锘�
J. Mater. Sci. Technol. 2004, 20(06) 641-643  DOI:      ISSN: 1005-0302 CN: 21-1315/TG

Current Issue | Archive | Search                                                            [Print]   [Close]
Research Articles
Information and Service
This Article
Supporting info
PDF(427KB)
[HTML]
Reference
Service and feedback
Email this article to a colleague
Add to Bookshelf
Add to Citation Manager
Cite This Article
Email Alert
Keywords
Additive AlCl¬
Nanocrystalline TiO2
Crystal phase
Particle size
Microstructural parameters
Authors
Haiping XU
Yanping SUN
Xinmou CHEN
PubMed
Article by
Article by
Article by

Effects of Additive AlCl3 on Crystal Phase, Particle Size and Microstructural Parameters of Nanocrystalline TiO2 Prepared by HF-PCVD

Haiping XU, Yanping SUN, Xinmou CHEN

Department of Chemical Engineering, Taiyuan University of Technology, Taiyuan 030024, China...

Abstract

Nanocrystalline TiO2 was prepared by high frequency plasma chemical vapor deposition (HF-PCVD). The effects of additive AlCl3 on crystal phase, particle size and microstructural parameters of TiO2 nanocrystallites were investigated by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The nanocrystallites obtained experimentally are mixture of anatase and rutile, the uniform diameters of particles are about 30 nm. The phase transformation from anatase to rutile was accelerated by AlCl3, and rutile content is increased from 26.7 wt pct to 53.6 wt pct with increasing of addition of AlCl3 from 0.0 wt pct to 5.0 wt pct. The particle size is reduced and the size distribution becomes very narrow. The crystal lattice constants have the trend to decrease, and cell volumes appear as shrinkable.

Keywords Additive AlCl¬   Nanocrystalline TiO2   Crystal phase   Particle size   Microstructural parameters   
Received 1900-01-01 Revised 1900-01-01 Online: 2009-10-10 
DOI:
Fund:
Corresponding Authors: Yanping SUN
Email: ypsun@tyut.edu.cn
About author:

References:
Similar articles

Copyright by J. Mater. Sci. Technol.