Microstructure and Mechanical properties of Hybrid Laser-Friction Stir Welding between AA6061-T6 Al alloy and AZ31 Mg alloy

J. Mater. Sci. Technol. ›› 2011, Vol. 27 ›› Issue (3): 199-204.

Microstructure and Mechanical properties of Hybrid Laser-Friction Stir Welding between AA6061-T6 Al alloy and AZ31 Mg alloy

Heung-Ju Kim

Welding Research Center, Research Institute of Industrial Science and Technology, Pohang 790-600, Korea

收稿日期:2009-04-14 修回日期:2010-09-10 出版日期:2011-03-28 发布日期:2011-03-21
通讯作者: Heung-Ju Kim

Microstructure and Mechanical Properties of Hybrid Laser-Friction Stir Welding between AA6061-T6 Al Alloy and AZ31 Mg Alloy

Woong-Seong Chang, S.R. Rajesh, Chang-Keun Chun, Heung-Ju Kim

Welding Research Center, Research Institute of Industrial Science and Technology, Pohang 790-600, Korea

Received:2009-04-14 Revised:2010-09-10 Online:2011-03-28 Published:2011-03-21
Contact: Heung-Ju Kim

摘要/Abstract

Abstract: For the purpose of improving the strength of this dissimilar joint, the present study was carried out to investigate the improvement in intermetallic layer by using a third material foil between the faying edges of the friction stir welded and hybrid welded Al6061-T6/AZ31 alloy plates. The difference in icrostructural and mechanical characteristics of friction stir welded and hybrid welded Al6061-T6/AZ31 joint was compared. Hybrid buttwelding of aluminum alloy plate to a magnesium alloy plate was successfully achieved with Ni foil as filler material, while defect-free laser-friction stir welding (FSW) hybrid welding was achieved by using a laser power of 2 kW. Transverse tensile strength of the joint reached about 66% of the Mg base metal tensile strength in the case of hybrid welding with Ni foil and showed higher value than that of the friction stir welded joint with and without the third material foil. This may be due to the presence of less brittle Ni-based intermetallic phases instead of Al12Mg17.

Key words: Frictions stir welding, Laser welding, Dissimilar metal joint, Hybrid welding, Magnesium alloy, Aluminum alloy

Heung-Ju Kim. Microstructure and Mechanical properties of Hybrid Laser-Friction Stir Welding between AA6061-T6 Al alloy and AZ31 Mg alloy[J]. J. Mater. Sci. Technol., 2011, 27(3): 199-204.

Woong-Seong Chang, S.R. Rajesh, Chang-Keun Chun, Heung-Ju Kim. Microstructure and Mechanical Properties of Hybrid Laser-Friction Stir Welding between AA6061-T6 Al Alloy and AZ31 Mg Alloy[J]. J Mater Sci Technol, 2011, 27(3): 199-204.

参考文献

[1 ] R. Zettler, A.A.M. da Silva, S.R.A. Blanco and J.F. dos Santos: Adv. Eng. Mater., 2006, 8(5), 415.

[2 ] W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith and C.J. Dawes: Int. Patent Appl. No. PCT/GB92/02203 and GB Patent Appl. No. 9125978.9, 1991.

[3 ] Y.S. Sato, H. Kokawa, M. Enomoto, S. Jogan and T. Hashimoto: Metall. Mater. Trans. A, 1999, 30, 3125.

[4 ] C.G. Rhodes, M.W. Mahoney, W.M. Bingel, R.A. Spurling and W.H. Bampton: Scripta Mater., 1997, 36, 69.

[5 ] M.W. Mahoney, C.G. Rhodes, J.G. Flinto®, R.A. Spurling and W.H. Bampton: Metall. Mater. Trans. A, 1998, 29, 1955.

[6 ] K.V. Jata, K.K. Sankaran and J.J. Rushau: Metall. Mater. Trans. A, 2000, 31, 2181.

[7 ] S.H.C. Park, Y.S. Sato and H. Kokawa: J. Mater. Sci., 2003, 38, 4379.

[8 ] M.B. Kannan, W. Dietzel, R. Zeng, R. Zettler and J.F. dos Santos: Mater. Sci. Eng. A, 2007, 660-461, 243.

[9 ] B.M. Darras, M.K. Khraisheh, F.K. Abu-Farha and M.A. Omar: J. Mater. Process. Technol., 2007, 191, 77.

[10] S. Benavides, Y. Li, L.E. Murr, D. Brown and J.C. McClure: Scripta Mater., 1999, 41(8), 809.

[11] R. Zettler, S. Lomolino, J.F. dos Santos, T. Donath, F. Beckmann, T. Lippman and D. Lohwasser: Weld. in the World, 2005, 49(3/4), 41.

[12] R. Zettler, F. Potomati, J.F. dos Santos and N.G. Al-cantara: Weld. in the World, 2006, 50(11/12), 107.

[13] Y.S. Sato, S.H.C. Park, M. Michiuchi and H. Kokawa: Scripta Mater., 2004, 50, 1233.

[14] H. Uzun, C. Dalle Donne, A. Argagnotto, T. Ghidini, and C. Gambaro: Mater. Design, 2005, 26, 41.

[15] Y. Li, L.E. Murr and J.C. McClure: Mater. Sci. Eng. A, 1999, 271, 213.

[16] Y. Li, E.A. Trillo and L.E. Murr: J. Mater. Sci. Lett., 2000, 19, 1047.

[17] H.W. Zhang, Z. Zhang, and J.T. Chen: Mater. Sci. Eng. A, 2005, 403, 340.

[18] H. Fujii, T. Tatsuno, T. Tsumura, M. Tanaka and K. Nakata: Mater. Sci. Forum, 2008, 580-582, 393.

[19] K.H. Song, T. Takuya and K. Nakata: Mater. Trans., 2009, 50, 1832.

[20] L. Liu, X. Liu and S. Liu: Scripta Mater., 2006, 55, 383.

[21] V. Raghavan: J. Phase Equilib. Di®us., 2009, 30(3), 274.

[22] J.C. Yan, Z.W. Xu, Z.Y. Li, L. Li, and S.Q. Yang: Scripta Mater., 2005, 53, 585.

Microstructure and Mechanical properties of Hybrid Laser-Friction Stir Welding between AA6061-T6 Al alloy and AZ31 Mg alloy

Microstructure and Mechanical Properties of Hybrid Laser-Friction Stir Welding between AA6061-T6 Al Alloy and AZ31 Mg Alloy

RichHTML

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价