EFFECT OF ALLOY ELEMENTS ON QUASIEQUILIBRIUM MICROSTRUCTURE IN Fe-Mn-Ni-Cr STEELS

Abstract

Abstract: The microstructures of Fe-Mn-Ni-Cr steels with medium carbon and the effect of alloy ele- ments on them have been investigated by means of X-ray diffraction quantitative phase ana- lyses,metallography and hardness tests.The volume fraction of martensite in steels quenched at 1100℃ can be expressed as: f_M~(1100)=162.643-15.482Mn-7.36Ni-4.286(Cr+Mo+V) Based on this expression,the quasi-equilibrium microstructure diagram has been obtained.It is shown that the effect of Mn on the austenite stability is greater than that of Ni.The equiva- lent [Ni]=2.104Mn+Ni and equivalent [Cr]=Cr+Mo+V. The driving force for martensite transformation at M_s point has been calculated to he drastically decreased by element Mn.

Key words: quasi-equilibrium microstructure diagram, martensitic transformation, driving force, multi-factor regression analysis

XIE Changsheng SUN Peizhen ZHAO Jiansheng CHEN Yuqiu Huazhong University of Science and Technology,Wuhan,China XIE Changsheng Associate Professor,Department of Mechanical Engineering No.2,Huazhong University of Science and Technology,Wuhan 430074,China. EFFECT OF ALLOY ELEMENTS ON QUASIEQUILIBRIUM MICROSTRUCTURE IN Fe-Mn-Ni-Cr STEELS[J]. Acta Metallurgica Sinica (English Letters), 1990, 3(1): 52-57.

[1]	Yakui Chen, Shitong Wei, Dong Wu, Shanping Lu. Effects of Aging at 550 °C on α′-Martensitic Transformation of High Si-Bearing Metastable Austenitic Stainless Steel Weld Metal [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(9): 1467-1479.
[2]	Jin-Wang Liu, Xian Luo, Bin Huang, Yan-Qing Yang, Wen-Jie Lu, Xiao-Wei Yi, Hong Wang. Nano-Twinning and Martensitic Transformation Behaviors in 316L Austenitic Stainless Steel During Large Tensile Deformation [J]. Acta Metallurgica Sinica (English Letters), 2023, 36(5): 758-770.
[3]	E. E. Timofeeva, E. Yu. Panchenko, A. S. Eftifeeva, A. I. Tagiltsev, N. Yu. Surikov, A. B. Tokhmetova, E. I. Yanushonite, M. V. Zherdeva, I. Karaman, Yu. I. Chumlyakov. Cyclic Stability of Superelasticity in [001]-Oriented Quenched Ni₄₄Fe₁₉Ga₂₇Co₁₀ and Ni₃₉Fe₁₉Ga₂₇Co₁₅ Single Crystals [J]. Acta Metallurgica Sinica (English Letters), 2023, 36(4): 650-660.
[4]	Yu Zhang, Jing Bai, Ziqi Guan, Xinzeng Liang, Yansong Li, Jianglong Gu, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo. Phase Stability, Magnetic Properties, and Martensitic Transformation of Ni₂₋_xMn₁₊_x₊_ySn₁₋_y Heusler Alloy with Excess Mn by First-Principles Calculations [J]. Acta Metallurgica Sinica (English Letters), 2023, 36(3): 513-528.
[5]	Zuohua Wang, Haidong Sun, Peng Wang, Ning Liu, Pinwen Zhu, Dongli Yu, Hongwang Zhang. {112} 〈111〉 Twins or Twinned Variants Induced by Martensitic Transformation? [J]. Acta Metallurgica Sinica (English Letters), 2023, 36(1): 133-140.
[6]	Jian-Bin Zhan, Yan-Jin Lu, Jin-Xin Lin. On the Martensitic Transformation Temperatures and Mechanical Properties of NiTi Alloy Manufactured by Selective Laser Melting: Effect of Remelting [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(9): 1223-1233.
[7]	Pengfei Gao, Weijian Chen, Feng Li, Beijia Ning, Zhengzhi Zhao. Quasi-Situ Characterization of Deformation in Low-Carbon Steel with Equiaxed and Lamellar Microstructure Treated by the Quenching and Partitioning Process [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1657-1665.
[8]	Li-Na Wang, Ping Yang, Ting Jin, Wei-Min Mao. Different Mechanisms of ε-M and α′-M Variant Selection and the Influencing Factors of ε-M Reversion During Dynamic Tension in TRIP Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(5): 449-455.
[9]	Zhong-Yuan Feng, Xin-Jie Di, Shi-Pin Wu, Dong-Po Wang, Xiao-Qian Liu. Comparison of Microstructure and Residual Stress Between TIG and MAG Welding Using Low Transformation Temperature Welding Filler [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(3): 263-272.
[10]	Hai-Yan Yang, Jing Li, Ping Yang. The Change of Orientation Relationships Between Austenite and α′-Martensite During Deformation in High Manganese TRIP Steel [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(3): 289-294.
[11]	Xi-Feng Li, Wei Ding, Jian Cao, Li-Yan Ye, Jun Chen. In Situ TEM Observation on Martensitic Transformation during Tensile Deformation of SUS304 Metastable Austenitic Stainless Steel [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(3): 302-306.
[12]	Xi-Li Lu, De-Xi Su, Feng Chen, Wei-Li Liu, Yang-Guang Shi, Yun-Xiang Tong, Li Li. Martensitic Transformation and Its Thermal Cycling Stability in Ni₅₆Mn₂₁Cu₄Ga₁₉ High-Temperature Shape Memory Ribbon [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(2): 243-248.
[13]	Anna Churakova, Dmitry Gunderov, Alexander Lukyanov, Niklas Nollmann. Transformation of the TiNi Alloy Microstructure and the Mechanical Properties Caused by Repeated B2-B19′ Martensitic Transformations [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(10): 1230-1237.
[14]	Ke Zhang, Ping Liu, Wei Li, Zheng-Hong Guo, Yong-Hua Rong. High Strength-Ductility Nb-microalloyed Low Martensitic Carbon Steel: Novel Process and Mechanism [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(10): 1264-1271.
[15]	Mustafa Türkmen, Süleyman Gündüz. Bake-Hardening Response of High Martensite Dual-Phase Steel with Different Morphologies and Volume Fractions [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(2): 279-289.

EFFECT OF ALLOY ELEMENTS ON QUASIEQUILIBRIUM MICROSTRUCTURE IN Fe-Mn-Ni-Cr STEELS

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments