Fabrication of open-cell Al foam core sandwich by vibration aided liquid phase bonding method and its mechanical properties

J. Mater. Sci. Technol. ›› 2010, Vol. 26 ›› Issue (5): 423-428.

• Research Articles • 上一篇下一篇

Fabrication of open-cell Al foam core sandwich by vibration aided liquid phase bonding method and its mechanical properties

王辉¹,²,何德坪³,何思渊³,杨东辉⁴

1. 东南大学材料科学与工程学院
2. 江苏省先进金属材料高技术研究重点实验室
3. 东南大学
4. Hohai University

收稿日期:2009-10-26 修回日期:2009-11-06 出版日期:2010-05-31 发布日期:2010-06-01
通讯作者: 王辉

Fabrication of Open-cell Al Foam Core Sandwich by Vibration Aided Liquid Phase Bonding Method and Its Mechanical Properties

Hui Wang, Donghui Yang, Siyuan He, Deping He

1) Jiangsu Key Laboratory of Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing 211189, China
2) College of Mechanics and Materials, Hohai University, Nanjing 210098, China
3) State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China

Received:2009-10-26 Revised:2009-11-06 Online:2010-05-31 Published:2010-06-01
Contact: WANG Hui
Supported by:
the National Program on Key Basic Research Project of China (No. 2006CB601201)
the Research Fund for Doctoral Program of Higher Education of China (No. 200802941010)
the Natural Science Foundation of Hohai University (No. 2008428011)
the Scientific Research Startup Fund of Hohai University (No. 2084140801109)

摘要/Abstract

摘要：

The open-cell Al foam core sandwiches (AFCSs) were successfully fabricated by using a specially designed Zn-Al-Cu based filler alloy via vibration aided liquid phase bonding method. The effects of the vibration on the bonding seam were investigated and the bonding strength between Al foam core and solid Al alloy face sheet was tested by shearing tests. The results show that vibration can significantly improve the quality of the bonding and the shearing strength of the bonding seam, which implies that this joining method has a good potential in practical applications.

关键词: Open-cell Al foam core sandwich, Liquid phase bonding, Vibration, Fabrication, Mechanical property

Abstract:

Key words: Open-cell Al foam core sandwich, Liquid phase bonding, Vibration, Fabrication, Mechanical property

王辉何德坪何思渊杨东辉. Fabrication of open-cell Al foam core sandwich by vibration aided liquid phase bonding method and its mechanical properties[J]. J. Mater. Sci. Technol., 2010, 26(5): 423-428.

Hui Wang Donghui Yang Siyuan He Deping He. Fabrication of Open-cell Al Foam Core Sandwich by Vibration Aided Liquid Phase Bonding Method and Its Mechanical Properties[J]. J Mater Sci Technol, 2010, 26(5): 423-428.

参考文献

[1] M. F. Ashby, A. Evans, N. A. Fleck, L. J. Gibson, J. W. Hutchinson and H. N. G. Wadley: Metal Foams: A Design Guide., Butterworth-Heinemann, Boston , 2000, 3.
[2] H. P. Degischer and B. Kriszi: Handbook of Cellular Metals, Wiley-VCH, Weinheim, 2002, 71.
[3] M. F. Ashby and T. J. Lu: Sci. China, 2003, B46, 521.
[4] A. G. Evans, J. W. Hutchinson and M. F. Ashby: Progr. Mater. Sci., 1999, 43, 171.
[5] L-P. Lefebvre, J. Banhart and D. C. Dunand: Adv. Eng. Mater., 2008, 10, 775.
[6] J. Banhart: Int. J. Vehicle. Design, 2005, 37, 114.
[7] J. Banhart and H-W. Seeliger: Adv. Eng. Mater., 2008, 10, 793.
[8] R. A. Shenoi and J. F. Wellicome: Composite Materials in Maritime Structures, Cambridge University Press, Cambridge, 1993, 154.
[9] D. Schwingel, H-W. Seeliger H-W, C. Vecchionacci, D. Alwes and J. Dittrich: Acta Astrona., 2007, 61, 326.
[10] L. J. Gibson and M. F. Ashby: Cellular Solids: Structure and Properties, 2nd edn, Cambridge University Press, Cambridge, 1997, 125.
[11] D. P. He: Ultralight Porous Metals, Science Press, Beijing, 2009, 93.(in Chinese)
[12] F. Baumg?rtner, I. Duarte and J. Banhart : Adv. Eng. Mater., 2000, 2, 168.
[13] N. M. Bikales: Adhesion and Bonding, Wiley Inter-science, Michigan, 1971, 35.
[14] F. Hillen, D. Pickart-Castillo, I. J. Rass and E. Lugscheider: Weld. Cutt., 2000, 52, 454.
[15] S. Y. Chang, Y. T. Huang and T. H. Chuang: J. Mater. Eng. Perf., 2003, 12, 123.
[16] S. X. L¨1, Z. S. Yu, Z. W. X¨1, J. C. Yan, S. Q. Yang and L. WuTrans. China. Weld. Inst., 2001, 22, 73. (in Chinese)
[17] H. B. Xu, J. C. Yan, Z. W. Xu, B. Y. Zhang and S. Q. Yang: Comp., 2006, A37, 1458.
[18] H. Wang, S. Y. He, X. M. Chu and D. P. He: Acta Metal. Sin., 2009, 45, 723. (in Chinese)
[19] D. P. He, H. Wang, S. Y. He and D. C. Tong: China Patent, ZL 200810018812.3, 2009
[20] Z. W. Xu, J. C. Yan, G. H. Wu, X. L. Kong and S. Q. Yang: Comp. Sci. Technol., 2005, 65, 1959.
[21] H. A. Kucheck: US Patent, No. 3236706, 1966.
[22] A. Mortensen, L. J. Masur, J. A. Cornie and M. C. Flemings: Metall. Trans. A, 1989, 53, 14.
[23] D. H. Yang and D. P. He: Sci. China, 2001, B44, 411.
[24] J. C. Yan, Z. W. Xu, S. X. L¨1 and S.Q. Yang:J. Mater. Sci. Technol., 2004, 20, 401.
[25] H. B. Xu, J. C. Yan and S. Q. Yang: Chin. J. Mech. Eng., 2005, 41, 152. (in Chinese)
[26] A. S. Zuruzi, H. Li and G. Dong: Mater. Sci. Eng., 1999, A270, 244.

Fabrication of open-cell Al foam core sandwich by vibration aided liquid phase bonding method and its mechanical properties

Fabrication of Open-cell Al Foam Core Sandwich by Vibration Aided Liquid Phase Bonding Method and Its Mechanical Properties

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 7

编辑推荐

Metrics

本文评价

[1]	. [J]. 材料科学与技术, 2018, 34(2): 299-310.
[2]	Chao Zhang, Hong Li, Miaoquan Li. Detailed Evolution Mechanism of Interfacial Void Morphology in Diffusion Bonding[J]. J. Mater. Sci. Technol., 2016, 32(3): 259-264.
[3]	闫淑卿. The influence of different Al contents on the microstructure and property of Zn-based alloy[J]. J. Mater. Sci. Technol., 2010, 26(7): 648-652.
[4]	Younghoon Moon. Effect of laser parameters on sintered powder morphology[J]. J. Mater. Sci. Technol., 2010, 26(4): 375-378.
[5]	姜卫国董加胜楼琅洪刘鸣胡壮麒. Preparation and properties of a novel water soluble core material[J]. J. Mater. Sci. Technol., 2010, 26(3): 270-275.
[6]	周湘文朱跃峰梁吉于溯源. New fabrication of Styrene-Butadiene Rubber /Carbon Nanotubes nanocomposite and corresponding mechanical properties[J]. J. Mater. Sci. Technol., 2010, 26(12): 1127-1132.
[7]	Song Meihui. Mechanical properties of Cf/Mg composites fabricated by pressure infiltration method[J]. J. Mater. Sci. Technol., 2010, 26(10): 931-935.