锘�
J. Mater. Sci. Technol. 2009, 25(02) 203-207 DOI:     ISSN: 1005-0302 CN: 21-1315/TG
Current Issue | Archive | Search                                                            [Print]   [Close]
Articles
Information and Service
This Article
Supporting info
PDF(1512KB)
[HTML]
Reference
Service and feedback
Email this article to a colleague
Add to Bookshelf
Add to Citation Manager
Cite This Article
Email Alert
Keywords
Numerical simulation
Residual stress
Reaction layer
Brazing
Authors
Lixia Zhang
Jicai Feng
PubMed
Article by
Article by

Effect of Reaction Layers on the Residual Stress of the Brazed TiC Cermets/Steel Joints

Lixia Zhang† and Jicai Feng

National Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, China

Abstract：

For the first time, considering the effect of reaction layers, numerical simulation calculation of residual stress on brazed TiC cermets/steel joint was studied by finite element method (FEM). The calculation results show that, when the joint is brazed at 1123 K for 300 s (low brazing parameters), the maximum shear stress value occurs on (Cu, Ni) layer near TiC cermets, which is 92.16 MPa as the temperature is 300 K. When the joint is brazed at 1273 K for 900 s (high brazing parameters), the maximum shear stress value occurs on (Cu, Ni)+(Fe, Ni) layer, which is 39.18 MPa as the temperature is 300 K. The fracture sites of the joints obtained from numerical simulation calculation accord with experimental results.

Keywords： Numerical simulation   Residual stress   Reaction layer   Brazing  
Received 2007-10-09 Revised 2008-03-11 Online: 2009-10-10 
DOI:
Fund:

the National Natural Science Foundation of China under grant No. 50705022
the Program of Excellent Team in Harbin Institute of Technology, China

 

Corresponding Authors:
Email: zhanglxia@hit.edu.cn
About author:
References：
[1]J.C. Han, X.H. Zhang and J.V. Wood: Mater. Sci. Eng., 2000, 280A(2), 328.
[2]L.X. Zhang, J.C. Feng and P. He: Mater. Sci. Eng., 2006, 428A(1-2), 24.
[3]K.M. Hafez and M. Naka: J. Mater. Sci. Technol., 2003, 19(Suppl.1), 176.
[4]Y.C. Yoo, J.H. Kim and K. Park: Mater. Lett., 2000, 42(6), 362.
[5]C.G. Zhang, G.J. Qiao and Z.H. Jin: J. Eur. Ceram. Soc., 2002, 22(13), 2181.
[6]A.V. Durov, B.D. Kostjuk and A.V. Shevchenko: Mater. Sci. Eng., 2000, 290A(1), 186.
[7]P.T. Vianceo, J.J. Stephens, P.F. Hlava and C.A. Walker: Weld. J., 2003, 82(10), 268.
[8]G. Chaumat, B. Drevet and L. Vernier: J. Eur. Ceram. Soc., 1997, 17(15-16), 1925.
[9]A.M. Kliauga, D. Travessa and M. Ferrante: Mater. Charact., 2001, 46(1), 65.
[10]D. Travessa, M. Ferrantem and O.G. Den: Mater. Sci. Eng., 2002, 337A(1-2), 287.
[11]D.H. He, Z.Y. Fu and Q.J. Zhang: J. Mater. Sci. Technol., 2004, 20(6), 763.
[12]S.I. Matsuoka: J. Mater. Process. Technol., 1998, 75(1-3), 259.
[13]J. Feng, D. Wang, H. Liu and Z. Li: Sci. Technol. Weld. Joining, 2003, 8(2), 138.
[14]L.X. Zhang and J.C. Feng: J. Mater. Sci. Technol., 2004, 20(3), 261.
[15]M. Via, C. Prieto, P. Miranzo, M.I. Osendi, J.M. Del Rio and J.L. Perez-Castellanos: J. Am. Ceram. Soc., 2005, 88(9), 2515.
[16]Y.P. Lei, F.J. Han, Z.D. Xia, J.C. Feng and H.J. Liu: China Mechanical Eng., 2004, 15(9), 768. (in Chinese)
[17]W.C. Jing, J.M. Gong, H. Chen and S.D. Tu: J. Jiangsu Univ., 2007, 28(3), 224. (in Chinese)
[18]J. Zhang and L.Y. Jin: Mater. Sci. Technol., 2005, 21(12), 1455.
[19]J. Cao, J.C. Feng and Z.R. Li: Trans. China Weld. Inst., 2005, 26(1), 5. (in Chinese)
[20]J.G. Yang, S.D. Ji and H.Y. Fang: China Weld., 2006, 15(3), 74.
[21]Y.G. Pan and S.T. Zhong: Steel Struct., 1994, 3, 145. (in Chinese)
[22]H.X. Zhang, W.X. Wang, Q.S. Meng and Z.Q. Cui: J. Taiyuan University Sci. Technol., 2004, 35(1), 13. (in Chinese)
[23]D.W. Yu, Q.Q. Wang, H. Ding, K.C. Gu and S. Liu: Casting Equip. Res., 1995, 8, 25. (in Chinese)
Similar articles
1．Guancheng LI, Yonglin KANG.FEM Simulation of Bending Formability for Laminate Steel/Resin/Steel Lightweight Composite Sheet[J]. J. Mater. Sci. Technol., 2003,19(04): 324-326
2．Guangquan Yue Boming Zhang Fuhong Dai Shanyi Du.Three-dimensional Cure Simulation of Stiffened Thermosetting Composite Panels[J]. J. Mater. Sci. Technol., 2010,26(05): 467-471
3．J. T. Niu, H. T. Li, X. D. Meng and P. Karjaleinen 1) Analysis and Measurement Center, Harbin Institute of Technology, Harbin 150001, China 2) Department of Mechanocal Engineering, The University of Oulu, Finland.NUMERICAL SIMULATION METHODS AND THEIR APPLICATION IN MATERIAL HOT-WORKING[J]. J. Mater. Sci. Technol., 2000,13(2): 494-501
4．ZHU Xianhua DONG Zengzhang SU Junyi Xi'an Jiaotong University,Xi'an,China.NUMERICAL SIMULATION ON SOLIDIFICATION OF HORIZONTALLY CONTINUOUSLY CAST IRON BARS[J]. J. Mater. Sci. Technol., 1990,3(12): 384-390
5．XU Daming LI Qingchun Harbin Institute of Technology,Harbin,China.NUMERICAL SIMULATION OF HEAT,MASS AND MOMENTUM TRANSFERS IN METALLIC INGOTS AND PREDICTION OF MACROSEGREGATION[J]. J. Mater. Sci. Technol., 1991,4(7): 37-41
6．YU Qiuping ZHOU Yaohe Northwestern Polytechnical University,Xi'an,China.NUMERICAL SIMULATION OF CHANNEL SEGREGATION IN Al-4.5wt-%Cu ALLOY[J]. J. Mater. Sci. Technol., 1991,4(8): 108-114
7．LI Baokuan HE Jicheng LU Zhongwu Northeast University of Technology,Shenyang,China doctor,Department of Thermal Energy Northeast University of Technology,Shenyang 110006,China.NUMERICAL SIMULATION ON FLOW AND MIXING PROCESSES IN BOTTOM BLOWN LADLES[J]. J. Mater. Sci. Technol., 1993,6(11): 359-363
8．Y. Chen; Y. Huo; X. Zu; M. Tu and Y. Gou ( Department of Metal Materials, Sichuan University, Chengdu 610065, China)( Department of Metal Materials, Sichuan University, Chengdu 610065, China)( Department of Metal Materials, Sichuan University, Chengdu 610065, China)( Department of Physics, Sichuan University, Chengdu 610065, China)( National Key Lab for Nuclear Fuel and Materials of China, Chengdu 610005, China).STRESS-STRAIN HYSTERESIS OF Cu-Zn-Al POLYCRYSTALLINE SMAs─Ⅱ: EXPERIMENTS AND NUMERICAL SIMULATIONS[J]. J. Mater. Sci. Technol., 1999,12(3): 211-215
9．J. F. Gu; J. S. Pan; M. J. Hu and F. F. Shen (School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200030, China).COUPLED NUMERICAL SIMULATION ON COLD ROLLER'S TEM- PERATURE FIFLD-PHASE TRANSFORMATION-STRESS FIELD DURING ITS QUENCHING PSOCESS[J]. J. Mater. Sci. Technol., 2000,13(1): 254-262
10．X. Q. Yang; L. X. Huo; Y. F. Zhang and J. X. Yan (School of Material Science and Engineering, Tianjin University, Tianjin 300072, China).STUDY ON THE PREDICTIVE METHOD OF BUCKLING DEFORMATIONS OF THIN-PLATE WELDED STRUCTURES[J]. J. Mater. Sci. Technol., 2000,13(1): 178-186
11．L. Q. Li; L. Y. Li and Z. Geng (National Key Laboratory of Advanced Welding Production Technology, HIT, Harbin 1500001, China).NUMERICAL SIMULATION OF PENETRATION PROCESS BASED ON THE VARIATION OF HEAT TRANSFER CONDITION[J]. J. Mater. Sci. Technol., 2000,13(1): 157-161
12．Y. H. Wei; R. P. Liu and Z. J. Dong( 1) National Key Laboratory of Advanced Welding Production Technology, HIT, Harbin 150001, China 2) Harbin Research institute of Welding,Harbin 150080, China).NUMERICAL SIMULATION OF STRESS-STRAIN DISTRIBUTIONS FOR WELD METAL SOLIDIFICATION CRACKING IN STAINLESS STEEL[J]. J. Mater. Sci. Technol., 2000,13(1): 133-138
13．Q. Y.Shi;A. L. Lu; H. Y.Zhao ; A.P. Wu (Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China).DEVELOPMENT AND APPLICATION OF ADAPTIVE MESH TECHNIQUE IN THREE DIMENSIONAL NUMERICAL SIMULATION OF WELDING PROCESS[J]. J. Mater. Sci. Technol., 2000,13(1): 33-39
14．L.L. Chen, R.X. Liu and H.T. Lin College of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China.NUMERICAL SIMULATION OF CASTING PROCESS[J]. J. Mater. Sci. Technol., 2000,13(2): 764-769
15．X. Hong and K.G. Wu Shanghai University, Shanghai 200072, China.NUMERICAL SIMULATION OF HOT SAWING PROCESS[J]. J. Mater. Sci. Technol., 2000,13(2): 692-696
Copyright by J. Mater. Sci. Technol.