| [1 ] R.F. Hochman, N. Tselesin and V. Dris: Adv. Mater. Process., 1998, 8, 36.[2 ] P.C. Miller: Tool. Prod., 1990, 55(12), 100.[3 ] D. Paulmier, H. Zaidi, R. Bedri, E.K. Kadiri, L. Pan and Q. Jiang: Surf. Coat. Technol., 1995, 76{77, 583.[4 ] F.D. Snegovskij and V.A. Uvarov: Trenie I Iznos, 1991, May-Jun., 535.[5 ] M.S.C. Bose: Physica Status Solidi (a), 1984, 86, 649.[6 ] B.E. Klamecki: J. Mater. Process. Technol., 2003, 141, 385.[7 ] F. Tang, A.L. Lu, J.F. Mei, H.Z. Fang and X.J. Luo: J. Mater. Process. Technol., 1998, 74, 255.[8 ] F. Tang: Research on Residual Stress Reduction in Steel by Pulsed Magnetic Treatment, Ph.D. Thesis, Tsinghua University, 1999. (in Chinese)[9 ] S. Wu, A. Lu, H. Zhao, H. Fang and F. Tang: Mater. Sci. Eng. A, 2002, 328, 133.[10] Z.P. Cai, J.A. Lin, L.A. Zhou and H.Y. Zhao: Mater. Sci. Technol., 2004, 20, 1563.[11] Z.P. Cai, H.Y. Zhao, J. Lin and A.L. Lu: Mater. Sci. Eng. A, 2007, 458, 262.[12] Y.L. Song, L. Hua and B. Wang: J. Wuhan Univ. Technol.-Mat. Sci. Edit., 2009, 24(6), 857.[13] J.X. Mu, C.M. Hsiao and W.Y. Chu: Scripta Metall., 1989, 23, 1015.[14] W.D. Callister: Materials Sience and Engineering: an Introduction, 7th edn, Wiley Interscience, New York, 2005, 174{175.[15] W.D. Zhong: Ferromagnetics, Vol. 2, Science Press, Beijing, 1987, 230{238. (in Chinese)[16] R.C. O0Handley: Modern Magnetic Materials: Principles and Applications, John Wiley & Sons, New York, 1999, 215{220.[17] Z.L. Liu, H.Y. Hu and T.Y. Fan: Trans. Beijing Inst. Technol., 2007, 27(2), 113. (in Chinese). |
