Solidification Structure of Low Carbon Steel Strips with Different Phosphorus Contents Produced by Strip Casting

J. Mater. Sci. Technol. ›› 2006, Vol. 22 ›› Issue (06): 755-758.

Solidification Structure of Low Carbon Steel Strips with Different Phosphorus Contents Produced by Strip Casting

Na Li;Zhenyu Liu;Yiqing Qiu;Zhaosen Lin;Xianghua Liu;Guodong Wang

RAL; Northeastern University

收稿日期:2005-11-11 修回日期:2006-03-16 出版日期:2006-11-28 发布日期:2009-10-10
通讯作者:

Solidification Structure of Low Carbon Steel Strips with Different Phosphorus Contents Produced by Strip Casting

Na LI, Zhenyu LIU, Yiqing QIU, Zhaosen LIN, Xianghua LIU, Guodong WANG

State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China

Received:2005-11-11 Revised:2006-03-16 Online:2006-11-28 Published:2009-10-10
Contact: Na Li

摘要/Abstract

关键词: Phosphorus, Solidification, structure, Stri

Abstract:

In the present paper, low carbon steel strips with different phosphorus contents were produced using a twin roll strip casting process. The solidification structure was studied and its features were analyzed in detail. It was found that the strips possessed a fine microstructure compared with the mould cast steels. With increasing phosphorus content more ferrite has been formed with finer grains.

Key words: hosphorus, Solidification structure, Strip casting, Low carbon steel

Na; Li; Zhenyu; Liu; Yiqing; Qiu; Zhaosen; Lin; Xianghua; Liu; Guodong; Wang. Solidification Structure of Low Carbon Steel Strips with Different Phosphorus Contents Produced by Strip Casting[J]. J. Mater. Sci. Technol., 2006, 22(06): 755-758.

Na LI, Zhenyu LIU, Yiqing QIU, Zhaosen LIN, Xianghua LIU, Guodong WANG. Solidification Structure of Low Carbon Steel Strips with Different Phosphorus Contents Produced by Strip Casting[J]. J. Mater. Sci. Technol., 2006, 22(06): 755-758.

[1]	. [J]. 材料科学与技术, 2018, 34(2): 299-310.
[2]	. [J]. 材料科学与技术, 2017, 33(9): 1055-1060.
[3]	. [J]. 材料科学与技术, 2017, 33(9): 926-934.
[4]	Li Jiang, Yiping Lu, Wei Wu, Zhiqiang Cao, Tingju Li. Microstructure and Mechanical Properties of a CoFeNi₂V_0.5Nb_0.75 Eutectic High Entropy Alloy in As-cast and Heat-treated Conditions[J]. J. Mater. Sci. Technol., 2016, 32(3): 245-250.
[5]	Beining Du, Zhiwu Shi, Jinxia Yang, Zhaokuang Chu, Chuanyong Cui, Xiaofeng Sun, Liyuan Sheng, Yufeng Zheng. M₅B₃ Boride at the Grain Boundary of a Nickel-based Superalloy[J]. J. Mater. Sci. Technol., 2016, 32(3): 265-270.
[6]	Yingshuang Guan, Enze Liu, Xiurong Guan, Zhi Zheng. Influence of Ru on Solidification Behavior, Microstructure and Hardness of Re-free Ni-based Equiaxed Superalloys with High Cr Content[J]. J. Mater. Sci. Technol., 2016, 32(3): 271-281.
[7]	Aboulfazl Moteshakker, Iman Danaee. Microstructure and Corrosion Resistance of Dissimilar Weld-Joints between Duplex Stainless Steel 2205 and Austenitic Stainless Steel 316L[J]. J. Mater. Sci. Technol., 2016, 32(3): 282-290.
[8]	Song Zhuman 张广平. Microstructures dependent fatigue cracking resistance of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy[J]. J. Mater. Sci. Technol., 2012, 28(7): 614-621.
[9]	雷洪赫冀成. 钢液中MgO形核心长大动力学[J]. J. Mater. Sci. Technol., 2012, 28(7): 642-646.
[10]	陆希峰. Synthesis and characterization of In(OH)3 and In2O3 nanorods through carbon spheres template method[J]. J. Mater. Sci. Technol., 2012, 28(5): 396-400.
[11]	Xiujian Chou zhenyu Zhao Miaoxuan Du Jun Liu Jiwei Zhai. Microstructures and Dielectric Properties of B2O3-Li2O Glasses Doped Ba1-xSrxTiO3 Ceramics for LTCC Technology Applications[J]. J. Mater. Sci. Technol., 2012, 28(3): 280-284.
[12]	M. A. Aboelsoud. Kinetics and Nanostructure Dependence of High Temperature-Low Stress Creep of Al and Al-0.3%Fe[J]. J. Mater. Sci. Technol., 2012, 28(1): 27-33.
[13]	Zhongwei Chen Haifang Zhang Yimin Lei. Secondary solidification behavior of AA8006 alloy prepared by suction casting[J]. J. Mater. Sci. Technol., 2011, 27(9): 769-775.
[14]	游才印. Coercivity enhancement of Nd-Fe-B thin film magnets through Dy surface diffusion process[J]. J. Mater. Sci. Technol., 2011, 27(9): 826-830.
[15]	Hojat Ahmadi D.Y. Li Meisam Nouri. Effects of yttrium addition on microstructure, hardness and resistance to wear and corrosive wear of TiNi Alloy[J]. J. Mater. Sci. Technol., 2011, 27(9): 851-855.

Solidification Structure of Low Carbon Steel Strips with Different Phosphorus Contents Produced by Strip Casting

Solidification Structure of Low Carbon Steel Strips with Different Phosphorus Contents Produced by Strip Casting

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价