Tech., 2006, 201(6), 3406.
[8 ] S.Y. Sung, B.J. Choi, B.S. Han, H.J. Oh and Y.J. Kim: J. Mater. Sci. Technol., 2008, 24(1), 70.
[9 ] C. leyens and M. Peters: Titanium and Titanium Alloys, 2005, P186, 190, 178. (in Chinese)
[10] J.P. Riviere, L. Pichon , M. Drouet, D. Poquillonb and A. Galdikas: J. Alloy Compnd., 2007, 201(19-20), 5.
[11] W. Kaysser: Surf. Eng., 2001, 17(4), 305.
[12] M. Zhu, M.S. Li, S.W. Duo and Y.C. Zhou: J. Mater. Sci. Technol., 2007, 23, 373.
[13] S.C. Kuang: Oxid. Met., 1990, 34, 217.
[14] Z.L. Tang, F.H. Wang and W.T. Wu: Surf. Coat. Technol., 1998, 99(3), 248.
[15] J.K. Lee, M.H. Oh and D.M. Wee: Intermetallics., 2002, 10, 347.
[16] C. Leyens, J.W. van Liere, M. Peters and W.A. Kaysser: Surf. Coat. Tech., 1998, 108-109(1-3), 30.
[17] G.S. Fox-Rabinovich, D.S. Wilkinson, S.C. Veldhuis, G.K. Dosbaeva and G.C. Weatherly: Intermetallics, 2006, 14, 189.
[18] M.P. Brady, J.L. Smialek, J. Smith and D.L. Humphrey: Acta Mater., 1997, 45, 2371.
[19] H.G. Jung, D.J. Jung and K.Y. Kim: Surf. Coat. Tech., 2002, 154(1), 75.
[20] Z. Tang, V. Shemet, L. Niewolak, L. Singheiser and W.J. Quadakkers: Intermetallics., 2003, 11, 1.
[21] S.Q. Lu, B.Y. Huang, Y.H. He, Y.D. Deng and S.Z. He: Mater. Rev., 2003, 17, 11. (in Chinese)
[22] I. Gurrappa: J. Alloy Compnd., 2005, 389(1-2), 190.
[23] M.P. brady, J.L. Smialek, J. Smith and D.L. Humphrey: Acta Mater., 1997, 45, 2357.
[24] Z. Tang, L. Niewolak, V. Shemet, L. Singheiser, W.J. Quadakkers, F. Wang, W. Wu and A. Gil: Mater. Sci. Eng. A, 2002(1-2), 328, 297.
[25] W. Zhou, Y.G. Zhao, Q.D. Qin, W. Li and B. Xu: Mater. Sci. Eng. A, 2006, 430(1-2), 254.
[26] X.F. Wang, M. Ma and X.B. Liu: Trans. Nonferrous Met. Soc. China, 2006, 16, 1059.
[27] M. Holmquist, V. Recina and B. Pettersson: Acta Mater., 1999, 47, 1791.
[28] K.L. Luthra: Oxid. Met., 1991, 36, 475.
[29] A. Rahmel and P.J. Spencer: Oxid. Met., 1991, 35, 53.
[30] R.A. Perkins and K.T. Chiang: Scripta. Mater., 1987, 21, 1505.