材料科学与技术 ›› 2022, Vol. 120 ›› Issue (0): 118-128.DOI: 10.1016/j.jmst.2022.02.007
收稿日期:2021-12-05
修回日期:2022-02-08
接受日期:2022-02-21
出版日期:2022-09-01
发布日期:2022-03-10
J.M. Yua,b, T. Hashimotob, H.T. Lic, N. Wanderkad,*(
), Z. Zhange, C. Caib, X.L. Zhongb, J. Qina,*(
), Q.P. Donga, H. Nagaumia, X.N. Wanga
Received:2021-12-05
Revised:2022-02-08
Accepted:2022-02-21
Online:2022-09-01
Published:2022-03-10
Contact:
N. Wanderka,J. Qin
About author:jian.qin@uqac.ca (J. Qin).. [J]. 材料科学与技术, 2022, 120(0): 118-128.
J.M. Yu, T. Hashimoto, H.T. Li, N. Wanderka, Z. Zhang, C. Cai, X.L. Zhong, J. Qin, Q.P. Dong, H. Nagaumi, X.N. Wang. Formation of intermetallic phases in unrefined and refined AA6082 Al alloys investigated by using SEM-based ultramicrotomy tomography[J]. J. Mater. Sci. Technol., 2022, 120(0): 118-128.
| Alloy | Si | Mg | Mn | Fe | Cu | Cr | Ti |
|---|---|---|---|---|---|---|---|
| AA6082 | 1.05 | 0.7 | 0.5 | 0.18 | 0.08 | 0.07 | 0.02 |
Table 1. Chemical composition of the investigated AA6082 alloy (in wt.%).
| Alloy | Si | Mg | Mn | Fe | Cu | Cr | Ti |
|---|---|---|---|---|---|---|---|
| AA6082 | 1.05 | 0.7 | 0.5 | 0.18 | 0.08 | 0.07 | 0.02 |
Fig. 1. SEM images obtained with BSE detector showing the α-Al grains of AA6082 Al alloys (a) unrefined, (b) with Al-5Ti-1B refined and (c) melt conditioned. The secondary phases are distributed along the grain boundaries and inter-dendritic region (arrows indicated some typical intermetallics).
Fig. 2. Three-dimensional visualization of morphology and spatial arrangement of Fe-bearing intermetallics (magenta), Mg2Si (yellow) and eutectic rosettes (Si in cyan) in (a) unrefined Al alloy, (b) Al-5Ti-1B refined Al alloy, (c) MC refined Al alloy.
Fig. 3. Three-dimensional visualization of morphology of Fe-bearing intermetallics in (a) unrefined Al alloy, (b) Al-5Ti-1B refined Al alloy, (c) MC refined Al alloy. Two types of α-Fe intermetallic phases to be distinguished: small isolated and globular α-Fe intermetallic phases within eutectic rosettes; and huge dendritic α-Fe intermetallic phases at grain boundaries and in inter-dendritic regions.
| Alloy | Numbers of measured intermetallics | Total intermetallics volume fraction (%) | Largest intermetallics length (µm) | Largest intermetallics volume (µm3) | Average Al grain size (µm) |
|---|---|---|---|---|---|
| DC | 160,717 | 1.12 | 280.33 | 72,221.7 | 403 ± 89 |
| GR | 159,602 | 1.06 | 369.25 | 69,466.3 | 178 ± 45 |
| MC | 107,900 | 0.94 | 205.15 | 12,413.3 | 211 ± 62 |
Table 2. Fe-bearing intermetallics, their numbers, volume fraction and the maximum length were calculated from a volume of 400 µm × 400 µm × 250 µm for all investigated alloys. (Note: “Length” is calculated by 3D maximum of the Feret diameters.). The average size of the α-Al grains was calculated from 2D images. (The error given is standard deviation σ.).
| Alloy | Numbers of measured intermetallics | Total intermetallics volume fraction (%) | Largest intermetallics length (µm) | Largest intermetallics volume (µm3) | Average Al grain size (µm) |
|---|---|---|---|---|---|
| DC | 160,717 | 1.12 | 280.33 | 72,221.7 | 403 ± 89 |
| GR | 159,602 | 1.06 | 369.25 | 69,466.3 | 178 ± 45 |
| MC | 107,900 | 0.94 | 205.15 | 12,413.3 | 211 ± 62 |
Fig. 4. Typical quantitative analysis of (a) length frequency and volume fraction of Fe-bearing intermetallics and (b) distribution of total volume fraction of Fe-bearing intermetallics corresponding to each length range. The representative significance of Fig. 4(b) is the concentration range of the size distribution of Fe-rich intermetallics. Except for a few large Fe-rich intermetallics for GR and MC, the particle sizes in GR and MC are much smaller than that of DC.
Fig. 5. (a) SEM image of Fe-bearing α-intermetallics at the triple junction of inter-dendritic region of DC alloy; (b) 3D visualization of one of the Fe-bearing α-intermetallics phase (indicated by the rectangle in Fig 5(a)).
Fig. 6. 3D morphology of secondary phases in inter-dendritic boundary in DC alloy: (a) typical morphologies of a complete Fe-bearing α-intermetallics (magenta); (b) 3D visualization of inter-connected secondary Fe-bearing intermetallic phases, Mg2Si phase (yellow) and eutectic rosettes Si (cyan).
Fig. 7. A complete dendritic Fe-bearing α-intermetallics (in magenta) of GR alloy at grain boundary/inter-dendritic boundary initiated from TiB2 particle covered by Si. More details of marked yellow square area are shown in an enlarged square: 2D SEM and 3D images of TiB2 (purplish blue) and Si (cyan) structure.
Fig. 8. Spatial distribution of Fe-bearing α-intermetallics in GR alloy: (a) TiB2 particle on α-intermetallics arm; (b) TiB2 particle wrapped by Mg2Si. (Fe-bearing α-intermetallics in magenta, Mg2Si phase in yellow and TiB2 in purplish blue).
Fig. 9. Spatial distribution of (a) a complete dendritic Fe-bearing α-intermetallics (magenta); (b) Mg2Si (yellow) distribution surrounding dendritic Fe-bearing α-intermetallics; (c) Mg2Si and eutectic rosettes Si (cyan) distribution surrounding dendritic α-intermetallics in GR alloy.
Fig. 10. Formation environment of Mg2Si phases and eutectic rosettes in GR alloy. (Fe-bearing intermetallic phases in magenta, Mg2Si phase in yellow, TiB2 in purplish blue and eutectic rosettes Si in cyan).
Fig. 11. Three-dimensional visualization of intermetallics in GR alloy: (a) distribution of eutectic Si (cell) in cyan and Fe-bearing α-intermetallics (purple) around β-intermetallics (magenta); (b) connected Fe-bearing β-intermetallics; (c) wrapping of Fe-bearing β-intermetallics by Mg2Si phase (yellow); (d) 2D SEM- image of nucleation of Fe-bearing β-intermetallics on TiB2 (in bright white).
Fig. 12. 3D morphology of highly branched Fe-bearing α-intermetallics and surrounding Mg2Si and eutectic rosettes in MC alloy: (a) highly branched Fe-bearing α-intermetallics (magenta) and surrounding Mg2Si (yellow); (b) highly branched α-intermetallics and surrounding eutectic Si rosettes (cyan).
| [1] | O. Reiso, Mater. Forum 28 (2004) 32-46. |
| [2] |
Z. Fan, Y. Wang, Y. Zhang, T. Qin, X.R. Zhou, G.E. Thompson, T. Pennycook, T. Hashimoto, Acta Mater. 84 (2015) 292-304.
DOI URL |
| [3] |
Q. Li, F. Qiu, B.X. Dong, X. Gao, S.L. Shu, H.Y. Yang, Q.C. Jiang, Mater. Sci. Eng. A 777 (2020) 139081.
DOI URL |
| [4] |
C. Zhao, Y. Li, J. Xu, Q. Luo, Y. Jiang, Q. Xiao, Q. Li, J. Mater. Sci. Technol. 94 (2021) 104-112.
DOI URL |
| [5] |
Y. Li, Y. Jiang, B. Liu, Q. Luo, B. Hu, Q. Li, J. Mater. Sci. Technol. 65 (2021) 190-201.
DOI URL |
| [6] |
Y. Li, Y. Jiang, B. Hu, Q. Li, Scr. Mater. 187 (2020) 262-267.
DOI URL |
| [7] |
J. Xu, Y. Li, K. Ma, Y. Fu, E. Guo, Z. Chen, Q. Gu, Y. Han, T. Wang, Q. Li, Scr. Mater. 187 (2020) 142-147.
DOI URL |
| [8] |
Q. Li, B.X. Dong, T.S. Liu, H.Y. Yang, S.L. Shu, F. Qiu, Q.C. Jiang, Mater. Sci. Eng. A 827 (2021) 142093.
DOI URL |
| [9] |
M. Xia, A.K. Prasada Rao, Z. Fan, Mater. Sci. Forum 765 (2013) 291-295.
DOI URL |
| [10] | H.R. Kotadia, J.B. Patel, H.T. Li, F. Gao, Z. Fan, Adv. Mater. Res. 1019 (2014) 90-95. |
| [11] | H.T. Li, J.B. Patel, Z. Fan, in:Proceeding of the 16th International Aluminum Alloys Conference (ICAA16), Montreal, Canada, 2018, pp. 1-7. June 17-19. |
| [12] | H.T. Li, J.B. Patel, H.R. Kotadia, Z. Fan, Mater. Sci. Forum 828-829 (2015) 43-47. |
| [13] |
C.M. Allen, K.A.Q. O’Reilly, B. Cantor, P.V. Evans, Prog. Mater. Sci. 43 (1998) 89-170.
DOI URL |
| [14] | H. Zhu, M.J. Couper, A.K. Dahle, JOM 63 (2011) 66-71. |
| [15] |
L. Sweet, S.M. Zhu, S.X. Gao, J.A. Taylor, M.A. Easton, Metall. Mater. Trans. A 42 (2011) 1737-1749.
DOI URL |
| [16] | S. Kumar, P.S. Grant, K.A.Q. O’Reilly, Metall. Mater. Trans. A 47A (2016) 3000-3014. |
| [17] |
S. Onurlu, A. Tekin, J. Mater. Sci. 29 (1994) 1652-1655.
DOI URL |
| [18] |
S. Zajac, B.B. Hutchinson, A.A. Johansson, L.Q. Gullman, Mater. Sci. Technol. 10 (1994) 323-333.
DOI URL |
| [19] |
M.H. Mulazimoglu, A. Zaluska, J.E. Gruzleski, F. Paray, Metall. Mater. Trans. A 27 (1996) 929-936.
DOI URL |
| [20] | G. Sha, K.A.Q. O’Reilly, B. Cantor, J. Worth, R. Hamerton, Mater. Sci. Eng. A 304-306 (2001) 612-616. |
| [21] |
S. Kumar, K.A.Q. O’Reilly, Mater. Charact. 120 (2016) 311-322.
DOI URL |
| [22] | T. Smith, K. O’Reilly, S. Kumar, I. Stone, Metall. Mater. Trans. A 44A (2013) 4866-4871. |
| [23] |
C.M. Allen, K.A.Q. O’Reilly, P.V. Evans, B. Cantor, Acta Mater. 47 (1999) 4387-4403.
DOI URL |
| [24] | S. Chuaypradit, C. Puncreobutr, A.B. Phillion, J.L. Fife, P.D. Lee, O. Martin, in:The Minerals, Metals & Materials Series, Springer, Cham, 2018, pp. 1067-1073. |
| [25] | J. Rakhmonov, G. Timelli, F. Bonollo, L. Arnberg, Int. J. Met. 11 (2017) 294-304. |
| [26] |
G. Timelli, G. Camicia, S. Ferraro, J. Mater. Eng. Perform. 23 (2014) 611-621.
DOI URL |
| [27] |
S. Haro-Rodríguez, R.E. Goytia-Reyes, D.K. Dwivedi, V.H. Baltazar-Hernández, H. Flores-Zúñiga, M.J. Pérez-López, Mater. Des. 32 (2011) 1865-1871.
DOI URL |
| [28] | C.J. Simensen, P. Fartum, A. Andersen, Z. Fresenius, Anal. Chem. 319 (1984) 286-292. |
| [29] |
T.O. Mbuya, B.O. Odera, S.P. Ng’ang’a, Int. J. Cast Met. Res. 16 (2003) 451-465.
DOI URL |
| [30] |
A. Hassani, K. Ranjbar, S. Sami, Int. J. Miner. Metall. Mater. 19 (2012) 739-746.
DOI URL |
| [31] |
F.H. Samuel, A.M. Samuel, P. Ouellet, H.W. Doty, Metall. Mater. Trans. A 29 (1998) 2871-2884.
DOI URL |
| [32] |
S.G. Shabestari, M. Mahmudi, M. Emamy, J. Campbell, Int. J. Cast Met. Res. 15 (2002) 17-24.
DOI URL |
| [33] |
C. Puncreobutr, A.B. Phillion, J.L. Fife, P. Rockett, A.P. Horsfield, P.D. Lee, Acta Mater. 79 (2014) 292-303.
DOI URL |
| [34] |
Y. Zhao, W. Du, B. Koe, T. Connolley, S. Irvine, P.K. Allan, C.M. Schlepütz, W. Zhang, F. Wang, D.G. Eskin, J. Mi, Scr. Mater. 146 (2018) 321-326.
DOI URL |
| [35] |
Y. Zhao, W. Zhang, D. Song, B. Lin, F. Shen, D. Zheng, C.X. Xie, Z. Sun, Y. Fu, R. Li, J. Mater. Sci. Technol. 80 (2021) 84-99.
DOI URL |
| [36] |
S. Feng, E. Liotti, A. Lui, M.D. Wilson, T. Connolley, R.H. Mathiesen, P.S. Grant, Acta Mater. 196 (2020) 759-769.
DOI URL |
| [37] |
T. Hashimoto, G.E. Thompson, X. Zhou, P.J. Withers, Ultramicroscopy 163 (2016) 6-18.
DOI URL PMID |
| [38] |
J.B. Patel, X. Yang, C.L. Mendis, Z. Fan, JOM 69 (2017) 1071-1076.
DOI URL |
| [39] |
J.M. Yu, N. Wanderka, G. Miehe, J. Banhart, Intermetallics 72 (2016) 53-61.
DOI URL |
| [40] |
J.M. Yu, N. Wanderka, A. Rack, R. Daudin, E. Boller, H. Markötter, A. Manzoni, F. Vogel, T. Arlt, M. Ingo, J. Banhart, J. Alloy. Compd. 766 (2018) 818-827.
DOI URL |
| [41] | S. Kumar, H.B. Nadendla, G.M. Scamans, D.G. Eskin, Z. Fan, Int. J. Met. Res. 103 (2012) 1-7. |
| [42] |
G. Sha, K.A.Q. O’Reilly, B. Cantor, J.M. Titchmarsh, R.G. Hamerton, Acta Mater. 51 (2003) 1883-1897.
DOI URL |
| [43] |
Y.L. Liu, S.B. Kang, J. Mater. Sci. 32 (1997) 1443-1447.
DOI URL |
| [44] |
J.M. Yu, N. Wanderka, A. Rack, R. Daudin, E. Boller, H. Markotter, A. Manzoni, F. Vogel, T. Arlt, I. Manke, J. Banhart, Acta Mater. 129 (2017) 194-202.
DOI URL |
| [45] |
Y. Xu, D. Casari, R.H. Mathiesen, Y. Li, Acta Mater. 149 (2018) 312-325.
DOI URL |
| [46] |
R. Mendoza, K. Thornton, I. Savin, P.W. Voorhees, Acta Mater. 54 (2006) 743-750.
DOI URL |
| [47] |
S. Terzi, L. Salvo, M. Suery, A.K. Dahle, E. Boller, Acta Mater. 58 (2010) 20-30.
DOI URL |
| [48] |
A. Mortensen, Metall. Trans. A 20 (1989) 247-253.
DOI URL |
| [49] |
G. Sha, K.Q. O’Reilly, B. Cantor, R. Hamerton, J. Worth, Mater. Sci. Forum 331-337 (2000) 253-258.
DOI URL |
| [50] | X. Cao, J. Campbell, Metall. Mater. Trans. A 34A (2003) 1409-1420. |
| [51] | W. Khalifa, F.H. Samuel, J.E. Gruzleski, H.W. Doty, S. Valtierra, Metall. Mater. Trans. A 36A (2005) 1017-1032. |
| No related articles found! |
| 阅读次数 | ||||||
|
全文 |
|
|||||
|
摘要 |
|
|||||