|
Information and Service
|
|
| This Article | |
 |
Supporting info |
|
PDF(2820KB) |
|
[HTML] |
|
Reference |
| Service and feedback | |
|
Add to Citation Manager |
|
Cite This Article |
|
Email Alert |
| Keywords | |
|
Ferritic stainless steel |
|
Shielded metal arc welding |
|
Tensile properties |
|
Impact toughness |
| Authors | |
|
K. Shanmugam |
|
A.K. Lakshminarayanan |
|
V. Balasubramanian |
| PubMed | |
|
Article by |
|
Article by |
|
Article by |
Tensile and Impact Properties of Shielded Metal Arc Welded AISI 409M Ferritic Stainless Steel Joints
K. Shanmugam, A.K. Lakshminarayanan and V. Balasubramanian†
Centre for Materials Joining & Research (CEMAJOR), Department of Manufacturing Engineering, Annamalai University, Annamalai Nagar 608 002, Tamil Nadu, India
The present study is concerned with the effect of filler metals such as austenitic stainless steel, ferritic stainless steel and duplex stainless steel on tensile and impact properties of the ferritic stainless steel conforming to AISI 409M grade. Rolled plates of 4 mm thickness were used as the base material for preparing single pass butt
welded joints. Tensile and impact properties, microhardness, microstructure and fracture surface morphology of the joints fabricated by austenitic stainless steel, ferritic stainless steel and duplex stainless steel filler metals were evaluated and the results were reported. From this investigation, it is found that the joints fabricated by
duplex stainless steel filler metal showed higher tensile strength and hardness compared to the joints fabricated by austenitic and ferritic stainless steel filler metals. Joints fabricated by austenitic stainless steel filler metal exhibited higher ductility and impact toughness compared with the joints fabricated by ferritic stainless steel and duplex stainless steel filler metals.
| [1] | T. Mohandas, G.M. Reddy and M. Naveed: J. Mater. Process. Technol, 1999, 94, 133. |
| [2] | E. Folkhard: Welding Metallurgy of Stainless Steels, Spring-Verlag Wien, New York, 1988. |
| [3] | J.C. Villafuerte and H.W. Kerr: Metall. Trans. A, 1990, 21, 979. |
| [4] | J.C. Villafuerte and H.W. Kerr: Weld. J., 1990, 69, 1. |
| [5] | J.C. Villafuerte and H.W. Kerr and S.A. David: Mater. Sci. Eng. A, 1995, 194, 187. |
| [6] | A.C.T.M. Van Zwieten and J.H. Bulloch: Int. J. Pressure Vessels Pip, 1993, 56, 1. |
| [7] | B. Norman: Weldability of Ferritic steels, Abington Publishing, Cambridge, 1994. |
| [8] | P. Sathiya, S. Aravindan and A. Noorul Haq: Int. J. Adv. Manuf. Technol, 2007, 31, 1076. |
| [9] | B.T. Timofeev, G.P. Karzov, A.A. Blumin and V.V. Anikovsky: Int. J. Pressure Vessels Pip, 1999, 76, 393. |
| [10] | S. Liv and D.L.Olson: Weld. J., 1986, 65, 139. |
| [11] | R.A. Farrar and Z. Zhang: Mater. Sci. Technol., 1995, 117, 759. |
| [12] | B. Dixon and K. Hackansson: Weld. J., 1995, 74, 122. |
| [13] | V. Balasubramanian and B. Guha: Sci. Technol. Weld. Join, 1999, 4, 265. |
| [14] | S. Hoekstra, M. Schmidt, M.A. Vander Burg and G. Denouden: Met. Constr., 1986, 6, 771. |
| [15] | R.J. Klassen, M.N. Bassim, M.R. Bayonmi and H.G.F. Wilsdorf: Mater. Sci. Eng, 1986, 80, 25. |