锘�
J. Mater. Sci. Technol. 2004, 20(02) 189-192  DOI:      ISSN: 1005-0302 CN: 21-1315/TG

Current Issue | Archive | Search                                                            [Print]   [Close]
Research Articles
Information and Service
This Article
Supporting info
PDF(920KB)
[HTML]
Reference
Service and feedback
Email this article to a colleague
Add to Bookshelf
Add to Citation Manager
Cite This Article
Email Alert
Keywords
Real vapor pressure
Volatile elements
ISM process
Ni-Al alloy
Authors
Jingjie GUO
Guizhong LIU
Yanqing SU
Jun JIA
Hengzhi FU
PubMed
Article by
Article by
Article by
Article by
Article by

Theoretical Calculation of the Real Vapor Pressure of Al during ISM Processing of Ni-xAl (at. pct) (x=25~50) Alloy

Jingjie GUO, Guizhong LIU, Yanqing SU, Jun JIA, Hengzhi FU

School of Materials Science and Engineering, Harbin Institute of Technology

Abstract

A new model was established to calculate the real vapor pressure of Al in the molten Ni-xAl (at. pct) (x=25~50) alloy. The effects of the holding time, chamber pressure, mole fraction of Al and melting temperature on the real vapor pressure of Al in the vacuum chamber were analyzed. Because of the impeding effect of the real vapor pressure on the evaporation loss rate, within a short time (less than 10 s), the real vapor pressure tends to a constant value. When the chamber pressure is less than the saturated vapor pressure of Al, the real vapor pressure of Al is equal to the chamber pressure. While when the chamber pressure is higher than the saturated vapor pressure, the real vapor pressure of Al approaches to the saturated vapor pressure of Al of the same condition.

Keywords Real vapor pressure   Volatile elements   ISM process   Ni-Al alloy   
Received 2004-04-17 Revised 1900-01-01 Online: 2009-10-10 
DOI:
Fund:
Corresponding Authors:
Email: guojj@hope.hit.edu.cn
About author:

References:
Similar articles

Copyright by J. Mater. Sci. Technol.