|
J. Mater. Sci. Technol. 2004, 20(02) 163-166 DOI:
ISSN: 1005-0302 CN: 21-1315/TG |
|
|
|
|
Current Issue |
Archive |
Search
[Print]
[Close]
|
|
| Research Articles |
|
|
The Role of Nd Solid-Solution and Grain-Boundary Segregation in Binary NiAl Intermetallic Compound |
|
|
Weili REN,Jiangting GUO,Gusong LI,Jiyang ZHOU |
|
|
Institute of Metal Research, Chinese Academy of Sciences |
|
|
Abstract:
The role of Nd solid-solution and grain-boundary segregation in binary NiAl alloy was studied based on microhardness and compressive macrostrain. X-ray and Auger spectra studies indicate that Nd not only is soluble in grain interiors, but also segregates to the grain boundaries. Nd solid-solution induces an increase of the microhardness from 269 to 290 HV in grain interiors and segregation results in an enhancement of hardness from 252 to 342 HV on grain boundaries. Thus, the cohesion of grain boundaries is enhanced by Nd segregation, which make the alloy doped with 0.05 wt pct Nd exhibit more compressive microstrain, i.e. the higher the compressive ductility at room temperature, the better the final surface condition at elevated temperature. Finally, a discussion was made on the reason that Nd strengthens the grain boundaries in NiAl intermetallic alloy. |
|
Keywords:
Nd
NiAl alloys
Solid-solution
Grain-boundary segregation
Mechanical properities
|
|
|
Received 2004-04-12 Revised 1900-01-01 Online: 2009-10-10 |
|
|
DOI: |
|
|
Fund: |
|
Corresponding Authors: Jiangting GUO |
|
Email: jtguo@imr.ac.cn |
|
|
About author: |
|
|
| References: |
|
| Similar articles |
| 1. LIU Fuyun; ZHOU Hailing (Central Research institute of Building and Construction; Beijing 100088).STUDY ON AN ACID AND HEAT RESISTANT MASTIC CURED AT LOWER TEMPERATURES[J]. J. Mater. Sci. Technol., 1998,10(6): 42-45 |
| 2.Byung-Hui Choi, Byung-Ki Choi.Evaluation of Mechanical Properties According to Nb Content of High Strength Steel Manufactured in VIM[J]. J. Mater. Sci. Technol., 2008,24(05): 793-796 |
| 3.Guancheng LI, Yonglin KANG.FEM Simulation of Bending Formability for Laminate Steel/Resin/Steel Lightweight Composite Sheet[J]. J. Mater. Sci. Technol., 2003,19(04): 324-326 |
| 4.W.Q.Zhang, L.Xiao.A NUMERICAL MODEL OF LAMELLAR SPACING OF Al-Si EUTECTIC[J]. J. Mater. Sci. Technol., 2001,14(4): 291-295 |
| 5.Yuanyuan LI, Xiaoqiang LI, Yan LONG, Wei XIA, Min ZHU, Weiping CHEN.Fabrication of Iron-base Alloy by Spark Plasma Sintering[J]. J. Mater. Sci. Technol., 2006,22(02): 257-260 |
| 6.Rongfa CHEN, Dunwen ZUO, Min WANG.Improvement of Joint Strength of SiCp/Al Metal Matrix Composite in Transient Liquid Phase Bonding Using Cu/Ni/Cu Film Interlayer[J]. J. Mater. Sci. Technol., 2006,22(03): 291-294 |
| 7.R.M. Wang; C.Z. Li;S. W. Zhang and M.G.Yan(1)Institute of Aeronautical Materials, Beijing 100095, China 2)Laboratory of Atomic Imaging of Solids, Institute of Metal Research, Chinese Academy of Sciences,Shenyang 110015, China 3)Beijing Laboratory of Electron Microscopy, Chinese Academy of Sciences, Beijing 100080,China Manuscript received 26 August 1996).HREM STUDY OF GRAIN BOUNDARY PHASES IN Fe-Ni-Co-Nb-Ti SUPERALLOY[J]. J. Mater. Sci. Technol., 1996,9(6): 595-600 |
| 8.ZHOU Bangxin ZHENG Sikui WANG Shunxin Southwest Centre for Nuclear Reactor Engineering Research and Design,Chengdu,China [Originally published in ACTA METALL SIN(CHINESE EDN)25(3)1989 pp A190—A195, Southwest Centre for Nuclear Reactor Engineering Research and Design,Chengdu,China.IN-SITU ELECTRON MICROSCOPY STUDY ON PRECIPITATION OF ZIRCONIUM HYDRIDES INDUCED BY STRESS AND STRAIN IN ZIRCALOY-2[J]. J. Mater. Sci. Technol., 1989,2(6): 412-417 |
| 9.ZHANG Anfeng; WANG Yuyue; XING Ji; ong; LI Changjiu.SYNERGISTIC EFFECTS BETWEEN EROSION AND CORROSION OF TWO COATINGS AND TWO STEELS IN TWO--PHASE FLOW[J]. J. Mater. Sci. Technol., 2004,40(4): 411-415 |
| 10.WANG Fengjiang; QIAN Yiyu; MA Xin.Measurement of Mechanical Properties of Sn--Ag--Cu Bulk Solder BGA Solder Joint Using Nanoindentation[J]. J. Mater. Sci. Technol., 2005,41(7): 775-779 |
| 11.LI Jiguang;SUN Xudong;WANG Yarong;DONG Wenxin;RU Hongqiang;HAO Shiming (School of Materials and Metallurgy; Northeastern University; Shenyang 110006).STUDY OF INITIAL STAGE SINTERING OF NANOCRYSTALLINE α-Al_2O_3 POWDER BY ISOTHERMAL METHOD[J]. J. Mater. Sci. Technol., 1998,34(2): 189-194 |
| 12..COUNTER-MEASUERES AGAINST EXPLOSIVE ERUPTION AND LEAK OF STEAM BOILER COMPONENTS[J]. J. Mater. Sci. Technol., 2001,13(5): 297-299 |
| 13.XI Zengzhe; YANG Gencang; LU Yili; ZHOU Yaohe (State Key Laboratory of Solidification Processing; Northwestern Polytechnical University; Xi'an 710072).THE NUCLEATION OF HIGHLY UNDERCOOLED Ni-Ni_3Si ALLOY CLOSED TO EUTECTIC COMPOSITION[J]. J. Mater. Sci. Technol., 1998,34(5): 511-516 |
| 14.Yongtao Zhao Junhui Dong Yonglin Ma Liping Zhao Xiaobing Pei.Mechanical and Galvano-chemistry Property Variation within Dissimilar Metal Weld between 1Cr18Ni9Ti and 1Cr13 Stainless Steel[J]. J. Mater. Sci. Technol., 2010,26(05): 477-480 |
| 15.YANG Ruzeng; DAI Qixun (Jiangsu University of Science and Technology, Zhenjiang, Jiangsu, China Manuscript received 10 January, 1995).FORMATION OFδ-PHASE IN AUSTENITIC STEELS[J]. J. Mater. Sci. Technol., 1995,8(3): 199-203 |
|
| Copyright by J. Mater. Sci. Technol. |