|
Information and Service
|
|
| This Article | |
 |
Supporting info |
|
PDF(1059KB) |
|
[HTML] |
|
Reference |
| Service and feedback | |
|
Add to Citation Manager |
|
Cite This Article |
|
Email Alert |
| Keywords | |
|
Magnesium alloys |
|
Yield asymmetry |
|
Texture |
|
Grain size |
|
Equal channel angular pressing (ECAP) |
| Authors | |
|
YUN Shu-Meng |
| PubMed | |
|
Article by Yun,S.M |
Influence of Grain Size and Texture on the Yield Asymmetry of Mg-3Al-1Zn Alloy
S.M. Yin, C.H. Wang, Y.D. Diao, S.D. Wu, S.X. Li
1) Shenyang University of Chemical Technology, Shenyang 110142, China
2) Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China
The yield asymmetry between compression and tension of magnesium alloy Mg-3Al-1Zn (AZ31) with different grain sizes and textures has been studied by tensile and compressive testing of as-cast, as-extruded and equal channel angular pressed (ECAPed) specimens. The significant yield asymmetry (the ratio of yield strength between compression and tension σyc/σyt is~0.44) was found in as-extruded specimens and the corresponding microstructure evolution during deformation revealed that {1012} tensile twinning is the underlying reason for the large yield asymmetry. Strong texture and grain size are influential factors for large yield asymmetry. The separate contributions of grain size and texture on yield asymmetry were investigated.
the National Natural Science Foundation of China under Grant Nos. 50471082 and 50571102
| [1] |
Y. Kojima, T. Aizawa, S. Kamado and K. Higashi: Mater. Sci. Forum, 2003, 419-422, 3.
|
| [2] |
S. Kamado, J. Koike, K. Kondoh and Y. Kawamura: Mater. Sci. Forum, 2003, 419-422, 21.
|
| [3] |
H. Friedrich and S.J. Schumann: Mater. Process. Technol., 2001, 117, 276.
|
| [4] | S.M. Yin, H.J. Yang, S.X. Li, S.D. Wu and F. Yang: Scripta Mater., 2008, 58, 451. |
| [5] |
S.M. Yin, F. Yang, X.M. Yang, S.D.Wu, S.X. Li and G.Y. Li: Mater. Sci. Eng. A, 2008, 494, 397.
|
| [6] |
W.J. Kim, C.W. An, Y.S. Kim and S.I. Hong: Scripta Mater., 2002, 47, 39.
|
| [7] |
A. Styczynski, C. Hartig, J. Bohlen and D. Letzig: Scripta Mater., 2004, 50, 943.
|
| [8] |
T. Liu, Y.D. Wang, S.D. Wu, L. Peng, C.X. Huang, C.B. Jiang and S.X. Li: Scripta Mater., 2004, 51, 1057.
|
| [9] | C. Davies and M. Barnett: JOM, 2004, 56, 22. |
| [10] | C. Bettles and M. Gibson: JOM , 2005, 57, 46. |
| [11] |
J. L¶evesque, K. Inal, K.W. Neale and R.K. Mishra: Int. J. Plasticity, 2010, 26, 65.
|
| [12] |
S. Hasegawa, Y. Tsuchida, H. Yano and M. Matsui: Int. J. Fatigue, 2007, 29, 1839.
|
| [13] |
H. Zenner and F. Renner: Int. J. Fatigue, 2002, 24, 1255.
|
| [14] | Y. Chino, K. Kimura, M. Hakamada and M. Mabuchi: Mater. Sci. Eng. A, 2008, 485(1-2), 311. |
| [15] |
M.R. Barnett, Z. Keshavarz, A.G Bee and D. Atwell: Acta Mater., 2004, 52, 5093.
|
| [16] |
M. Furukawa, Y. Iwahashi, Z. Hortia, M. Nemoto and T.G. Langdon: Mater. Sci. Eng. A, 1998, 257, 328.
|
| [17] |
W.J. Kim and H.J. Jeong: Mater. Sci. Forum, 2003, 419-422, 201.
|
| [18] |
S.R. Agnew, J.A. Horton, T.M. Lillo and D.W. Brown: Scripta Mater., 2004, 50, 377.
|
| [19] |
S. Hidetoshi and M. Toshiji: Scripta Mater., 2006, 54, 633.
|
| [20] | B.C. Wonsiewicz and W.A. Backofen: Trans. TMSAIME, 1967, 239, 1422. |
| [21] |
L Jiang, J.J. Jonas, A.A Luo, A.K Sachdev and S. Godet: Scripta Mater., 2006, 54, 771.
|
| [22] | J. Koike and R. Ohyama: Acta Mater., 2005, 53, 1963. |
| [23] |
S.R. Agnew, C.N. Tome, D.W. Brown, T.M. Holden and S.C. Vogel: Scripta Mater., 2003, 48, 1003.
|
| [24] |
S.B. Yi, Brokmeier, R.E. Bbormaro, K.U. Kainer and T. Lippmann: Scripta Mater., 2004, 51, 455.
|
| [25] |
S.R. Agnew and O. Duygulu: Int. J. Plasticity, 2005, 21, 1161.
|
| [26] |
Y.N. Wang and J.C. Huang: Acta Mater., 2007, 55, 897.
|
| [27] |
Y.N. Wang and J.C. Huang: Mater. Chem. Phys., 2003, 81, 11.
|
| [28] |
S. Kleiner and P.J. Uggowitzer: Mater. Sci. Eng. A, 2004, 379, 258.
|
| [29] |
E.A. Ball and P.B. Prangnell: Scripta Metall. Mater., 1994, 31, 111.
|