Improvement on the Oxidation Resistance of a Ti3Al Based Alloy by Cr1-xAlxN (0≤x≤0.47) Coatings

J. Mater. Sci. Technol. ›› 2007, Vol. 23 ›› Issue (03): 373-378.

Improvement on the Oxidation Resistance of a Ti3Al Based Alloy by Cr1-xAlxN (0≤x≤0.47) Coatings

朱明

金属研究所

收稿日期:2006-03-13 修回日期:2006-10-17 出版日期:2007-05-28 发布日期:2009-10-10
通讯作者: 朱明

Improvement on the Oxidation Resistance of a Ti3Al Based Alloy by Cr1-xAlxN (0≤x≤0.47) Coatings

Ming ZHU, Meishuan LI, Shuwang DUO. Yanchun ZHOU

Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China...

Received:2006-03-13 Revised:2006-10-17 Online:2007-05-28 Published:2009-10-10
Contact: Meishuan LI

摘要/Abstract

关键词: Reactive, sputtering, Cr1-xAlxN, coatings, H

Abstract: Cr1-xAlxN coatings have been deposited on a Ti3Al based alloy by reactive sputtering method. The results of the isothermal oxidation test at 800–900℃ showed that Cr1-xAlxN coatings could remarkably reduce the oxidation rate of the alloy owing to the formation of Al2O3+Cr2O3 mixture oxide scale on the surface of the coatings. No spallation of the coatings or oxide scales took place during the cyclic oxidation at 800℃. Ti was observed to diffuse into the coatings, the diffusion distance of which was very short, and the diffusion ability of it was proportional to the Al content in the coatings. Compared to Ti, Nb can diffuse much more easily through the whole coatings and oxide scales.

Key words: Cr1-xAlxN coatings, Oxidation, Interdiffusion, Ti3Al based alloy

朱明. Improvement on the Oxidation Resistance of a Ti3Al Based Alloy by Cr1-xAlxN (0≤x≤0.47) Coatings[J]. J. Mater. Sci. Technol., 2007, 23(03): 373-378.

Ming ZHU, Meishuan LI, Shuwang DUO. Yanchun ZHOU. Improvement on the Oxidation Resistance of a Ti3Al Based Alloy by Cr1-xAlxN (0≤x≤0.47) Coatings[J]. J Mater Sci Technol, 2007, 23(03): 373-378.

参考文献

[1] C.M.Austin and C.Opin: Solid State Mater. Sci., 1999, 4, 239.
[2] E.A.Loria: Intermetallics, 2000, 8, 1339.
[3] H.Jiang, M.Hirohasi, Y.Lu and H.Imanari: Scripta Mater., 2002, 46, 639.
[4] V.Gauthier, F.Dettenwanger, M.Schutze, V.Shemet and W.J.Quadakkers: Oxid. Met., 2003, 59, 233.
[5] T.Nishimoto, T.Izumi S.Hayashi and T.Narita: Intermetallics, 2003, 11, 225.
[6] S.K.Jha, A.S.Khanna and C.S.Harendranath: Oxid. Met., 1997, 47, 465.
[7] L.Levin, A.Ginzburg, L.Klinger, T.Werber, A.Katsman and P.Schaaf: Surf. Coat. Technol., 1998, 106, 209.
[8] S-C.Kuang: Oxid. Met., 1990, 34, 217.
[9] Z.L.Tang, F.H.Wang and W.T.Wu: Surf. Coat. Technol., 1998, 99, 248.
[10] Z.W.Li, W.Gao, M.Yoshihara and Y.D.He: Mater. Sci. Eng., 2003, 347A, 243.
[11] F.Wang, Z.Tang and W.Wu: Oxid. Met., 1997, 48, 381.
[12] Y.J.Xi, F.H.Wang and L.L.He: J. Mater. Sci. Technol., 2004, 20, 724.
[13] C.Leyens, M.Peters, P.Eh.Hovsepian, D.B.Lewis, Q.Luo and W.-D.Munz: Surf. Coat. Technol., 2002, 155, 103.
[14] J.B.Choi, K.Cho, M.-H.Lee and K.H.Kim: Thin Solid Films, 2004, 447-448, 365.
[15] S.Hofmann and H.Jehn: Werkst. Korros., 1990, 41, 756.
[16] O.Banakh, P.E.Schmid, R.Sanjmes and E.Levy: Surf Coat. Technol., 2003, 163-164, 57.
[17] M.Zhu, M.S.Li, Y.Y.Li and Y.C.Zhou: Mater. Sci. Eng., 2006, 415A, 177.
[18] Y.Makino and K.Nogi: Surf. Coat. Technol., 1998, 98, 1008.
[19] M.Zhu, M.S.Li and Y.C.Zhou: Surf. Coat. Technol., 2006, 201, 2878.
[20] F.H.Lu and H.Y.Chen: Thin Solid Films, 2001, 398- 399, 368.
[21] F.D.Lai and J.K.Wu: Surf. Coat. Technol., 1994, 64, 53.
[22] G.C.Rybicki and J.L.Smialek: Oxid. Met., 1989, 31, 275.
[23] G.Welsch, J.L.Smialek, J.Waldman and N.S.Jacobson: Oxidation and Corrsion of Intermetallic Alloys, eds. G.Welsch and P.D.Desai, West Lafayette, Indiana, 1996, 173.
[24] J.P.Coad and D.S.Rickerby: Mater. Sci. Eng., 1985, 74, 93.
[25] P.Lamparter, S.Steeb and A.Gokelberger: High Temp.-High Pressures, 1971, 3, 727.
[26] Y.Y.Chang and D.Y.Wang: Surf. Coat. Technol., 2004, 188-189, 478.

Improvement on the Oxidation Resistance of a Ti3Al Based Alloy by Cr1-xAlxN (0≤x≤0.47) Coatings

Improvement on the Oxidation Resistance of a Ti3Al Based Alloy by Cr1-xAlxN (0≤x≤0.47) Coatings

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	. [J]. 材料科学与技术, 2020, 42(0): 28-37.
[2]	. [J]. 材料科学与技术, 2019, 35(9): 1940-1950.
[3]	. [J]. 材料科学与技术, 2019, 35(5): 902-906.
[4]	. [J]. 材料科学与技术, 2018, 34(2): 299-310.
[5]	. [J]. 材料科学与技术, 2017, 33(9): 1055-1060.
[6]	. [J]. 材料科学与技术, 2016, 32(9): 901-908.
[7]	Yun Wang, Ling Zhang, Yanjie Hu, Chunzhong Li. Comparative Study on Optical Properties and Scratch Resistance of Nanocomposite Coatings Incorporated with Flame Spray Pyrolyzed Silica Modified via in-situ Route and ex-situ Route[J]. J. Mater. Sci. Technol., 2016, 32(3): 251-258.
[8]	Yanghuan Zhang, Baowei Li, Huiping Ren, Tai Yang, Shihai Guo, Yan Qi, Dongliang Zhao. Hydrogen Storage Kinetics of Nanocrystalline and Amorphous LaMg₁₂-Type Alloy-Ni Composites Synthesized by Mechanical Milling[J]. J. Mater. Sci. Technol., 2016, 32(3): 218-225.
[9]	Yng Sek Kim, Yng L. J, Yung-Je Kwark. Highly Stable Silicn-Carbn-Nitrgen Cmpsite Andes frm Silsesquiazane fr Rechargeable Lithium-In Battery[J]. J. Mater. Sci. Technol., 2016, 32(3): 195-199.
[10]	Xingxing Liang, Ying Yang, Xin Jin, Jie Cheng. Polyethylene Oxide-Coated Electrospun Polyimide Fibrous Seperator for High-Performance Lithium-Ion Battery[J]. J. Mater. Sci. Technol., 2016, 32(3): 200-206.
[11]	Tingzhi Liu, Yangyang Li, Huan Ke, Yuhai Qian, Shuwang Duo, Yanli Hong, Xinyuan Sun. Chemical Bath Co-deposited ZnS Film Prepared from Different Zinc Salts: ZnSO₄-Zn(CH₃COO)₂, Zn(NO₃)₂-Zn(CH₃COO)₂, or ZnSO₄-Zn(NO₃)₂[J]. J. Mater. Sci. Technol., 2016, 32(3): 207-217.
[12]	Li Jiang, Yiping Lu, Wei Wu, Zhiqiang Cao, Tingju Li. Microstructure and Mechanical Properties of a CoFeNi₂V_0.5Nb_0.75 Eutectic High Entropy Alloy in As-cast and Heat-treated Conditions[J]. J. Mater. Sci. Technol., 2016, 32(3): 245-250.
[13]	Chao Zhang, Hong Li, Miaoquan Li. Detailed Evolution Mechanism of Interfacial Void Morphology in Diffusion Bonding[J]. J. Mater. Sci. Technol., 2016, 32(3): 259-264.
[14]	Beining Du, Zhiwu Shi, Jinxia Yang, Zhaokuang Chu, Chuanyong Cui, Xiaofeng Sun, Liyuan Sheng, Yufeng Zheng. M₅B₃ Boride at the Grain Boundary of a Nickel-based Superalloy[J]. J. Mater. Sci. Technol., 2016, 32(3): 265-270.
[15]	Yingshuang Guan, Enze Liu, Xiurong Guan, Zhi Zheng. Influence of Ru on Solidification Behavior, Microstructure and Hardness of Re-free Ni-based Equiaxed Superalloys with High Cr Content[J]. J. Mater. Sci. Technol., 2016, 32(3): 271-281.